Kobalt KHB 4124B-03 Manual de usuario
JW18121
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-888-3KOBALT (1-888-356-2258), 8 a.m. - 8 p.m., EST,
Monday - Friday.
ATTACH YOUR RECEIPT HERE
Serial Number Purchase Date
ITEM #1157558/0856455/0726981/0856457
BRUSHLESS BLOWER
MODEL #KHB 4124B-03
Español p. 13
WARNING Read all safety warnings and instructions. Failure to follow the warnings and
instructions may result in electric shock, re and/or serious injury.
2
TABLE OF CONTENTS
Product Specications...................................................................................... 2
Package Contents............................................................................................3
Safety Information............................................................................................4
Preparation....................................................................................................... 7
Assembly Instructions ......................................................................................8
Operating Instructions.................................................................................... 10
Care and Maintenance................................................................................... 11
Troubleshooting.............................................................................................. 12
Warranty.........................................................................................................12
PRODUCT SPECIFICATIONS
COMPONENT SPECIFICATION
Rated voltage 24V d.c.
Air volume 410 CFM
Air speed (Max.) 100 MPH
3
PACKAGE CONTENTS
A
B C
D
PART DESCRIPTION PART DESCRIPTION
A Blower tube C Variable-speed trigger switch
B Trigger-lock lever D Hanging hole
WARNING
• Remove the tool from the package and examine it carefully. Inspect the tool carefully to
make sure that no breakage or damage occurred during shipping. If any parts are damaged
or missing, please return the product to the place of purchase. Do not discard the carton or
any packaging material until all parts have been examined.
• If any part of the tool is missing or damaged, do not attach the battery pack or use the tool
until the part has been repaired or replaced. Failure to heed this warning could result in
serious injury.
4
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble or operate
this product. If you have any questions regarding the product, please call customer service at
1-888-3KOBALT, 8 a.m. - 8 p.m., EST, Monday - Friday.
WARNING
• The operation of any power tool can result in foreign objects being thrown into your eyes,
which can result in severe eye damage. Before beginning power-tool operation, always wear
safety goggles or safety glasses with side shields and a full-face shield, when needed. It is
recommended to use a wide vision safety mask over eyeglasses or standard safety glasses
with shields. Always use eye protection marked to comply with ANSI Z87.1.
• Some dust created by power sanding, sawing, grinding, drilling, and other construction
activities contains chemicals known to the state of California to cause cancer, birth defects,
or other reproductive harm. Some examples of these chemicals are:
– Lead from lead-based paints
– Crystalline silica from bricks, cement, and other masonry products
– Arsenic and chromium from chemically-treated lumber
• Your risk from these exposures varies, depending upon how often you do this type of work.
To reduce your exposure to these chemicals:
– Work in a well-ventilated area.
– Work with approved safety equipment, such as dust masks that are specially designed to
lter out microscopic particles.
– Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and
other construction activities. Wear protective clothing and wash exposed areas with soap
and water. Allowing dust to get into your mouth or eyes or to lie on the skin may promote
absorption of harmful chemicals.
DANGER
• People with electronic devices, such as pacemakers, should consult their physician(s)
before using this product. Operation of electrical equipment in close proximity to a heart
pacemaker could cause interference or failure of the pacemaker.
Know the Tool
To operate this tool, carefully read this manual and all labels afxed to the tool before using it.
Keep this manual available for future reference.
Important
This tool should be serviced only by a qualied service technician.
Read All Instructions Thoroughly
5
SAFETY INFORMATION
Some of the following symbols may be used on this tool. Please study them and their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and more safely.
SYMBOL DEFINITION SYMBOL DEFINITION
V Volts n0No-load Speed
A Amps CFM Cubic Feet per Minute
WARNING- To reduce
the risk of injury, user
must read instruction
manual.
Direct Current
When using an electrical appliance, basic precautions should always be followed, including the
following: READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT!
WARNING
• To reduce risk of re, electric shock, or injury:
• Know your power blower. Read the instruction manual carefully. Learn the blower’s
applications and limitations, as well as the specic potential hazards related to this
blower. Following this rule will reduce the risk of electric shock, re, or serious injury.
• Do not use in rain.
• Do not allow the blower to be used as a toy. Close attention is necessary when used by
or near children.
• Use only as described in this manual. Use only manufacturer’s recommended
attachments.
• Do not handle the charger, including charger plug, or charger terminals with wet
hands.
• Do not put any object into any openings. Do not use with any opening blocked; keep
openings free of dust, lint, hair, and anything that may reduce air ow.
• Keep hair, loose clothing, ngers, and all parts of body away from openings and
moving parts. Loose clothes, jewelry, or long hair can be drawn into air vents.
• Use extra care when cleaning on stairs.
• Do not charge the battery pack outdoors.
• Use only the charger supplied by the manufacturer to recharge.
• Do not incinerate the appliance even if it is severely damaged. The batteries can
explode in a re.
• Prevent unintentional starting. Ensure the switch is in the “off” position before
connecting to battery pack, picking up or carrying the appliance. Carrying the
appliance with your nger on the switch or energizing appliance that have the switch on
invites accidents.
• Disconnect the battery pack from the appliance before making any adjustments,
changing accessories, or storing appliance. Such preventive safety measures reduce
the risk of starting the appliance accidentally.
• Use the battery operated blower only with specically designated battery pack. Use of
any other batteries may create a risk of re.
6
SAFETY INFORMATION
• Use only with battery packs and chargers listed below.
BATTERY PACK CHARGER
KB 124-03; KB 224-03; KB 424-03;
KB 524-03; KB 624-03; KB 924-03
KRC 2445-03
KRC 2490-03
• Do not use a battery pack or appliance that is damaged or modied. Damaged or
modied batteries may exhibit unpredictable behavior resulting in re explosion or risk of
injury.
• Do not expose a battery pack or appliance to re or excessive temperature. Exposure
to re or temperature above 130°C may cause explosion.
• Follow all charging instructions and do not charge the battery pack or appliance
outside of the temperature range specied in the instructions. Charging improperly or
at temperatures outside of the specied range may damage the battery and increase the
risk of re.
• Have servicing performed by a qualied repair person using only identical
replacement parts. This will ensure that the safety of the product is maintained.
• Do not modify or attempt to repair the appliance or the battery pack except as
indicated in the instructions for use and care.
• Do not operate blowers in explosive atmospheres, such as in the presence of
ammable liquids, gases, or dust. Blowers create sparks which may ignite the dust or
fumes.
• Stay alert, watch what you are doing and use common sense when operating a power
blower. Do not use the blower while tired, upset, or under the inuence of drugs,
alcohol, or medication. A moment of inattention while operating blowers may result in
serious personal injury.
• Do not use on a ladder, rooftop, tree, or other unstable support. Stable footing on a
solid surface enables better control of the blower in unexpected situations.
• Keep rm footing and balance. Do not overreach. Overreaching can result in loss of
balance.
• Always take care of your feet, children, or pets around you when removing the battery
pack from blower. NEVER remove the battery pack when in a high position. Serious
injury could result if the battery pack falls.
• Do not use the blower if switch does not turn it on or off. A blower that cannot be
controlled with the switch is dangerous and must be repaired.
• Check for misalignment or binding of moving parts, breakage of parts, and any
other condition that may affect the blower’s operation. If damaged, have the blower
serviced before using. Many accidents are caused by poorly maintained blowers.
• Keep the blower and its handle dry, clean and free from oil and grease. Always use
a clean cloth when cleaning. Never use brake uids, gasoline, petroleum-based
products, or any strong solvents to clean your blower. Following this rule will reduce the
risk of loss of control and deterioration of the enclosure plastic.
• Use safety equipment. Always wear eye protection with side shields marked to
comply with ANSI Z87.1 along with hearing protection when operating this equipment.
Everyday glasses have only impact resistant lenses. They are NOT safety glasses.
Following this rule will reduce the risk of eye injury.
• Protect your lungs. Wear a face or dust mask if the operation is dusty. Following this
rule will reduce the risk of serious personal injury.
• Protect your hearing. Wear hearing protection during extended periods of operation.
Following this rule will reduce the risk of serious personal injury.
• Wear heavy long pants, long sleeves, boots, and gloves. Avoid loose garments or
jewelry that could get caught in moving parts of the machine or its motor.
7
SAFETY INFORMATION
• Do not operate the equipment while barefoot or when wearing sandals or similar
lightweight footwear. Wear protective footwear that will protect your feet and improve your
footing on slippery surfaces.
• Check the work area before each use. Remove all objects such as rocks, broken glass,
nails, wire, or string which can be thrown by or become entangled in the machine.
• Do not point the blower tube in the direction of people or pets.
• Never run the unit without the proper equipment attached. Always ensure that the
blower tube is installed.
• When not in use, the blower should be stored indoors in a dry, secure place out of the
reach of children.
• Keep all bystanders, children, and pets at least 50 ft. away.
• Never use the blower near res or hot ashes. Use near res or ashes can spread res
and result in serious injury and/or property damage.
• Never use blower to spread chemicals, fertilizers, or any other toxic substances.
Spreading these substances could result in serious injury to the operator or bystanders.
• Never place the blower on any surface, except a hard, clean surface when the engine
is running. Gravel, sand, and other debris can be picked up by the air inlet and thrown at
the operator or bystanders, causing possible serious injuries.
• Save these instructions. Refer to them frequently and use them to instruct others who may
use this tool. If you loan this tool to someone else, also loan these instructions to them to
prevent misuse of the product and possible injury.
SAVE THESE INSTRUCTIONS!
PREPARATION
Know Your Blower
This blower can be used for the purposes listed: Clearing hard surfaces, such as driveways and
walkways. Keeping decks and driveways free from leaves and pine needles.
Before attempting to use the blower, familiarize yourself with all of its operating features and
safety requirements.
WARNING
• Do not allow familiarity with the tool to cause carelessness. Remember that one careless
moment is enough to cause severe injury. Before attempting to use any tool, be sure to
become familiar with all of the operating features and safety instructions.
• Do not attempt to modify this tool or create accessories not recommended for use with this
tool. Any such alteration or modication is misuse and could result in a hazardous condition
leading to possible serious personal injury.
8
ASSEMBLY INSTRUCTIONS
1. Assembling the Blower Tube
This product requires assembly before using.
WARNING
• To prevent accidental starting that could cause
serious personal injury, always remove the
battery pack from the tool when assembling parts.
a. Align the groove in the blower tube (A) with the
knob on the blower housing. Push the tube
onto the blower housing.
b. Rotate the blower tube counterclockwise until
a “click” is heard to signal that the knob has
locked into place.
c. Make sure that the 24V MAX mark is facing
upward after assembly, otherwise the tube is
not secured to the blower. If necessary, remove
the tube and align the opposite groove with the
knob to install the tube properly.
d. To remove the blower tube, rotate the blower
tube clockwise approximate 90°, then pull it
straight out from the blower.
1a
1b
1c
9
ASSEMBLY INSTRUCTIONS
2. To Install/Remove Battery Pack
To Attach Battery Pack
a. Make sure that the variable-speed trigger
switch (C) is in OFF position and the trigger-
lock lever (B) is in the OFF position.
b. Align the raised portion on the battery pack
(not included) with the grooves on the bottom
of the tool, then slide the battery pack onto the
tool as shown.
c. Ensure that the battery-release buttons on the
battery pack snap into place and the battery
pack is secured to the tool before beginning
operation.
NOTICE: When placing the battery pack on the
tool, be sure that the raised rib on the battery pack aligns with the groove on the tool and the
latches snap into place properly. Improper assembly of the battery pack can cause damage to
internal components.
To Detach Battery Pack
a. Make sure that the variable-speed trigger switch (C) is in OFF position and the trigger lock
(B) is in the OFF position.
b. Press the battery-release buttons to release the battery pack.
c. Pull upward on the battery pack to remove it from the tool.
WARNING
• Battery tools are always in operating condition. Therefore, the trigger lock should always in
OFF position when the tool is not in use or when carrying the tool at your side.
2
B C
Battery-release
button
10
OPERATING INSTRUCTIONS
1. To Start/Stop the Blower
The variable-speed trigger switch (C) can turn the
blower ON/OFF and deliver variable speed. The
blower is also equipped with a trigger-lock lever (B)
to turn the blower ON/OFF, and lock the blower at a
certain speed.
To Turn the Blower ON
a. To turn the blower ON, depress the variable-
speed trigger switch (C).
b. The variable-speed trigger switch delivers
higher speed with increased trigger pressure
and lower speed with decreased trigger
pressure.
c. To lock the blower on a certain speed, move the
trigger-lock lever (B) toward the back of the tool.
d. The trigger-lock lever can also be pulled back to start the blower without needing to rst
depress the variable-speed trigger switch. The blower runs at higher speeds as the lever is
moved further back.
To Turn the Blower OFF
a. If the trigger-lock lever (B) is not engaged, release the variable-speed trigger switch (C).
b. If the trigger-lock lever is engaged, move the trigger-lock lever forward to the unlocked
position.
2. Hanging hole
The blower is equipped with a hanging hole (D).
The blower can be hung from a screw or nail for
storage.
3
B
C
4
D
Otros manuales para KHB 4124B-03
1
Tabla de contenidos
Idiomas:
Otros manuales de Soplador de Kobalt
Kobalt
Kobalt KHB 4124B-03 Manual de usuario
Kobalt
Kobalt KLB 1040B-03 Manual de usuario
Kobalt
Kobalt KHB 400B-06 Manual de usuario
Kobalt
Kobalt KJB 124B-03 Manual de usuario
Kobalt
Kobalt KBB 600B-06 Manual de usuario
Kobalt
Kobalt A071006 Manual de usuario
Kobalt
Kobalt KHB 2024B-03 Manual de usuario
Kobalt
Kobalt 0533629 Manual de usuario
Kobalt
Kobalt KHB 6380-06 Manual de usuario
Kobalt
Kobalt KOC 0281-06 Manual de usuario
