Klip Xtreme Harmonium KSB-001 Manual de usuario

KSB-001

Harmonium

English

I. Introduction

Main features

II. Package content

Congratulations on the purchase of your new KlipXtreme®KSB-001 soundbar

with Bluetooth®wireless technology.

We invite you to visit us at www.klipxtreme.com for support and to find out

more about this audio system and other new and exciting products.

To get the most of your new soundbar, please take a few minutes to read the

following instructions and familiarize yourself with the operation of the unit.

Before setting up the device, make sure that the following items are included in

the box:

Unpack your unit carefully. We recommend that you save the box and all original

packing materials, in case you wish to store the unit, or if you ever need to return

it for service.

• 32-inch 2.0 channel soundbar with a modern and space-saving design, which

delivers high quality audio from wired or wireless devices

• 100 watts of total power output through two powerful 2-inch drivers

• Optical digital input and auxiliary 3.5mm jack with cables included

• Two full range 2in drivers and a passive bass booster tube deliver deep bass

• HDMI Arc connection to watch visual content in a large screen

• Bluetooth®v5.0 functionality to stream music wirelessly from compatible

devices within a range of up to 33 feet

• LED display showcases the selected mode

• Desktop or wall mount design for versatile configuration

• Remote control with EQ sound profiles

• Soundbar (1)

• 3.5mm to RCA audio cable (1)

• Digital optical cable (1)

• Remote control with batteries (1)

• AC/DC adapter (1)

• Quick instruction guide (1)

HDMI/ARC OPTI USB AUX IN DC IN

Back panel

Side panel

III. Product overview

1. Power button

2. Play/pause

3. Play previous/volume –

4. Play next/volume +

1. HDMI input

2. Optical input

3. USB port

4. Aux input

5. Power input

Control Description

1. Power/mode Press this button to power, press and hold to turn it off.

Press this button to select the audio input mode for playback.

1 2 3 4 5

Press this button to play or pause audio playback. It doesn’t

work in Auxiliary mode.

Press and hold this button to play the previous track. Press

it to decrease the volume level.

3.Vol.-

Press and hold this button to play the next track. Press

once to increase the volume level.

4.Vol.+

Remote control

An infrared remote control is included which provides additional functions to

allow greater control over the soundbar.

Note: Install the supplied batteries in the remote control following the correct

polarity as indicated inside the compartment. In order for the remote to operate

properly, ensure that it is pointed toward the front of the soundbar.

VOL+

VOL-

BASS+

BASS-

PAIR INPUT

TREB- TREB+

MUTE

IV. Preliminary steps

21in

1. The soundbar can be placed on a desktop or hanged on the wall.

2. If you decide to mount the soundbar on the wall, determine the location and

mark the holes on the surface. The drilled holes must be placed about 21

inches apart from each other.

3. For gypsum or wooden walls, locate studs in the wall. You may use a stud

finder to determine the center of each stud.

4. Drill pilot holes and insert anchors if installing the unit on a concrete or brick

wall.

Buttons Description

1. Power button

2. Pair button

Press this button briefly to turn the soundbar on or off.

Press this button to connect or disconnect the paired

Bluetooth®device.

3. Mode button Press this button to switch modes through Bluetooth®,

HDMI (Arc), USB, Aux, and optical.

4 . Vol . + Press the Vol + button to increase the volume coming from

the soundbar.

5. Previous track Press this button to select the previous track on your

playlist. Available in BT and USB modes.

6. Play/pause Press this button to play or pause the audio coming from

the soundbar. Available in BT and USB modes.

7. Next track Press this button to select the next track on your playlist.

Available in BT and USB modes

8 . Vol . - Press the Vol - button to lower the volume coming from

the soundbar.

Buttons Description

9. Treb. - Press this button to decrease (high) frequencies of the

soundbar. Available in all modes.

10. EQ button Press this button to select the equalizer profile of your

choice (EQ0, EQ1, EQ2). Available in all modes.

EQ0: News and dialogue mode

EQ1: Music mode

EQ2: Movie mode

11.Treb. + Press this button to increase (high) frequencies of the

soundbar. Available in all modes.

12. Bass - Press this button to decrease (low) frequencies of the

soundbar. Available in all modes.

13. Bass + Press this button to increase (low) frequencies of the

soundbar. Available in all modes.

14. Mute Mutes the audio coming from the soundbar. Press it again

to unmute the soundbar.

V. Optical digital and Auxiliary connections

1. Insert one end of the supplied optical digital cable into the matching input jack

on the back of the soundbar and the other end on the device you wish to play

audio from.

2. For Aux wired playback, connect one end of the supplied auxiliary cable to the

corresponding port on the soundbar and the other end to audio devices fitted

with a 3.5mm jack.

3. Plug the AC cable into a wall outlet.

4. Turn on the soundbar by pressing the Power button located on the right side

panel of the unit. You can also press the red Power button on the remote

control.

5. Select the input mode by pressing the Mode button located on the right-side panel.

6. Using the controls on the remote, you can manage and select your tracks,

increase, or lower the volume, mute the sound bar audio, etc.

5. Drive the screws into the holes with a screwdriver, leaving some space

between the head and the wall surface.

6. Make all the necessary cable connections before mounting the soundbar on

the wall (Aux. or Optical input cables).

7. Once all connections have been completed, carefully slide the soundbar over

the screws you just installed.

8. Now you can plug the AC cord of the soundbar into a wall outlet and the

soundbar is ready to use.

Note: Before installing this product, please make sure your device is compatible

with Bluetooth®.

1. First turn on the soundbar by pressing the Power button on the side panel

or on the remote control. Bluetooth®(BT) is the selected mode by default. Or

select the BT mode by pressing the mode selection button in the remote control.

The BT indication will appear on the LED display

2. Place both devices not more than three feet away from each other.

3. Enable the Bluetooth®function on your audio device and set it to discover the

wireless soundbar.

4. The BT icon will start blinking to indicate that the system has entered into the

pairing mode.

5. Once the soundbar appears listed under the newly found Bluetooth®devices

(KSB-001), the pairing process will start.

6. If pairing is successful, the voice prompt “Bluetooth connected” will be heard.

7.If after 60 seconds the pairing process fails, please repeat steps 1 through 6

described above.

- The unit is not turning on. Check and make sure the power cord is connected

correctly to the power source.

- There is no sound coming from the soundbar, or the sound is distorted. Make

sure the audio cable is connected correctly. Turn up the volume slowly. Press

the mute button in case it was pressed accidentally muting the soundbar.

- The remote control doesn’t work. Install two AAA batteries in the remote.

Replace the current batteries with new ones. Point the remote control toward

the front of the soundbar; and make sure it is within the operating range.

- The buttons on the soundbar don’t work. Unplug the soundbar, plug it to a

power supply and turn it on again.

Pairing the sound bar with your Bluetooth®device

VI. Advanced operation Troubleshooting

VII. Technical specications

MPN KSB-001

2.0 channel soundbar

100W

Yes, 0.4W

110-240V -- 50/60Hz (autosensing)

Power/mode, pause/resume, play previous/volume -,

play next/volume +

Device

Type

Reference RMS

Standby mode

AC input

Buttons

2x 2in full range drivers + a passive bass booster tube

50Wx2=100W

45Hz-20kHz

4Ωx2

</=1%(1K/1W)

≥ 72dB

Bluetooth® v5.0 compatible, USB input

HDMI (ARC), optical digital, 3.5mm Auxiliary

2.4GHz

33ft

Speaker

Driver unit

Maximum power output (RMS)

Frequency

Impedance

Sensitivity

Signal to noise ratio

Connectivity

Connection type

Audio input ports

Wireless frequency

Wireless range

Additional information

Display

Equalizer

Dimensions (WxDxH)

LED

Yes, preset

31.6x2.3x2.3in

Additional information

Weight

Cable length

Package contents

Warranty

2.6lb

5ft

Soundbar, Auxiliary cable, digital optical cable,

remote control, quick instruction guide, AAA batteries,

AC/DC adapter

One year

NOTES

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC statement

Español

I. Introducción

Características

II. Contenido del empaque

Felicitaciones por la compra de su nueva barra de sonido KSB-001 , de

KlipXtreme®con tecnología inalámbrica Bluetooth®.

Lo invitamos a visitar nuestra página web en www.klipxtreme.com en caso de

solicitar asistencia o si desea conocer más acerca de este sistema de audio y

otros innovadores productos

Para aprovechar al máximo este sistema de parlantes, tómese unos minutos para

leer las siguientes instrucciones y familiarizarse con el funcionamiento de la

unidad. Antes de conectar el dispositivo, verifique que los artículos a continuación

hayan sido incluidos en el empaque:

Remueva cuidadosamente el aparato de la caja. Es recomendable que conserve la

caja y todo el empaque original si pretende almacenar la unidad o en caso de

necesitar enviarla para recibir servicio técnico.

• Barra de sonido de 2.0 canales de 32 pulgadas con diseño moderno y que

propicia el ahorro de espacio para reproducir audio de excelente calidad

desde dispositivos inalámbricos o alámbricos

• 100 watts de potencia total de salida a través de dos poderosos parlantes de

2 pulgadas

• Entrada óptica digital y de 3,5mm con cables incluidos

• Dos parlantes de 2 pulgadas y un tubo con refuerzo de bajos proporcionan

bajos profundos

• Entrada HDMI Arc para ver contenido visual en pantalla grande

• Funcionalidad Bluetooth®v5.0 para reproducir música inalámbricamente desde

dispositivos compatibles a una distancia de hasta 10 metros

• Pantalla LED que muestra el modo seleccionado

• Diseño de configuración versátil para colocar sobre una superficie o montar

en la pared

• Control remoto permite escoger perfiles de sonido mediante el ecualizador

• Barra de sonido (1)

• Cable de audio 3,5mm a RCA (1)

• Cable óptico digital (1)

• Control remoto con baterías (1)

• Adaptador de CA/DC (1)

• Guía de instalación rápida (1)

Tabla de contenidos

Idiomas:

Otros manuales de Sistema de altavoces de Klip Xtreme

Klip Xtreme

Klip Xtreme UltraBoom Portable KLS-875 Manual de usuario

Klip Xtreme

Klip Xtreme Tempo Manual de usuario

Klip Xtreme

Klip Xtreme BluFusion KWS-710 Manual de usuario

Klip Xtreme

Klip Xtreme Charme 2 KLS-651 Manual de usuario

Klip Xtreme

Klip Xtreme KSB-200 Manual de usuario

Klip Xtreme

Klip Xtreme Cinematik KWS-760 Manual de usuario

Klip Xtreme

Klip Xtreme Zaffire KSB-500 Manual de usuario

Klip Xtreme

Klip Xtreme UltraBoom Pro Manual de usuario

Klip Xtreme

Klip Xtreme Boom Bar Manual de usuario

Klip Xtreme

Klip Xtreme MagBlaster Pro Manual de usuario

Klip Xtreme

Klip Xtreme Mirage Manual de usuario

Klip Xtreme

Klip Xtreme Duet KFS-600 Manual de usuario

Klip Xtreme

Klip Xtreme Zynk KSB-260 Manual de usuario

Klip Xtreme

Klip Xtreme BluPulse KWS-651 Manual de usuario

Klip Xtreme

Klip Xtreme ZounDtastik KLS-670 Manual de usuario

Klip Xtreme

Klip Xtreme BluBlade KSB-100 Manual de usuario

Klip Xtreme

Klip Xtreme MystiK Manual de usuario

Klip Xtreme

Klip Xtreme Baton Manual de usuario

Manuales populares de Sistema de altavoces de otras marcas

JVC

JVC CA-MXK5R Manual de usuario

LG NB4532B Manual de usuario

JVC

JVC CA-FSH100 Manual de usuario

5Core

5Core Pro Series Manual de usuario

EAW

EAW MQV1394e Manual de usuario

Lynx

Lynx GXR-LA10A Manual de usuario

iLive

iLive ITB066B Manual de usuario

RDX

RDX QuickStation 4 Manual de usuario

Electro-Voice

Electro-Voice S-122 Manual de usuario

Sven

Sven SPS-619 GOLD Manual de usuario

Pioneer

Pioneer CS-7070 Manual de usuario

EAW

EAW UB82e Manual de usuario

Sondpex

Sondpex Active Speaker System and Digital Music... Manual de usuario

JVC

JVC NX-PN7 Manual de usuario

Marshall Amplification

Marshall Amplification AR-DM61-BT Manual de usuario

Yamaha

Yamaha NX-A01 - Speaker Sys Manual de usuario

SE Audiotechnik

SE Audiotechnik I-LINE Manual de usuario

Gemini

Gemini WRX-843 Series Manual de usuario