Klip Xtreme Baton Manual de usuario

KSB-200

Baton

English

I. Introduction

Main features

II. Package content

Congratulations on the purchase of your new Klip Xtreme®KSB-200 Soundbar

with wireless technology.

We invite you to visit us at www.klipxtreme.com for support and to find out more

about this audio system and other new and exciting products.

To get the most of your speaker system, please take a few minutes to read the

following instructions and familiarize yourself with the operation of the unit.

Before setting up the device, make sure that the following items are included

in box:

Unpack your unit carefully. We recommend that you save the box and all original

packing materials, in case you wish to store the unit, or if you ever need to return

it for service.

2.0 channel surround sound system that combines a bold design,

wireless technology and great acoustic quality

120W of output power through two 2.5-inch drivers

SPL of 95dB with a THD below 1%

Compatible with all subwoofers that have an RCA connection

Immaculate audio playback from wired or wireless devices

3D surround sound effects to digitally optimize your audio

When TV is turned on, the soundbar will automatically come out of

standby mode

Front control panel

Convenient remote control

RCA and auxiliary line-in jacks

Desktop or wall mount design

•

Soundbar

3.5mm stereo female to two RCA stereo male cable

RCA male to RCA male cable

3.5mm to 3.5mm cable

Remote control with battery

Hardware mounting kit

Quick installation guide

•

(1)

Back panel

Front panel

III. Product overview

Control Description

1. LED indicator

2. Standby

4. Source

5. LED indicator

- Glows red whenever the device is in standby mode

- Glows white when RCA has been selected as input

- Glows orange when Aux in has been selected as input

- Flashes red when the sound is muted

Press this button briey to toggle among the

available input modes on the speaker: RCA, auxiliary

in and Bluetooth®

Press and hold to turn on the wireless function

Press this button to switch the device on from

standby to active mode, and back o again

Press these buttons to increase or lower the audio

level coming from the soundbar

The blue LED starts blinking fast when the device

has entered into the pairing mode

Connectors Description

1. AUX input The stereo jack allows the connection of external

audio devices tted with a 3.5mm plug

Provides a dedicated RCA connection for an external

subwoofer

2. RCA input

3. Sub output

Insert the power cord plug in an AC outlet5. AC power cord

Turns the Soundbar on and o4. Main power switch

Provides the audio connection for a high denition TV,

DVR, game console, a cable box or other compatible

devices

AUX IN

OFF

POWER

RCA INPUT SUB OUT

Model No. KSB-200

SOURCE

BT 3D

AUX

Remote control

IV. Preliminary steps

The soundbar can be placed on a destktop or hang on the wall.

If you decide to mount the soundbar on the wall, determine the location and

mark the holes on the surface. Drill holes must be placed 64 centimeters apart

from each other.

Buttons Description

8. Takes you back to the previous track on your play list.

This feature is only available in Bluetooth® mode

9. Press to start and pause media. This feature is only

available in Bluetooth® mode

10. Takes you to the next track on your play list.

This feature is only available in Bluetooth® mode

For gypsum or wooden walls, locate studs in the wall. You may use a stud

finder to determine the center of each stud.

Buttons Description

1. Standby button

2. Mute button

4. 3D button

5. Aux in button

6. TV button

3. BT button

Press this button to toggle between the standby

and active modes on the device

Cancels the audio coming from the speaker. Press it

again to unmute the speaker

Press this button to select the source device

connected to the 3.5mm input jack

Enables the surround sound eect for a digitally

optimized audio

Press this button briey to select the source device

connected via Bluetooth®

Press and hold to turn on the Bluetooth® function

Press this button to select the source device

connceted to the RCA input jack

7. Press these buttons to increase or lower the audio

level coming from the soundbar

640mm

Drill pilot holes (Ø8mm) and insert the supplied anchors if installing the unit on

a concrete or brick wall.

4. Proceed to turn this base 180° to convert it into a wall bracket, as illustrated

below.

Insert the supplied washer and reattach the base on both ends of the bar.

Drive the supplied screws into the holes with a screwdriver, leaving 4mm of

space between the head and the wall surface.

Detach the base from the soundbar by rotating the plastic-head screw fixing

the metal plate to the soundbar.

640mm

Now insert the red and white RCA plugs into the matching input jacks on the

back of the soundbar. Then connect the other end of RCA cable into the

output jacks on your TV.

If an optional subwoofer is to be connected, insert a standard stereo cable

into the sub output jack on the back of the unit. In addition, you may insert

the 3.5mm cable into the auxliary input jack for wired playback from external

audio devices fitted with a stereo connection.

10.

Once all connections have been completed, carefully slide the soundbar over

the screws you just installed.

11.

Finally, plug the AC cord of the soundbar into a wall outlet and turn the main

switch on to power the device. The LED glows solid red.

12.

3.5MM AUX IN

RCA INPUT

AUX IN

OFF

POWER

RCA INPUT SUB OUT

Model No. KSB-200

AUX IN

OFF

POWER

RCA INPUT SUB OUT

Model No. KSB-200

R L RCA INPUT

3.5MM Output

AUX IN

First activate the remote control by removing the protective film from the

battery compartment.

Switch the soundbar on from the standby mode using the power button

found on the unit or the remote control. The LED glows white.

Note: Everytime the Soundbar is initially turned on, the RCA TV input is

selected automatically.

Should you have an external device connected to the auxiliary input jack, you

can select it by pressing the Aux button on the remote. The LED glows

orange in this mode.

Adjust the volume to a comfortable listening level using the buttons

on the soundbar or on the remote.

To mute the audio, press the button. This function is accesible only through

the remote control.

If after a period of 15 minutes no audio signals are detected from the RCA or

auxiliary inputs, the Soundbar will automatically enter into the standby mode. In

this case, simply press the power button to switch the unit back to its

active state.

Note: The soundbar is set to turn on automatically from standby as soon as

the TV is powered on.

If you do not intend to use the soundbar for a long time, set the main power

switch on the back to its OFF position to fully disconnect the device.

Bluetooth®technology enables the streaming of audio wirelessly from compatible

devices that comply with the A2DP standard.

Wired RCA and Auxiliary modes

V. Adavanced operation

First switch the soundbar on from the standby mode using the power button

found on the front of the unit or on the remote control, if you haven’t done so

already. The LED glows white.

Place both devices not more than one meter away from each other.

Enable the Bluetooth®function on your audio device and set it to discover the

wireless soundbar.

Cycle to the Bluetooth®feature on the soundbar by pressing the Source button

on the unit or the BT button on the remote control. The LED glows solid

blue.

Likewise, now press and hold the Source or the BT button until a short beep

is heard and the LED starts blinking fast. This indicates that the system has

entered into the pairing mode.

Once the speaker appears listed under the newly found Bluetooth®devices

(KSB-200), it will ask if you want to pair with it.

Accept by pressing Yes or Ok. If you have a lower Bluetooth®version, you may

be prompted to enter the passkey=0000 (4 zeros).

If pairing is successful, another short beep will be heard, making the LED blink

slowly before becoming solid blue.

If after 60 seconds the pairing process fails, please repeat steps 1 through 6

described above.

Wireless Bluetooth®mode

Pairing the soundbar with your Bluetooth®device

VI. Technical specications

The soundbar is able to memorize up to eight wireless devices. It will

automatically re-pair with last memorized device once it falls back within

communications range, the Bluetooth®function is re-enabled or when it is

turned on again after being powered off.

10.

Device

Speaker

Connectivity

Additional information

Type

Reference RMS

Sound enhancement technology

Standby mode

Connection type

Wireless frequency

Wireless range

Wireless, 3.5mm and RCA

2.4GHz-2.48GHz

33ft

Dimensions

Weight

Warranty

39x2.8x3.5 in

6.4lb

One year

2.0 channel soundbar

120W

3D surround eect

Yes (after 15 minutes of inactivity)

100/240V

60/50Hz, autosensing

Driver unit

Frequency

Impedance

Sensitivity

Sound pressure level (S.P.L.)

Signal to noise ratio

2.25 inches per channel

20Hz-20kHz

8Ω

≥ 45dB

95dB with less than 1% total harmonic distortion

≥ 70dB

AC input

Do NOT drop, hit or shake the device.

Do NOT disassemble, repair or modify the soundbar yourself.

There are no user serviceable parts inside the unit. Only qualified personnel

should be allowed to perform repairs on the unit without voiding the warranty.

Do NOT use cleaning products that contain benzene, solvents or alcohol.

Do NOT expose the soundbar to excessive heat or to direct sunlight for long

periods of time.

Do NOT place heavy objects on top of the soundbar.

Do NOT use near a microwave oven or wireless LAN products.

Do NOT place containers with liquid on top or near the soundbar.

The device must be placed on a flat and stable surface.

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

•

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

•

Precautions FCC statement

Español

I. Introducción:

Características

II. Contenido del empaque

Felicitaciones por la compra de su nueva Barra de Sonido KSB-200 de

Klip Xtreme®con tecnología inalámbrica.

Le invitamos a visitar nuestra página web en www.klipxtreme.com en caso de

solicitar asistencia o si desea conocer más acerca de este sistema de audio y

otros innovadores productos.

Para aprovechar al máximo todas las ventajas de su sistema de parlantes, haga el

favor de tomarse unos minutos para leer las instrucciones a continuación y

familiarizarse con el funcionamiento de la unidad. Antes de instalar el dispositivo,

verifique que hayan sido incluidos en el empaque los artículos mencionados en la

lista siguiente:

Retire cuidadosamente el contenido de la caja. Es recomendable que conserve la

caja y todo el empaque original, si pretende almacenar la unidad o en caso de

necesitar enviarla para recibir servicio técnico.

Sistema de sonido envolvente de 2.0 canales que combina un diseño único,

tecnología inalámbrica y una calidad acústica inigualable

120W de potencia de salida a través de dos microparlantes de 57mm cada uno

NPS de 95dB con un DAT inferior al 1%

Compatible con parlantes de ultragraves que tengan una conexión RCA

Impecable reproducción de sonido con y sin cables

Efectos de sonido envolvente 3D, con optimización digital del audio

La barra de sonido se cambia del modo de espera a activo automáticamente al

momento de encender el televisor

Panel de control frontal

Práctico control remoto

Conectores de entrada RCA y auxiliar

Diseño apto para sobremesa o para montaje en la pared

•

Barra de sonido

Cable estéreo con conector hembra de 3,5mm

a dos conectores macho RCA

Cable con conector RCA macho a RCA macho

Cable con conector 3,5mm a 3,5mm

Control remoto con batería

Kit de herrajes para montaje

Guía de instalación rápida

•

(1)

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Sistema de altavoces de Klip Xtreme

Klip Xtreme

Klip Xtreme Duet KFS-600 Manual de usuario

Klip Xtreme

Klip Xtreme UltraBoom Portable KLS-875 Manual de usuario

Klip Xtreme

Klip Xtreme BluPulse KWS-651 Manual de usuario

Klip Xtreme

Klip Xtreme Boom Bar Manual de usuario

Klip Xtreme

Klip Xtreme Charme 2 KLS-651 Manual de usuario

Klip Xtreme

Klip Xtreme UltraBoom Pro Manual de usuario

Klip Xtreme

Klip Xtreme Harmonium KSB-001 Manual de usuario

Klip Xtreme

Klip Xtreme Tempo Manual de usuario

Klip Xtreme

Klip Xtreme MystiK Manual de usuario

Klip Xtreme

Klip Xtreme BluBlade KSB-100 Manual de usuario

Klip Xtreme

Klip Xtreme Zynk KSB-260 Manual de usuario

Klip Xtreme

Klip Xtreme MagBlaster Pro Manual de usuario

Klip Xtreme

Klip Xtreme KSB-200 Manual de usuario

Klip Xtreme

Klip Xtreme ZounDtastik KLS-670 Manual de usuario

Klip Xtreme

Klip Xtreme Zaffire KSB-500 Manual de usuario

Klip Xtreme

Klip Xtreme Cinematik KWS-760 Manual de usuario

Klip Xtreme

Klip Xtreme Mirage Manual de usuario

Klip Xtreme

Klip Xtreme BluFusion KWS-710 Manual de usuario

Manuales populares de Sistema de altavoces de otras marcas

JVC

JVC CA-MXK5R Manual de usuario

LG NB4532B Manual de usuario

JVC

JVC CA-FSH100 Manual de usuario

5Core

5Core Pro Series Manual de usuario

EAW

EAW MQV1394e Manual de usuario

Lynx

Lynx GXR-LA10A Manual de usuario

iLive

iLive ITB066B Manual de usuario

RDX

RDX QuickStation 4 Manual de usuario

Electro-Voice

Electro-Voice S-122 Manual de usuario

Sven

Sven SPS-619 GOLD Manual de usuario

Pioneer

Pioneer CS-7070 Manual de usuario

EAW

EAW UB82e Manual de usuario

Sondpex

Sondpex Active Speaker System and Digital Music... Manual de usuario

JVC

JVC NX-PN7 Manual de usuario

Marshall Amplification

Marshall Amplification AR-DM61-BT Manual de usuario

Yamaha

Yamaha NX-A01 - Speaker Sys Manual de usuario

SE Audiotechnik

SE Audiotechnik I-LINE Manual de usuario

Gemini

Gemini WRX-843 Series Manual de usuario