Kiwi TLG8402V1 Manual de usuario
1
Kiwi Temperature Box
Quick Start Guide
Ver.2.1
LoRa Temperature Sensors & Gateway Package
Kiwi IOT Solution Ready
Cold Rooms | Chillers | Dry Storage | Warehouse | Refrigerated Transport | Pharmaceutical
2
INDEX
1) Introduction……..………….……….………………………………………………….…………………………………3
2) Packing List……………………………………………………………………………………………………….…………3
3) System Requirements………….………………………………………………………..………………………….…4
4) Network Topology Requirements ………………………………………………………………………….……4
5) Hardware Introduction ……………………………………….………………………………………………………4
6) Guideline before Your Installation ……………………….………………………………………………………4
7) Hardware Installation (by Ethernet) …………………….………………………………………………………5
8) Hardware Installation (by LTE network) ………………….……………………………………………………8
9) Sensor Position Suggestion…..……….……………………….……………….…………………………………10
10) Troubleshooting / Q&A …………….…………………………………….….………………………….…………11
11) Contacts for support ……………………………………….…………….….….…………………………….…… 12
12) Warranty Period and Scope……………….………………………………………………………………………13
3
Quick-Start-Guide (QSG) for KiwiBox Cloud services
Thank you for purchasing the KiwiBox- Temperature gateway / sensors package, this Quick Start Guide will show you
the basics of installing the KiwiBox devices at your application environment.
1) Packing List:
◼TLG8402V1 Gateway x 1 (or optional TLG3901V2 x 1)
◼USB Cable x 1
◼LoRa Antenna * 1
◼Power adaptor 100 ~ 240 Vac, 5 Volts / 2.5 Amps x 1
◼603 temperature sensor (with 2 screws) x 10 (default package, quantity 10~20 by option)
◼604V2 temperature sensor (optional item)
8402V1 Gateway
USB charging cable * 1
LoRa Antenna * 1
Power adaptor
[optional] 603 temperature sensor
(with 2 screws)
[optional]604V2 temperature
sensor
[optional accessory] LAS-603 fixed
iron plates
4
2) System Requirements
◼Microsoft Windows 10, Mac OS X, or Linux or smartphone
◼Web Browser: Google Chrome
◼Smartphone: iOS: 10.0 or later; Android OS: 4.3
3) Network Topology Requirements
◼Network cable which can link to internet. (DHCP-enabled
network)
◼SMART-Phone can access to 3G/4G network. (Optional)
◼If Gateway equipped “LTE module”, you also can install
gateway through 3G/4G network connecting to
internet to finish gateway’s configuration.
4) Hardware Introduction
◼TLG8402V1 Gateway - TLG8402V1 is an 1CH LoRa gateway that adopt LoRaWAN® network
solution for receiving data on specified frequency and SF. LoRaWAN® is a standard protocol , a
Low Power Wide Area Network (LPWAN), it uses ISM band and Internet of Things (IoT)
applications.
◼LAS-603 temperature sensor - LAS- 603 temperature sensor is designed for refrigerator
wireless temperature monitoring. We may use this device to track ambient changes in
temperature. With LoRaWAN wireless module, this temperature sensor status will be sent to
the network server via gateway.
◼LAS-604V2 temperature sensor - LAS-604V2 is a temperature sensor that utilizes LoRaWAN to
periodically report temperature. The temperature measurement is through PT100 probe.
5) Guideline before Your Installation
Before installing the KiwiBox, please make sure how your gateway access to network? We provide two
options to set-up your gateway:
A. Connect via Network cable (Ethernet cable to WAN) _ If you have network cable can link to
internet, please follows chapter -6 to install gateway & sensors step-by-step.
B. Connect via SIM card’s 3G/4G network (LTE mode)- If you have smartphone and SIM card can use
in Gateway to link to internet, please follows chapter -7 to install gateway & sensors step-by-step.
MyBox Network Diagram
5
6) Hardware Installation (by Ethernet)
Getting Start
Graphic illustration
Step-1,
Deploy
Gateway
1.1 Before starting to use gateway,
the power and Ethernet (RJ45 to
network) and antenna need to
be connected well.
1.2 USB cable connect to power
adapter and plug the adapter in
the wall outlet. (power light
should turn green)
1.1
1.2
Step-2
Deploy
603/
604V2
sensors
(optional) Turn on temperature
sensors – “LAS-603”.
2.1 Remove the bottom cover, and
turn on the power.
2.1
2.2 Cover back the bottom cover.
Lock two screws.
2.2
2.3 Methods to fix LAS-603.
1) By backside 3 magnets of
LAS-603 mounting on
magnetic surface.
2) By hook (remove 3 magnets)
3) Use accessory – fixed iron
plate for non-magnetic
surface.
2.2
(optional) Turn on temperature
sensors – “LAS-604V2”.
2.3 Open LAS-604V2’s cover, holding
and pressing two places in red circle.
2.3
6
2.4 Open the bottom cover.
2.4
2.5 Plug-in battery connector into
slot with correct direction.
(connector rib needs to align joint
groove)
* attention: DO NOT use metal tool to
contact the connector.
2.5
2.6 Cover back the bottom cover.
2.6
2.7 Methods to fix LAS-604V2
➢Use double-side tape or hook
to fix LAS-604V2 and its cable,
put the temperature probe
near the monitoring position.
2.7 Place the sensor at temperature-
monitoring position as you need or
refer to Kiwi’s suggestion on chapter-
9)Sensor position suggestion.
*Attention: Please DO NOT put LAS-
604V2 device inside the Refrigerator
& Freezer.
2.7
3.1 Open the google browser-
Chrome on computer and login to
KiwiBox Cloud Server-
https://myBox.kiwi-tec.com/.
➢Please input default username
& password= Kiwibox serial
number which showed on label
of KiwiBox packing box.
➢For example, if your KiwiBox
S/N is 92015DA00001, please
3.1
7
input 92015DA00001
/92015DA00001. (you can
change your password after
log-in server)
Step-3
Start to
monitor
3.2 Start to monitor.
➢Click “Temp. Management”,
then click “Temperature
Record”, you can enter the
monitor screen.
* The default setting: the temperature
data will be transmitted to cloud server
at a top of the hour, like 1:00 p.m.),
please wait to next top of the hour.
3.2
8
7) Hardware Installation (by LTE network)
Getting Start
Graphic illustration
Step-1,
Deploy
Gateway
& login
[Method-2] Setting by LTE module.
1.1 Insert nano-sim card to sim card
slot at back side of TLG8402
gateway.
1.2 the power and antenna need to
be connected well.
1.3 USB cable connect to power
adapter and plug the adapter in
the wall outlet. (power light
should turn green)
* attention: please follow the SIM card
direction icon to insert SIM card.
1.1
1.4 On your smartphone, turn-on the
WiFi to connect to Gateway WiFi
spot.
➢Search SSID with TLGxxxx
(model name) – prefix ; the
model name is also printed on
with back side label.
➢Link to the SSID and input
password.
◼If Gateway is TLG8402V1,
the default password is
"tlg8402ap".
◼If Gateway is TLG3901V2,
the default password is
"tlg3901b".
1.2
1.5 On your smartphone, to open the
google browser- Chrome, then login
to Kiwi KiwiBox setting website:
http://10.42.43.1/ (in computer
display mode).
➢Input default login
name/password
(admin/admin)
➢Select “System”, then enter
“Cellular Network” setting
screen.
1.5
9
1.6 Setup Cellular Network
➢Input APN, Dial Number,
Username and Password
according to operator’s
setting.
➢If SIM is protected by PIN,
also input PIN Code.
1.6
Step-2
Deploy
603/
604V2
sensors
8) Same with step-2 of chapter-
6)Hardware Installation (by
Ethernet) to deploy sensors.
2.1
Step-3
Start to
monitor
Same with step-3 of chapter-
6)Hardware Installation (by
Ethernet).
3.1 Open the google browser-
Chrome on computer and login to
Kiwi KiwiBox Cloud Server-
https://KiwiBox.kiwi-tec.com/.
➢Please input default username
& password= KiwiBox S/N
which showed on label of
KiwiBox packing box.
➢For example, if your KiwiBox
S/N is 92015DA00001, please
input 92015DA00001
/92015DA00001.
3
10
8) Sensor position suggestion
Getting Start
Graphic illustration
A). Refrigerator / Open multideck chiller
◼Suggested installation positions:
1. Air outlet / vents
2. The center of Refrigerator
3. Fix sensor-604V2’s temperature probe
on the monitoring position. Mounting
sensor body on the wall next to the door
of Refrigerator.
◼Mount options:
1. Use hook fixation or paste 3M double-
side type on the rear-side of LAS-604
series sensor.
2. Through the Magnets of LAS-603 to fix.
◼Example: To put sensor on best position
near air outlet. (Not inlet)
A.1
A.2
B). Freezer
-Suggested installation positions:
1. Air outlet / vents
B.1
C). Pharmaceutical shelves
-Suggested installation position:
1. The center of shelves
C.1
Tabla de contenidos
Otros manuales de Controladores de temperatura de Kiwi
