Kirby Morgan EXO-26 Manual de usuario

EXO-26

Balanced Regulator

Full Face Mask

User Guide

Part #: 100-131

Kirby Morgan Dive Systems, Inc.

1430 Jason Way

Santa Maria, CA 93455, USA

Telephone (805) 928-7772

FAX (805) 928-0342

E-Mail: [email protected]

Web Site: www.KirbyMorgan.com

made available for the express use of owner of this Kirby Morgan® product. No

part of this manual may be reproduced, stored in any retrieval system, or transmit-

ted, or used in any form or by any means, whether graphic, electronic, mechani-

cal, photocopy, or otherwise by technology known or unknown, without the prior

written permission of Kirby Morgan Dive Systems, Inc.

EXO® is a Registered Trademark of Kirby Morgan

Document # 120613002

Warranty Information

Kirby Morgan Dive Systems, Inc. warrants every new mask,

helmet, or KMAC Air Control System to be free from defects

in workmanship for a period of three hundred sixty ve (365)

days from date of purchase. This warranty covers all metal,

berglass, and plastic parts. This warranty does NOT cover

rubber parts, communications components, or head cushions. In

addition, due to the electrolytic nature of underwater cutting and

welding, chrome plating cannot be warranted when the diver

engages in these activities.

Should any part become defective, contact the nearest autho-

rized KMDSI dealer. If there is no dealer in your area, contact

KMDSI directly at (805) 928-7772. You must have a return

authorization from KMDSI prior to the return of any item, Upon

approval from KMDSI, return the defective part, freight prepaid,

to the KMDSI plant. The part will be repaired or replaced at no

charge as deemed necessary by KMDSI.

This warranty becomes null and void if:

1) The product is not registered with KMDSI within ten (10)

days of purchase.

2) The product has not been properly serviced and/or main-

tained according to the appropriate KMDSI manual.

In addition, the user is responsible to ensure that all

product updates as recommended by KMDSI have been

performed.

3) Unauthorized modications have been made to the prod-

uct.

4) The product has been abused or subjected to conditions

which are unusual or exceed the product’s intended service.

NOTE: Be sure to complete the enclosed warranty card and

return it to KMDSI immediately. No warranty claims will be

honored without a satisfactorily completed warranty card on le

at KMDSI.

Denition of Signal Words Used in this Manual

For your protection, pay particular attention to items identied by

signal words in this manual. These terms are identied as, CAU-

TION, WARNING and DANGER. It is especially important for you

to read and understand these sections.

BDANGER

This word indicates an imminently hazardous situation, which

if not avoided, could result in death or serious injury.

BWARNING

This word indicates a potentially hazardous situation, which,

if not avoided, could result in death or serious injury.

BCAUTION

This word indicates a potentially hazardous situation, which

if not avoided, may result in minor or moderate injury. It may

also be used to alert against unsafe practices.

NOTICE

This word is used to address practices not related

to personal injury.

Table Of Contents

Warranty Information .......................................... 2

Denition of Signal Words Used in this Manual .............. 3

Chapter 1 EXO-26 Balanced Regulator Full Face Mask ..... 10

1.1 Introduction ............................................... 10

1.2 Design Purpose ........................................... 12

1.3 Specications ............................................. 13

Chapter 2 Operating Instructions ............................ 14

2.1 Receiving The Mask ...................................... 14

2.2 Before You Dive! .......................................... 14

2.3 Visual Inspection .......................................... 14

2.4 Clean The Face Port ...................................... 15

2.5 Adjusting The Equalizer .................................. 15

2.6 Checking Regulator Functions And Preparing The Mask

For Use ....................................................... 15

2.7 First Stage Regulator ..................................... 17

2.8 Overpressure Relief Valve ................................ 17

2.9 Recommendations For Donning Or Removing The Exo-26

................................................................. 18

2.10 Donning The Mask ....................................... 18

2.11 Removing The Mask ..................................... 19

2.12 Proper Hood Fit .......................................... 19

Chapter 3 In Water Operations ............................... 21

3.1 Introduction ............................................... 21

3.2 Water Entry ................................................ 21

3.3 Regulator Adjustment ..................................... 21

3.4 Spider Adjustment ........................................ 21

3.5 Purging Water From The Mask ........................... 22

Chapter 4 Post Dive Procedures ............................. 23

4.1 Post Dive Rinse ........................................... 23

4.2 Reassembly Of The Mask ................................. 23

4.3 Periodical Maintenance Of The Mask .................... 24

Chapter 5 Communications .................................. 25

BWARNING

Follow all the instructions in this manual carefully and heed

all safety precautions. Improper use of this diving mask could

result in serious injury or death.

BWARNING

Diving is a life threatening occupation. Even if you do ev-

erything right you can still be killed or injured. None of the

models of Kirby Morgan helmets or masks can prevent acci-

dents, injuries or death due to improper training, poor-health,

improper supervision, improper job requirements, improper

maintenance or acts of God.

If you have any questions concerning this manual, contact KMDSI (805) 928-

7772 or by Email at info@KMDSI.com or Dive Lab Inc. (850) 235-2715 or at

[email protected]

BCAUTION

Kirby Morgan Dive Systems, Inc. declines all responsibility for

accidents due to an incomplete understanding of the equip-

ment.

BCAUTION

This mask should be used only with breathing air meeting

requirements of EN132 standard, Appendix A.

NOTICE

This mask should be used only with equipment and accesso-

ries which are approved according to EN250.

BCAUTION

This mask should be used only with equipment using open

circuit compressed air. The use of an oxygen enriched atmo-

sphere is dangerous and not allowed

NOTICE

In accordance with the EN250 standard, the maximum ap-

proved depth for the use of the equipment is 50 meters (164

feet).

BCAUTION

Never use a solvent to clean the mask. Never use aerosol

sprays on or around the mask as certain solvents and propul-

sion agents attack and damage rubber and certain plastics.

BCAUTION

In order to use this mask it is ABSOLUTELY NECESSARY that

you follow a training course and RECEIVE CERTIFICATION,

issued by a competent training organization, confirming your

ability to dive. Use of a mask by untrained and unqualified per-

sonnel is DANGEROUS and could lead to serious accidents,

and/or death. Use of this equipment by a person who does not

possess certification issued by an appropriate organization

renders void any guarantee, express or implied, on this prod-

uct. This mask, as supplied, is intended to be used for Scuba

diving.

Before each use the mask should be carefully checked and

submitted to the operational tests. NEVER DIVE with a mask

showing any signs of deterioration or which has a below nor-

mal performance.

NOTICE

The hoses tted to the EXO-26 Full Face Mask, and supplied by KMDSI,

meet the requirements of the EN250 standard concerning the connection

of components. Only origional Kirby Morgan hoses should be used as

replacements.

- HP thread 7/1 6" - 20 UNF

- MP thread 3/8" - 24 UNF

Always allow pressure to build up slowly in the regulator by turning on the cylinder

valve SLOWLY.

Use only silicone grease on the rubber components. Never grease the parts of your

mask with a lubricant containing hydrocarbons, household oil, or motor oil.

Before diving in cold water (water temperature below 10°C / 50°F), you should rst

obtain specialized training and certication in the appropriate techniques from a

competent organization. You should also use equipment intended for this purpose.

The use of a CE approved rst stage regulator with a silicone oil chamber will

reduce the possibility of rst stage icing causing failure. Also, the diver should

have been trained and have mastered the techniques of cold water diving so as to

be able to take all precautions necessary to avoid freezing of the regulator. All of

this is included in the training programs of organizations offering courses in diving

in cold water or under ice.

In order to reduce the risks of regulator freezing when diving in cold water (below

10°C), consider doing the following:

1 - Protect your regulators from any accidental ingress of water into the rst or

second stages.

2 -Protect your equipment from cold before the dive. More precisely, keep your

mask and all its accessories in a warm dry place.

3 - Carry out all pre-dive checks of your equipment in a warm dry place if neces-

sary, before even going to the dive site.

4 - Avoid breathing through the regulator or pressing the purge button in very cold

air before entering the water.

5 - As far as is possible, avoid excessive effort during the dive.

6 - Check that the air used to ll your cylinder is dry. The water vapor contained

in this air should have a condensation point below -54oC. Excess water vapor can

freeze, causing a free ow, or can block the air ow completely.

The EXO-26 Balanced Regulator Full Face Mask described in this guide was

inspected and certied by a notied testing institution in compliance with EC direc-

tive 89/686 of 21 December 1989. Testing procedures were in accordance with the

same directive that sets forth the marketing conditions and key safety requirements

for Personal Protection Equipment (PPE Category III) regarding product quality

assurance and according to the European Standard EN 250.

REFERENCES TO EN 250 - OBJECT- DEFINITIONS - LIMITS

Object: The requirements and tests provided for in EN 250 are aimed at provid-

ing a minimum safety level for the operation of diving breathing apparatuses at a

maximum depth of 50 m / 164 feet.

Scuba - Denition (EN 1 32): Self-contained, open-circuit compressed air underwa-

ter breathing apparatus is an apparatus which has a portable supply of compressed

air carried by the diver, allowing him to breathe underwater.

Scuba- Minimum equipment (EN 250):

a) Air cylinder/ cylinders

b) Demand regulator

c) Safety device, e.g. pressure gauge / computer or reserve or alarm.

d) Carrying frame or holding device for air cylinder(s) to mount

the harness or carrying system, e.g. backpack and/or straps.

e) Face piece: mouth piece assembly or full face mask or

diving helmet.

f) Operating instructions.

SCUBA - Component Units (EN 250): The EXO-26 BALANCED REGULATOR

FULL FACE MASK described in this guide is to be used only with the KMDSI

rst stage regulator certied together with this mask according to EN250. It may

be combined with other SCUBA components such as cylinders and pressure gauges

certied in compliance with EC directive 89/686 and EN 250. The air contained

in the cylinders must comply with the requirements for breathable air set forth in

EN 1 32 - Appendix A.

DEFINITIONS (EN 250)

COLD WATER DIVING - water temperature below +1 0°C (50°F).

WARM WATER DIVING - water temperature over +1 0°C (50°F).

MAXIMUM DEPTH: 50 m / 164 feet.

STORAGE TEMPERATURES: +70oC / -30oC (max/min)

Chapter 1

EXO-26 Balanced Regulator Full Face Mask

1.1 Introduction

KMDSI has been designing and manufacturing SCUBA, commercial, scientic,

search & rescue, and military diving equipment for over fourty years. Many of

our products have become the standard of the industry due to their design, high

quality, and outstanding performance. The Balanced Regulator EXO-26 are part

of this continuing tradition.

NOTICE

This user guide gives the user basic daily operational information for the

EXO-26 Balanced Regulator Full Face Mask. For detailed maintenance and

use information, please refer to the EXO-26 Operations and Maintenance

Manual, KMDSI part # 100-030.

The following is a list of features to be found on the Balanced Regulator EXO-26:

1) Fully Adjustable Regulator:

The regulator is fully adjustable over a wide range of operating pressures. By

simply turning the Adjustment Knob while diving, you can “tune” your regulator

for your type of diving.

2) EXOthermic™ Exhaust System:

The regulator assembly in the Balanced Regulator EXO-26 isolates the intake and

exhaust chambers from one another. The diver’s own breath assists in reducing

thermal drain by warming certain areas of the regulator. This helps to eliminate

freeze ups in cold water diving.

3) Earphone Pockets:

The earphones are allowed to equalize because all interior parts of the mask share

a common cavity. There is never a need to adjust their position and they are easily

accessible.

4) EXOskeleton:

The outer frame, or EXOskeleton, serves several functions. It protects the face

seal and is used to mount external components, such as the regulator, lens, and

communications.

5) Suspension Face Seal:

The suspension area of the face seal is attached to the EXOskeleton by ve mount-

ing legs, much like a trampoline. In this way, the seal allows the face to seal on a

Otros manuales para EXO-26

Tabla de contenidos

Otros manuales de Instrumento de buceo de Kirby Morgan

Kirby Morgan

Kirby Morgan 415-107 Manual de usuario

Kirby Morgan

Kirby Morgan MOD-1 Manual de usuario

Kirby Morgan

Kirby Morgan KM 97 Manual de usuario

Kirby Morgan

Kirby Morgan 510-674 Manual de usuario

Kirby Morgan

Kirby Morgan 525-100 Manual de usuario

Kirby Morgan

Kirby Morgan KMB 18 Instrucciones de funcionamiento

Kirby Morgan

Kirby Morgan M-48 SuperMask Manual de usuario

Kirby Morgan

Kirby Morgan SuperFlow 525-757 Manual de usuario

Kirby Morgan

Kirby Morgan KM 37 Manual de usuario

Kirby Morgan

Kirby Morgan 100-075 Manual de usuario

Kirby Morgan

Kirby Morgan 37 & 57 Manual de usuario

Kirby Morgan

Kirby Morgan M-48 MOD-1 Manual de usuario

Kirby Morgan

Kirby Morgan 525-757 Manual de usuario

Kirby Morgan

Kirby Morgan One Way Valve Manual de usuario

Kirby Morgan

Kirby Morgan 525-769 Manual de usuario

Kirby Morgan

Kirby Morgan SuperMask MOD-1 Manual de usuario

Kirby Morgan

Kirby Morgan EXO Full-Face Mask Manual

Kirby Morgan

Kirby Morgan SuperLite 17C Helmet Manual de usuario

Kirby Morgan

Kirby Morgan KMB-18 A/B Manual de usuario

Kirby Morgan

Kirby Morgan 37 Manual de usuario

Kirby Morgan

Kirby Morgan 17A/B Documento técnico

Kirby Morgan

Kirby Morgan SuperLite 27 Manual de usuario

Kirby Morgan

Kirby Morgan M-48 SuperMask Manual de usuario

Kirby Morgan

Kirby Morgan 525-115 Manual de usuario

Manuales populares de Instrumento de buceo de otras marcas

Sherwood

Sherwood Amphos Manual de usuario

Zeagle

Zeagle N2ition Manual de usuario

Tusa

Tusa Q 1203 CE Guía

Sherwood Scuba

Sherwood Scuba Insight Instrucciones de montaje

SUBMERSIBLE SYSTEMS

SUBMERSIBLE SYSTEMS Spare Air 600 Manual de usuario

OCEANS

OCEANS S1 Supersonic Manual de usuario

heinrichs weikamp

heinrichs weikamp OSTC 2 Manual de usuario

Omer

Omer SP2 Manual de usuario

Scott

Scott PRO-PAK Manual de usuario

Apeks

Apeks BLACK SAPPHIRE Manual de usuario

Waterproof

Waterproof DRYSUIT Manual de usuario

Dräger

Dräger PAS AirPack 1 Manual de usuario

Dive Lab

Dive Lab KIRBY MORGAN KMB 18 Manual de usuario

Ratio Computers

Ratio Computers iDive Manual de usuario

Oceanic

Oceanic PROPLUS X Manual de usuario

CFA

CFA MSA G1 Manual de usuario

Genesis

Genesis Centauri Manual de usuario

TREND

TREND GAUGE/60 Manual de usuario