Kingwo MT02S+ Manual de usuario
March,2020
User Manual(MT02S+)
GPS Talks
Declaration
The contents of this manual might be updated from time to time
without prior notice; the updated content will be added to the new
version of this manual. Langocloud reserve the rights to update the
products or procedures described in the manual at any time. If there is a
description of the product in the manual that does not match the actual
product, the actual product shall prevail. Langocloud owns the final
interpretation rights of this manual.
GPS Talks
Contents
Chapter 1: Photo ................................................................... 1
Chapter 2: Product Feature ........................................................... 2
Chapter 3: Technical Specification ..................................................... 3
3.1 Main Unit ................................................................. 3
Chapter 4: Functions ................................................................ 4
4.1 【Basic function-Tracking function】 .......................................... 4
4.1.1Timely tracking, speed upload and distance upload(Default is timely upload) ...... 4
4.1.2 Blind area data storage (Default ON) ................................... 4
4.1.3 Cornering Compensation (Default ON) .................................... 5
4.1.4 LBS (Default OFF) ..................................................... 5
4.1.5 AGPS (Default ON) .................................................... 5
4.2 【Basic function-Alarm function】............................................ 5
4.2.1 Low Voltage Alarm (Default ON) ......................................... 5
4.2.2 Over speed alarm (Default OFF) ......................................... 5
4.2.3 Driving behavior alarm (Default OFF) ..................................... 6
4.2.5 Turn over alarm(Default OFF) ........................................... 6
4.2.6 Vibration alarm (Default OFF) ........................................... 6
4.2.7 Towing alarm (Default OFF) ............................................ 6
4.2.8 Wire cut off alarm (Default ON,can not be disabled) ......................... 6
4.2.9 Air condition status detect and SOS (Default ON) ............................ 7
4.2.10 GPS error alarm (Default ON) .......................................... 7
4.3 【Basic function-Intelligent function】 ........................................ 7
4.3.1 Power Save (Default 5 mins after static status) ............................. 7
4.3.2 Self-Diagnosis (Default ON) ............................................. 7
4.3.3 Static Drift Suppression (Default ON) ..................................... 8
4.3.4 Mileage Calculation (Default ON) ........................................ 8
4.3.5 Remote Configuration (Default ON) ...................................... 8
4.3.6 Remote Upgrade (OTA) (Default ON) ..................................... 8
4.3.7 Dual IP or Domain (Default ON) ......................................... 8
4.3.8 GT220 protocol (Default ON) ............................................ 9
Chapter 5: Installation guide ......................................................... 10
5.1 Installation Diagram ..................................................... 10
5.2 Installation and debugging process ......................................... 11
5.2.1 SIM installation ..................................................... 11
5.2.2 Main unit power on .................................................. 11
5.2.3 Parameter setting by SMS .................................................. 11
5.2.4Recommended Installation place ........................................ 16
5.2.5 Software ............................................................... 16
GPS Talks
1
Chapter 1: Photo
GPS Talks
2
Chapter 2: Product Feature
1、 Support GPS/Beidou, AGPS, LBS,with accurate position performance；
2、 Built in high sensitive G-sensor accelerometer
3、 Driving behavior monitor
4、 Supports intelligent self-diagnosis, intelligent power save mode, remote fuel and
power cut off, AC detection or SOS,OTA and alarm functions
5、 Small in size and wide voltage, especially designed for scooter, motorcycle,
electric vehicles and automotive financial risk control project
6、 Small and convenient for conceal installation
7、 Support Kingwo,GT220 protocol and JT808 protocol
GPS Talks
3
Chapter 3: Technical Specification
3.1 Main Unit
Physical
Dimension 82mm*23mm*13mm
Weight 28g
Cellular
GSM module Fibocom G500GL
Frequency
Working Frequency: 850/900/1800/1900MHz
Network protocol: Embedded TCP/IP stack
Sensitivity: -107dBm@850/900MHz
-106dBm@1800/1900MHz
Output power: Class 4 (2W)@850/900MHz
Class 1 (1W)@1800/1900MHz
GPRS data: GPRS Class 10, Mobile Station Class B
GPS
Channels: 50
Sensitivity: -147dBm
Position accuracy:5-10m
Accuracy: 5m CEP
Cold start: <27s
Hot start: <1s
Power
Input voltage 9-100V
Battery NI-MH AAA 3.6V/90mA, 2 hours working time
based on 2-3 minutes upload
Power
consumption
Average Current: <30mA (DC 12V)
Maximum current: <10mA (DC 12V)
Interface
Digital input(2) Ignition detect and Air condition status detect
Digital output(1) Relay
GSM antenna Internal High Gain
GPS antenna Internal High Gain
SIM Microsim
Indicator 2 status LEDs, Green: GPS, Red: GSM
Memory 1300 pcs
Environmental
Parameter
Working
Temperature -20℃ ~ +70℃
GPS Talks
4
Humidity 5% ~ 95% (no fog)
Ingress Protection
Rating IP65
Chapter 4: Functions
4.1 【Basic function-Tracking function】
Including timely upload, blind zone compensation, speed mileage statistics, area
monitoring and other functions, the backend sends positioning commands, and the
device uploads data including longitude, latitude, speed, direction, and status
information.
4.1.1Timely tracking, speed upload and distance
upload(Default is timely upload)
The device can be set to upload the position and vehicle status information to the
backend at a certain time or a certain period or at a certain time interval.
The device can be configured to send packet at a certain distance
The device can be also configured to send packets when it detects a certain speed
change.
4.1.2 Blind area data storage (Default ON)
When the vehicles enters the GPRS blind area, the device will store the GPS data
upon 15s interval, the track data will be saved at the shortest 15S interval, those
data will be uploaded to the backend server once GPRS network recovered,
minimum 1000 pcs of data can be stored.
GPS Talks
5
4.1.3 Cornering Compensation (Default ON)
If the device detects that the vehicle driving direction has certain angular
deviation(default 15 degrees), the device will upload a packet extra to make sure the
driving trace is more accurate.
4.1.4 LBS (Default OFF)
If GPS is not available, the device will automatically switch to LBS mode, and acquire
the LBS each 30s and upload the based information, the server shall interprets the
specific location on the map, please to use this function, it would require your server
software support LBS function.
4.1.5 AGPS (Default ON)
The device supports AGPS, once the device is connected to GPRS, the AGPS can be
used to speed up the positioning and improve accuracy,
Important notice: if your SIM card has IP access limitation, we strongly suggest
you to whitelist the below IP for AGPS access: 119.23.233.52
4.2 【Basic function-Alarm function】
4.2.1 Low Voltage Alarm (Default ON)
When the battery voltage on the vehicle is too low (0-11V or 19-22V), device will
report a low voltage alarm to the backend
4.2.2 Over speed alarm (Default OFF)
When the vehicle speed is higher than the preset alarm value, the device will notify
the backend. Similarly, when the vehicle speed is lower than preset alarm value, a
low speed alarm will be uploaded to the backend, this value is configurable.
GPS Talks
6
4.2.3 Driving behavior alarm (Default OFF)
The device is built in with G-sensor, which can detect collision, hard deceleration,
hard acceleration and sharp turn alarm
4.2.5 Turn over alarm(Default OFF)
If someone turn over the device, it will report an alarm.
4.2.6 Vibration alarm (Default OFF)
The device supports vibration alarm, 10 minutes after the ignition off (Arm range
1-20 minutes), the device generates vibration (Delay range 1-10 mins) without ACC
connected, the device will upload vibration alarm.
4.2.7 Towing alarm (Default OFF)
An alarm is generated when the device is set to a displacement of more than 100
meters (message mode prompt), and the alarm information is reported when the
displacement radius exceeds 100 meters when the device is turned off. (Note:
displacement range 100~2000m).
The device will send SMS if the vehicle is moved in ignition off status, if the radius is
more than 100 meters, will upload towing alarm (Towing range:100-2000m).
4.2.8 Wire cut off alarm (Default ON,can not be disabled)
The device is allowed to connect a power off relay for power and fuel cut off
function in case a car stolen happens, a command can be sent to the device to
remote cut off the fuel and power , please note only the preconfigured center
number can send such command .
GPS Talks
7
4.2.9 Air condition status detect and SOS (Default ON)
This device has an extra wire for detecting the air condition status (On/Off) in the
cars or connecting a SOS for emergency alarm, when connect SOS, please make sure
1 wire is connected to the white wire of the device, and another wire is connected to
the red power wire of the device .
4.2.10 GPS error alarm (Default ON)
When the device detects that the GPS/BD module is working abnormally, it reports
the GPS receiver failure alarm to the backend.
4.3 【Basic function-Intelligent function】
4.3.1 Power Save (Default 5 mins after static status)
The device has a built-in high-sensitivity G-sensor accelerometer that monitors the
vehicle for motion in real time. When no motion is detected for a long time, the
device automatically enters the power saving state, meanwhile turns off the GPS/BD
module, and GSM enters the heartbeat return mode. In this state, the power
consumption of the device is extremely low, which can save power consumption
from the vehicle battery.
4.3.2 Self-Diagnosis (Default ON)
The device can perform self-diagnosis. In case there is malfunction regarding GPS
and GSM, it will report error message to the backend, and the backend .The backend
can query the current model, version, configuration, running status, and device
functions.
GPS Talks
Tabla de contenidos
Otros manuales de GPS de Kingwo
Kingwo
Kingwo NT09E Manual de usuario
Kingwo
Kingwo MT36 Manual de usuario
Kingwo
Kingwo MT02S Manual de usuario
Kingwo
Kingwo MT200 Manual de usuario
Kingwo
Kingwo NT08E Manual de usuario
Kingwo
Kingwo MT02S Manual de usuario
Kingwo
Kingwo MT35 Manual de usuario
Kingwo
Kingwo NT07E Manual de usuario
Kingwo
Kingwo LT01 Manual de usuario
Kingwo
Kingwo LT12 Manual de usuario
