Kingfisher NMBC1000 Manual de usuario
Original Instructions_MNL_NMBC1000_GB_V2_211020
Brush Cutter
1000W 23cm/38cm
NMBC1000
BX220IM
CAUTION: Read the instructions before using the product.
No name_MNL_NMBC1000_1000W 2-in-1 Brush cutter_GB_V2_211020.indd 1 10/20/21 12:02 PM
EN
02
42
43
45
41
35
30
27
In more detail...
Product functions
Operation
Care and maintenance
Troubleshooting
Recycling and disposal
Technical specications
Guarantee
EC declaration of conformity
27
02
03
19
20
Getting started...
Safety information
Your product
Before you start
These instructions are for your safety. Please read through them
thoroughly before use and retain them for future reference.
Let’s
get started...
47
No name_MNL_NMBC1000_1000W 2-in-1 Brush cutter_GB_V2_211020.indd 2 10/20/21 12:02 PM
EN
NMBC1000
Getting started...
03
Safety information
Safety warnings
General safety warnings
1. Never allow children, persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge or people unfamiliar with these instructions
to use the machine, local regulations may restrict the
age of the operator.
2. Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children.
General power tool safety warnings
WARNING! Read all safety warnings,
instructions, illustrations and specications
provided with this power tool. Failure to follow
all instructions listed below may result in electric
shock, re and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
No name_MNL_NMBC1000_1000W 2-in-1 Brush cutter_GB_V2_211020.indd 3 10/20/21 12:02 PM
EN
04
NMBC1000
Getting started...
Safety information
Safety warnings
Electrical safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodied plugs and matching outlets will reduce risk
of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
6. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
No name_MNL_NMBC1000_1000W 2-in-1 Brush cutter_GB_V2_211020.indd 4 10/20/21 12:02 PM
EN
NMBC1000
Getting started...
05
Safety information
Personal safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the inuence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
2. Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
3. Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source, picking up or carrying the tool. Carrying
power tools with your nger on the switch or energising
power tools that have the switch on invites accidents.
4. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result
in personal injury.
5. Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
6. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away from
moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
7. If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of dust
collection can reduce dust-related hazards.
No name_MNL_NMBC1000_1000W 2-in-1 Brush cutter_GB_V2_211020.indd 5 10/20/21 12:02 PM
EN
06
NMBC1000
Getting started...
Safety information
Safety warnings
8. Do not let familiarity gained from frequent use of
tools allow you to become complacent and ignore
tool safety principles. A careless action can cause
severe injury within a fraction of a second.
Power tool use and care
1. Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
2. Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
3. Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
4. Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
5. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool’s operation. If damaged, have the power tool
repaired before use. Many accidents are caused by
poorly maintained power tools.
6. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
No name_MNL_NMBC1000_1000W 2-in-1 Brush cutter_GB_V2_211020.indd 6 10/20/21 12:02 PM
EN
NMBC1000
Getting started...
07
Safety information
7. Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
8. Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
Service
1. Have your power tools serviced by a qualied
repair person using only identical replacement
parts. This will ensure that safety of the power tool is
maintained.
Electrically powered grass trimmer safety
warnings
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
Training
1. Read the instructions carefully. Be familiar with the
controls and the correct use of the machine.
2. Never allow children or people unfamiliar with these
instructions to use the machine. Local regulations can
restrict the age of the operator.
3. Keep in mind that the operator or user is responsible
for accidents or hazards occurring to other people or
their property.
Preparation
1. The machine should be supplied via a residual current
device (RCD) with a tripping current of not more than
30 mA.
No name_MNL_NMBC1000_1000W 2-in-1 Brush cutter_GB_V2_211020.indd 7 10/20/21 12:02 PM
EN
08
NMBC1000
Safety information
Getting started...
Safety warnings
2. Before use check the supply and extension cord
for signs of damage or aging. If the cord becomes
damaged during use, disconnect the cord from the
supply immediately. DO NOT TOUCH THE CORD
BEFORE DISCONNECTING THE SUPPLY. Do not
use the machine if the cord is damaged or worn.
3. Before use, always visually inspect the machine for
damaged, missing or misplaced guards or shields.
4. Never operate the machine while people, especially
children, or pets are nearby.
Operation
1. Keep supply and extension cords away from cutting
means.
2. Wear eye protection and stout shoes at all times while
operating the machine.
3. Avoid using the machine in bad weather conditions
especially when there is a risk of lightning.
4. Use the machine only in daylight or good articial light.
5. Never operate the machine with damaged guards or
shields or without guards or shields in place.
6. Switch on the motor only when the hands and feet are
away from the cutting means.
7. Always disconnect the machine from the power supply
(i.e. remove the plug from the mains, remove the
disabling device or removable battery)
1) whenever the machine is left unattended;
2) before clearing a blockage;
3) before checking, cleaning or working on the machine;
4) after striking a foreign object;
5) whenever the machine starts vibrating abnormally.
8. Take care against injury to feet and hands from the
cutting means.
No name_MNL_NMBC1000_1000W 2-in-1 Brush cutter_GB_V2_211020.indd 8 10/20/21 12:02 PM
EN
NMBC1000
Getting started...
09
Safety information
9. Always ensure that the ventilation openings are kept
clear of debris.
Maintenance and storage
1. Disconnect the machine from the power supply (i.e.
remove the plug from the mains, remove the disabling
device or removable battery) before carrying out
maintenance or cleaning work.
2. Use only the manufacturer’s recommended
replacement parts and accessories.
3. Inspect and maintain the machine regularly. Have the
machine repaired only by an authorized repairer.
4. When not in use, store the machine out of the reach
of children.
5. If the replacement of the supply cord is necessary, this
has to be done by the manufacturer or his agent in
order to avoid a safety hazard.
Additional safety warnings for grass trimmer and
brush cutter
1. Do not use the machine in bad weather conditions,
especially when there is a risk of lightning. This
decreases the risk of being struck by lightning.
2. Thoroughly inspect the area for wildlife where the
machine is to be used. Wildlife may be injured by the
machine during operation.
3. Thoroughly inspect the area where the machine is
to be used and remove all stones, sticks, wires,
bones, and other foreign objects. Thrown objects
can cause personal injury.
4. Before using the machine, always visually inspect
to see that the cutter or blade and the cutter or
blade assembly are not damaged. Damaged parts
increase the risk of injury.
No name_MNL_NMBC1000_1000W 2-in-1 Brush cutter_GB_V2_211020.indd 9 10/20/21 12:02 PM
EN NMBC1000
Getting started...
10
Safety information
Safety warnings
5. Before use, check the supply cord and any
extension cord for signs of damage or aging. Do
not use the machine if the cord is damaged or worn.
If the cord is damaged or worn during use, switch
off the machine and do not touch the cord before
disconnecting it from the supply. A damaged supply
cord or extension cord may result in electric shock, re
and/or serious injury.
6. Follow instructions for changing accessories.
Improperly tightened blade securing nuts or bolts
may either damage the blade or result in it becoming
detached.
7. The rated rotational speed of the blade must be
at least equal to the maximum rotational speed
marked on the machine. Blades running faster than
their rated rotational speed can break and y apart.
8. Wear eye, ear, head and hand protection. Adequate
protective equipment will reduce personal injury by
ying debris or accidental contact with the cutting line
or blade.
9. While operating the machine, always wear safety
footwear. Do not operate the machine when
barefoot or wearing open sandals. This reduces the
chance of injury to the feet from contact with a moving
cutter, line or blade.
10. While operating the machine, always wear long
trousers. Exposed skin increases the likelihood of
injury from thrown objects.
11. Keep bystanders away while operating the
machine. Thrown debris can result in serious personal
injury.
No name_MNL_NMBC1000_1000W 2-in-1 Brush cutter_GB_V2_211020.indd 10 10/20/21 12:02 PM
Tabla de contenidos
