King Pigeon S800 Manual de usuario
GSM MMS Camera
S800
User Manual
Ver 2.0 Date Issued: 2009-07-20
All rights reserved by King Pigeon Hi-Tech. Co., Ltd.
Website: Http://www.GSMalarmsystem.com
ATop Safety and Protection Solution In The Worldwide! www.GSMalarmsystem.com
King Pigeon Hi-Tech. Co., Ltd. Page １of 24 Ver 2.0 File No.: S8000020
Table of contents
1. Brief introduction ------------------------------------2
2. Safety Directions ------------------------------------2
3. Standard Packing list ------------------------------3
4. Physical Layout -------------------------------------3
5. Features ----------------------------------------------5
6. Settings -----------------------------------------------6
7. Operating Instructions ----------------------------13
8. Installation -------------------------------------------15
9. Add wireless sensors -----------------------------19
10. Technical specifications --------------------------21
11. Important information -----------------------------22
12. Maintenance-----------------------------------------22
13. Quality Warranty -----------------------------------22
ATop Safety and Protection Solution In The Worldwide! www.GSMalarmsystem.com
King Pigeon Hi-Tech. Co., Ltd. Page ２of 24 Ver 2.0 File No.: S8000020
1. Brief introduction
The GSM MMS Camera S800 is a new security protection solution
special for home, house and office and other applications. It based on
Wireless GSM Communication network, intergrated MMS and Computer
technology. When any sensor activated, it will Call&Send MMS &SMS to
owners telephone immediately.
Also, the user can set it by PC through USB cables with PC Programmer.
What you need is a SIMCard which supports MMS function.
2.Safety Directions
Safe Startup
Do not use GSM MMS Camera when using GSM equipment
is prohibited or might bring disturbance or danger.
Interference
All wireless equipment might interfere network signals of GSM
MMS Camera and influence its performance.
Avoid Use at Gas Station
Do not use GSM MMS Camera at a gas station. Power off
GSM MMS Camera it near fuels or chemicals.
Power it off near Blasting Places
Please follow relevant restrictive regulations. Avoid using the
device in blasting places.
Reasonable Use
Please install the product at suitable places as described in
the product documentation. Avoid signal screening by
ATop Safety and Protection Solution In The Worldwide! www.GSMalarmsystem.com
King Pigeon Hi-Tech. Co., Ltd. Page ３of 24 Ver 2.0 File No.: S8000020
covering the mainframe.
Use Qualified Maintenance Service
Maintenance can be carried out only by qualified maintainer.
Waterproofness
The product is not waterproof. Please install it at dry places
and keep it dry.
3. Standard Packing List
Control Unit X1 (Built in camera)
Wireless Magnetic Door Sensor X1
Wireless Remote Controls X 2
Wireless PIR Motion Sensor X1
Regulated 12VDC Power Supply X1
User manual and PC Programmer Tool CD X1
Optional Accessories: (Wireless Sensors only)
PIR Motion Sensor
Glass Break Sensor
Magnetic Window Sensor
Magnetic Steel Scrolling Door Sensor
And others.
4. Physical Layout
4.1 Control Unit physical layout
ATop Safety and Protection Solution In The Worldwide! www.GSMalarmsystem.com
King Pigeon Hi-Tech. Co., Ltd. Page ４of 24 Ver 2.0 File No.: S8000020
4.2 Indicator status
Codes Indicator Name Color Action Meaning
SVR Service indicator Red
On after
startup
On during startup and off
after startup.
On for
several
seconds
On during short message
sending
Constant on Constant during failure
ACT Action indicator Green
Flashing Flashing during detector
alarms
Fast flashing Fast flashing during defense
arrangement
Slow
flashing
Slow flashing during defense
removal
DEF
Defense
arrangement
/removal
indicator
Blue
Constant on On means in defense
Off Off means defense is
removed
BUZ Buzzer indicator Orange
Constant on On means onsite alarm
sounds are available
Off Off means alarm sounds are
unavailable
5. Features
ATop Safety and Protection Solution In The Worldwide! www.GSMalarmsystem.com
King Pigeon Hi-Tech. Co., Ltd. Page ５of 24 Ver 2.0 File No.: S8000020
5.1 The advantages of the GSM MMS Camera S800
1) Can send photos(MMS) to cellphones when it activated, and require
photos by user cellphone;
2) Supports Timer: e.g.: fixed time armed or fixed time disarmed, fixed
time capture picture then send to your mobile phones;
3) Supports programmed by PC through USB cable;
4) Alert SMS contents are editable by User;
5) Built in internal mircophone and speaker, you can speak to it or listen
what happening;
6) Internal GSM Anttena, small and portable;
7) Enable to rotate the camera on the Bracket.
5.2 Functions & Features of the GSM MMS Camera
1) Quad_band 850/900/1800/1900MHZ;
2) Can arm or disarm by SMS or remote control;
3) Automaticed send MMS (Photos) to pre-set cellphone when it
triggered;
4) Automaticed send SMS Alert to pre-set cellphone when it triggered;
5) Automaticed dial Pre-set alarm phone numbers when it triggered;
6) Supports 10 pcs wireless sensors, each sensor can be named by user;
7) Supports 5 alarm telephones and 4 SOS alarm numbers;
8) The image size and image quantity in MMS can be any one of 640X480,
320X240, 352X288, 176X144;
9) Supports wiretap through internal Mircophone;
10) Supports speak through internal speaker;
11) More Programmable to set its features, e.g.: delay time, edit the sensor
names, send SMS to users or not when power failure,etc;
12) Standby internal rechargeable battery which can last 12h;
ATop Safety and Protection Solution In The Worldwide! www.GSMalarmsystem.com
King Pigeon Hi-Tech. Co., Ltd. Page ６of 24 Ver 2.0 File No.: S8000020
13) Based on the GSM communication technology, apply to wide range
situations.
6. Settings
[The S800 can be setup by two way, the first one is by SMS, another is by
PC through USB cable. We suggest setup basic functions by SMS, setup
MMS parameters and other functions by PC through USB Cable.]
Notice:
User Authority Levels
MMS Alarm System users are of three types with different authorities.
Host: The host must input his or her mobile phone number into the MMS Alarm System
(refer to Elementary Use/Start using MMS Alarm System), otherwise the MMS Alarm
System cannot realize automatic alarm. Only one host number is permitted. The host
enjoys all the MMS Alarm System services and must remember the MMS Alarm System
password and mobile phone number.
Family: Family can monitor onsite sounds or acquire onsite images from the MMS Alarm
System. Family’s mobile phone numbers must be added through short message
commands sent from the host’s mobile phone. For operate the equipment, family must
remember SIM card password. Family with the MMS Alarm System password share the
configuration authority with the host.
Guest: To be a guest, only MMS Alarm System password and SIM card number is
required. A guest may send short message commands with the password using any
mobile phone to the MMS Alarm System to acquire onsite MMS images or help or inquire
the MMS Alarm System state.
User Type Quantity Configuration
Host 1 √
Family 4 ×
Guest Arbitrary
Email 3
ATop Safety and Protection Solution In The Worldwide! www.GSMalarmsystem.com
King Pigeon Hi-Tech. Co., Ltd. Page ７of 24 Ver 2.0 File No.: S8000020
Functions
Receive
SMS or
MMS on
alarms
Call the
S800 for
voice
monitoring
Request
images and
configuration
via SMS
Configure
general
parameter
s via SMS
Change
passwor
d
Add
or
delete
numb
ers
Host √√√√√√
Family ○√√●●●
Guest × ×
√need
password × × ×
○stands for functions with default “×” but can be enabled via commands.
●stands for functions enabled after password validation.
6.1 Setup the S800 by SMS Commands.
Tips!
1) Please insert one SIMCard into the S800 SIMCard Solt, this SIMCard must support
GPRS and MMS functions.
2) Power on the S800, the SIMCard will register the gsm network, if registered the gsm
network successful, the SVR led will be off. This process will take about 3~10S.
3) Please send SMS Text Message: 000000 (six zero) to the S800 SIMCard to set the
first alarm phone number, this number will be the host number. When the S800
received the command, will return a confirmation to you by SMS.
4) After you reset the system, please send 000000 to the S800 again.
5) After you setup the S800 by SMS, the S800 will return a confirmation to you by SMS.
SMS Commands For GSM MMS Camera
Setup Basic Functions
Com. Functions&Descriptions
88
Change the password, the default password is 000000 (Six Zero).
300 Set Family Alarm number, total is 4 Family Alarm numbers.
301 Remove Family Alarm numbers.
309 Inquire the Preset Host Alarm Number and Family Alarm Number.
ATop Safety and Protection Solution In The Worldwide! www.GSMalarmsystem.com
King Pigeon Hi-Tech. Co., Ltd. Page ８of 24 Ver 2.0 File No.: S8000020
302 Set Email address to receive the alarm informations(SMS,MMS).
303 Remove the Email address.
310 Inquire the preset email address list.
304 Set SOS alarm phone numbers.
305 Remove the SOS Alarm phone numbers.
311 Inquire the Preset SOS Alarm phone number list.
6041 Enable the Family Alarm numbers can receive the SMS Alert
Message and MMS(default is the family alarm number only
receive MMS, not SMS Alert message).
6040 Disable the Family Alarm numbers receive the SMS Alert
Message. But it still can receive the MMS Alert message.
502 Enable the Buzzer when the system triggered.(Deflaut)
503 Disable the Buzzer when the system triggered.
Examples:
1). Modify the password to 123456. you can send 88000000,123456 to the S800;
2). Set the 13570810254 as the family alarm number, you can send 30013570810254
to the S800;
3). Remove the 13570810254 from the family alarm number, you can send
30113570810254 to the S800.
4). Disable the buzzer when the S800 triggered, you can send 503 to the S800.
5) The format of other commands are similar to the above mentioned examples.
6.2 Setup the S800 by PC through USB Cable.
Tips: All the functions can setup by PC through USB Cable with our PC
Programmer Tool. Also, you can reset the S800 by click the Load default
button in the PC Programmer Tool.
6.21 Install the S800 PC Programmer Tool
1) Insert the CD which attached in the package;
2) Click the S800 MMS Camera Driver program to install it into your pc;
3) Connect the S800 to your PC through USB Cable, please don't insert
SIMCard and don’t switch on it;
4) Run the S800 PC Programmer Tool by double click it in the CD, the
ATop Safety and Protection Solution In The Worldwide! www.GSMalarmsystem.com
King Pigeon Hi-Tech. Co., Ltd. Page ９of 24 Ver 2.0 File No.: S8000020
software will popup the below warning windows:
Click Ok button to enter into the interface. Then it will popup the below
warning windows:
Please close the popup windows by the X button.
5) Click “No card mode” button, it will popup a windows, please see below,
please click OK button then switch on the S800.
6) The S800 will connect the PC by USB Cable, you can check the process
information at the right-bottom text label on the software. When it displays
“Reload successfully, connected with pc”, then you can do the next step.
And all parameters will be dump.
Otros manuales para S800
1
Tabla de contenidos
