Keysight M9614A Manual del operador

Keysight M9614A/M9615A

PXIe 5-Channel

Precision Source/Measure Unit

Quick Startup Poster

Installation Procedure

This document provides the brief installation procedure. Go to www.keysight.com/find/m9614a or

www.keysight.com/find/m9615a and get Keysight M9614A/M9615A Startup Guide and Keysight M9614A/M9615A

software installer. Refer to the Startup Guide for more information.

1. Unpack the module and inspect it for any shipping damage.

2. Verify the shipment contents. The following items must be included in this shipment.

- M9614A or M9615A PXIe 5-Channel Precision Source/Measure Unit module, 1 ea.

- Connector-Terminal Block, 1 ea.

- Short Bar, 1 ea.

- Certificate of Calibration (without test data), 1 ea.

- Quick Startup Poster (this document), 1 ea.

3. Install the software.

Requirements: The followings are required for installing the software.

- Controller (desktop PC, laptop PC, rackmount PC, or PXIe embedded computer) installed with Keysight IO

Libraries Suite

- Keysight PXIe chassis which has already been set up

Copy the M9614A/M9615A software installer into the controller, launch it, and follow the instruction prompts

to install the software.

Declaration of Conformity

Declarations of Conformity for this product and for other Keysight products may be downloaded from the Web. Go

to www.keysight.com/go/conformity. You can then search by product number to find the latest Declaration of

Conformity.

Please use ESD Precautions when handling and operating.

*M9615-90100*

This information is subject to change without notice.

M9615-90100

www.keysight.com

4. Install the module.

a. Make sure that the power cord is plugged into a grounded outlet.

b. Make sure that the chassis power switch is Off.

c. If the chassis has multiple fan speed settings, ensure that the fans are set to automatic.

d. Remove the filler panel that covers the slot in which you want to install the module.

e. Remove thread protectors from the top and bottom mounting screws of the module.

f. Hold the module by the injector/ejector handle and slide it into the slot.

g. Latch the module by pulling up on the injector/ejector handle and secure the front panel to the chassis using the

module front-panel mounting screws.

h. Tighten the screws on the module front panel.

i. Install all chassis covers, filler panels, and air scoops after installing the module.

5. Verify operation of the module.

a. Make sure that the chassis and the controller are turned off.

b. If you are using a remote controller (rackmount, desktop, or laptop PC), connect a PXIe cable between the chassis

and the controller.

c. Power up the chassis. Verify that the chassis fans are operating and free of obstructions that may restrict airflow.

d. Power up the controller.

e. Check that the controller automatically recognizes the module in the device manager; e.g. via Start menu >

Windows System Tools > Control Panel > Device Manager. The module should be visible in the device tree.

The controller might request a reboot. Reboot the controller, if requested.

f. Check if the module is also visible in the Keysight Connection Expert; e.g. via Start menu > Keysight Connection

Expert.

Latest Information

To get the latest firmware, software, electronic manuals, and support information, go to www.keysight.com. You can

then search them by product number.

Otros manuales para M9614A

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de Keysight

Keysight

Keysight M9392A Guía del usuario

Keysight

Keysight x-series Manual de servicio

Keysight

Keysight N8262A Manual de usuario

Keysight

Keysight 4284A Guía de instalación

Keysight

Keysight E5063A Manual de usuario

Keysight

Keysight N5247B Manual de usuario

Keysight

Keysight E5063A Manual de usuario

Keysight

Keysight E4982A Manual de usuario

Keysight

Keysight 16861A Manual de usuario

Keysight

Keysight N9021B MXA Guía de inicio rápido

Keysight

Keysight U1190A Series Manual de usuario

Keysight

Keysight N1911A Instrucciones de funcionamiento

Keysight

Keysight M9601A Guía del usuario

Keysight

Keysight NFA Series Manual de uso y cuidado

Keysight

Keysight 16801A Manual de usuario

Keysight

Keysight M9709A Guía del usuario

Keysight

Keysight NFA Series Manual del propietario

Keysight

Keysight M9290A Manual de usuario

Keysight

Keysight E5081A ENA-X Series Guía del usuario

Keysight

Keysight N9912A Manual de usuario

Keysight

Keysight U1461A Manual de usuario

Keysight

Keysight N5244AU- H29 Manual de instalación y operación

Keysight

Keysight x series Manual del propietario

Keysight

Keysight M8290A Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

ADTEK

ADTEK MW-5 Manual de usuario

Acterna

Acterna MS1400 Manual de usuario