Keysight M9601A Manual del operador

Keysight M9601A PXIe

Precision Source/Measure Unit

Quick Startup Poster

Installation Procedure

This document provides the brief installation procedure. Go to www.keysight.com/find/m9601a and get Keysight

M9601A Startup Guide and Keysight M9601A software installer. Refer to the Startup Guide for more information.

1. Unpack the module and inspect it for any shipping damage.

2. Verify the shipment contents. The following items must be included in this shipment.

- M9601A PXIe Precision Source/Measure Unit module, 1 ea.

- Connector-Terminal Block, 1 ea.

- Short Bar, 1 ea.

- Certificate of Calibration (without test data), 1 ea.

- Quick Startup Poster (this document), 1 ea.

3. Install the software.

Requirements: The followings are required for installing the software.

- Controller (desktop PC, laptop PC, rackmount PC, or PXIe embedded computer) installed with Keysight IO

Libraries Suite

- Keysight PXIe chassis which has already been set up

Copy the M9601A software installer into the controller, launch it, and follow the instruction prompts to install

the software.

Declaration of Conformity

Declarations of Conformity for this product and for other Keysight products may be downloaded from the Web. Go

to www.keysight.com/go/conformity. You can then search by product number to find the latest Declaration of

Conformity.

Please use ESD Precautions when handling and operating.

*M9601-90100*

This information is subject to change without notice.

M9601-90100

www.keysight.com

4. Install the module.

a. Make sure that the power cord is plugged into a grounded outlet.

b. Make sure that the chassis power switch is Off.

c. If the chassis has multiple fan speed settings, ensure that the fans are set to automatic.

d. Remove the filler panel that covers the slot in which you want to install the module.

e. Remove thread protectors from the top and bottom mounting screws of the module.

f. Hold the module by the injector/ejector handle and slide it into the slot.

g. Latch the module by pulling up on the injector/ejector handle and secure the front panel to the chassis using the

module front-panel mounting screws.

h. Tighten the screws on the module front panel.

i. Install all chassis covers, filler panels, and air scoops after installing the module.

5. Verify operation of the module.

a. Make sure that the chassis and the controller are turned off.

b. If you are using a remote controller (rackmount, desktop, or laptop PC), connect a PXIe cable between the chassis

and the controller.

c. Power up the chassis. Verify that the chassis fans are operating and free of obstructions that may restrict airflow.

d. Power up the controller.

e. Check that the controller automatically recognizes the module in the device manager; e.g. via Start menu >

Windows System Tools > Control Panel > Device Manager. The module should be visible in the device tree.

The controller might request a reboot. Reboot the controller, if requested.

f. Check if the module is also visible in the Keysight Connection Expert; e.g. via Start menu > Keysight Connection

Expert.

Latest Information

To get the latest firmware/software/electronic manuals/support information, go to www.keysight.com. You can then

search them by product number.

Otros manuales para M9601A

Tabla de contenidos

Otros manuales de Instrumento de medición de Keysight

Keysight

Keysight PNA-L N5231A Manual de instalación y operación

Keysight

Keysight 8990B Manual de usuario

Keysight

Keysight PD1000A Guía del usuario

Keysight

Keysight N5227A Manual de usuario

Keysight

Keysight P-Series Guía de instalación

Keysight

Keysight M3102A PXIe Manual de usuario

Keysight

Keysight N7020A Manual de usuario

Keysight

Keysight Streamline Series Manual de usuario

Keysight

Keysight U8903B Manual de usuario

Keysight

Keysight N2140A Manual de usuario

Keysight

Keysight 11644A R Manual de usuario

Keysight

Keysight N9912A Manual de usuario

Keysight

Keysight E5061B Manual de usuario

Keysight

Keysight E4981A Manual de usuario

Keysight

Keysight 16196A Manual de operación

Keysight

Keysight x series Manual de instalación y operación

Keysight

Keysight PNA-X N5241A Manual de usuario

Keysight

Keysight N5224AU-217 Manual de instalación y operación

Keysight

Keysight M9005A Manual de usuario

Keysight

Keysight N6705 Manual de usuario

Keysight

Keysight M9260A Instrucciones de funcionamiento

Keysight

Keysight u2722a Manual de usuario

Keysight

Keysight N9923A Manual de usuario

Keysight

Keysight N5227BU-420 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

ADTEK

ADTEK MW-5 Manual de usuario

Acterna

Acterna MS1400 Manual de usuario