Keysight Technologies Infiniium 9000 Series Manual de usuario

Keysight Infiniium 9000 Series

Oscilloscopes

User’s Guide

Distributed by:

dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ [email protected] ▪ www.datatec.de

Notices

2017

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation

into a foreign language) without prior agree-

ment and written consent from Keysight

Technologies as governed by United States

and international copyright laws.

Manual Part Number

54904-97020

Edition

Fifth Edition, January 2017

Available in electronic format only

Published by:

Keysight Technologies

1900 Garden of the Gods Rd.

Colorado Springs, CO 80907 USA

Warranty

The material contained in this docu-

ment is provided “as is,” and is subject

to being changed, without notice, in

future editions. Further, to the maxi-

mum extent permitted by applicable

law, Keysight disclaims all warranties,

either express or implied, with regard

to this manual and any information

contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a par-

ticular purpose. Keysight shall not be

liable for errors or for incidental or

consequential damages in connection

with the furnishing, use, or perfor-

mance of this document or of any infor-

mation contained herein. Should

Keysight and the user have a separate

written agreement with warranty terms

covering the material in this document

that conflict with these terms, the war-

ranty terms in the separate agreement

will control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

U.S. Government Rights

The Software is “commercial computer

software,” as defined by Federal Acquisition

Regulation (“FAR”) 2.101. Pursuant to FAR

12.212 and 27.405-3 and Department of

Defense FAR Supplement (“DFARS”)

227.7202, the U.S. government acquires

commercial computer software under the

same terms by which the software is

customarily provided to the public.

Accordingly, Keysight provides the Software

to U.S. government customers under its

standard commercial license, which is

embodied in its End User License Agreement

(EULA), a copy of which can be found at

www.keysight.com/find/sweula. The

license set forth in the EULA represents the

exclusive authority by which the U.S.

government may use, modify, distribute, or

disclose the Software. The EULA and the

license set forth therein, does not require or

permit, among other things, that Keysight:

(1) Furnish technical information related to

commercial computer software or

commercial computer software

documentation that is not customarily

provided to the public; or (2) Relinquish to,

or otherwise provide, the government rights

in excess of these rights customarily

provided to the public to use, modify,

reproduce, release, perform, display, or

disclose commercial computer software or

commercial computer software

documentation. No additional government

requirements beyond those set forth in the

EULA shall apply, except to the extent that

those terms, rights, or licenses are explicitly

required from all providers of commercial

computer software pursuant to the FAR and

the DFARS and are set forth specifically in

writing elsewhere in the EULA. Keysight

shall be under no obligation to update,

revise or otherwise modify the Software.

With respect to any technical data as

defined by FAR 2.101, pursuant to FAR

12.211 and 27.404.2 and DFARS 227.7102,

the U.S. government acquires no greater

than Limited Rights as defined in FAR 27.401

or DFAR 227.7103-5 (c), as applicable in any

technical data.

Safety Notices

CAUTION

A CAUTION notice denotes a hazard.

It calls attention to an operating

procedure, practice, or the like that,

if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a CAU-

TION notice until the indicated con-

ditions are fully understood and

met.

WARNING

A WARNING notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in personal

injury or death. Do not proceed

beyond a WARNING notice until the

indicated conditions are fully

understood and met.

For more safety information, refer to the For

Your Safety booklet included with your

Infiniium oscilloscope.

Keysight Infiniium 9000 Series Oscilloscopes User’s Guide 3

Infiniium 9000 Series Oscilloscopes—At a Glance

DSO9024H, DSO9054H, DSO9104H, and DSO9204H models have up to 12 bits of high resolution.

Table 1 9000 Series oscilloscope models

Model Analog

bandwidth

Standard memory depth

(2/4-channel mode)

DSO/MSO9064A 600 MHz 40 Mpts/20 Mpts

DSO/MSO9104A 1 GHz 40 Mpts/20 Mpts

DSO/MSO9254A 2.5 GHz 40 Mpts/20 Mpts

DSO/MSO9404A 4 GHz 40 Mpts/20 Mpts

DSO9024H 250 MHz 100 Mpts/50 Mpts

DSO9054H 500 MHz 100 Mpts/50 Mpts

DSO9104H 1 GHz 100 Mpts/50 Mpts

DSO9204H 2 GHz 100 Mpts/50 Mpts

4 Keysight Infiniium 9000 Series Oscilloscopes User’s Guide

Ease of use with high performance

• The Keysight Technologies Infiniium oscilloscopes combine unprecedented

ease-of-use with high-performance digitizing oscilloscope functionality to

simplify your design and analysis measurement tasks.

• Traditional oscilloscope front-panel interface provides direct access to the

controls needed for most troubleshooting tasks.

• Graphical user interface with menus, windows, dialog boxes, and toolbars

provides easy access to dozens of configuration and analysis tools, ensuring

you can set up and make the most complex measurements.

• Models with bandwidths from 250 MHz to 4 GHz.

Display shows waveforms and graphical user interface

• Graphical interface allows direct interaction with waveforms, including

drag-and-drop positioning and instant waveform zoom.

• Touchscreen display allows oscilloscope operation without an external pointing

device.

•Waveformsdisplayedincolor,making correlations easy.

• Current configuration parameters displayed near the waveform display and are

color-coded to make identification easy.

• Graphical interface menus and toolbars simplify complex measurement setups.

Horizontal controls set sweep speed and position

• Main sweep speeds from 5 ps/div to 20 s/div.

• Intensified waveforms on main sweep window make it easy to see what will

appear in the zoom window.

Acquisition and general controls start and stop the scope and do basic

setup

• Run and stop controls for continuous or single acquisitions.

•Cleardisplaybeforeone or more acquisitions.

• Default setup and Autoscale set initial configuration.

Hard disk drive and USB 2.0 port for saving and restoring setups and

measurement results

•Storemeasurementdisplaysfor inclusion in reports and test setup guides.

• Store oscilloscope setups to repeat tests another time.

• Hard disk stores oscilloscope operating system.

Trigger setup controls set mode and basic parameters

• Select Edge, Glitch, or Advanced Modes.

• Choose input source and slope.

Keysight Infiniium 9000 Series Oscilloscopes User’s Guide 5

• Use graphical user interface to simplify configuration of pattern, state, delay,

and violation trigger modes.

Vertical controls set attenuation and position

• Input attenuation adjustable from 1 mV/div to 1 V/div.

• Color-coded knobs make it easy to find the controls that affect each waveform.

Marker and quick measurements help measure waveform parameters

• Use waveform markers 1 and 2 to check voltage or Δ-time at any point on the

displayed waveform.

For more information about Infiniium oscilloscopes, see

www.keysight.com/find/scope.

6 Keysight Infiniium 9000 Series Oscilloscopes User’s Guide

In This Guide

This guide provides the information you need to begin using the Infiniium 9000

Series oscilloscope.

Chapter 1, “Setting Up the Oscilloscope,” starting on page 9 includes power and

air flow requirements, plus other setup information.

Chapter 2, “Using the Oscilloscope,” starting on page 27 gives an overview of the

front and side panel inputs and outputs, front-panel controls, and user interface,

and tells you how to perform basic operations with the oscilloscope.

Chapter 3, “Online Help and Other Information,” starting on page 47 describes the

Infiniium oscilloscope application’s online help contents and online demos. The

online help describes how to use the Infiniium oscilloscope application in detail.

For More Information

• For detailed information on how the oscilloscope makes measurements and

how to use the oscilloscope, see the Infiniium oscilloscope application’s online

help.

• For information on controlling the oscilloscope from a remote computer, see

the Keysight Infiniium Oscilloscopes Programmer’s Guide found in the Infiniium

oscilloscope application’s online help.

• For information on testing and servicing the oscilloscope, see the Service Guide

found in the Infiniium oscilloscope application’s online help.

Keysight Infiniium 9000 Series Oscilloscopes User’s Guide 7

Contents

Infiniium 9000 Series Oscilloscopes—At a Glance / 3

In This Guide / 6

1 Setting Up the Oscilloscope

Safety / 10

Symbols / 11

Inspecting Package Contents / 12

Environmental Characteristics / 13

Ventilation / 14

Connecting Accessories and Cables / 16

Connecting Power / 18

Connecting Oscilloscope Probes / 20

Tilting the Oscilloscope for Easier Viewing / 21

Turning On the Oscilloscope / 22

Verifying Basic Oscilloscope Operation / 23

Installing Application Programs on Infiniium / 24

Changing Windows Operating System Settings / 25

Turning Off the Oscilloscope / 26

Cleaning the Oscilloscope / 26

2 Using the Oscilloscope

Front Panel Controls (Keys and Knobs) Overview / 28

User Interface Overview / 29

Using the Setup and Display Controls / 32

Starting and Stopping Waveform Acquisitions / 33

Adjusting the Horizontal Time Scale and Trigger Position / 34

Adjusting the Vertical Settings / 36

Setting Up Triggers / 38

8 Keysight Infiniium 9000 Series Oscilloscopes User’s Guide

Using Markers and Making a Measurement / 40

Saving and Printing Data / 44

Forcing a Default Setup / 45

3 Online Help and Other Information

Accessing the Online Help / 47

Navigating the Online Help / 49

Using the Demo Wizard / 50

Keysight Infiniium 9000 Series Oscilloscopes

User’s Guide

1 Setting Up the Oscilloscope

Safety 10

Inspecting Package Contents 12

Environmental Characteristics 13

Ventilation 14

Connecting Accessories and Cables 16

Connecting Power 18

Connecting Oscilloscope Probes 20

Tilting the Oscilloscope for Easier Viewing 21

Turning On the Oscilloscope 22

Verifying Basic Oscilloscope Operation 23

Installing Application Programs on Infiniium 24

Changing Windows Operating System Settings 25

Turning Off the Oscilloscope 26

Cleaning the Oscilloscope 26

This chapter shows how to set up your Infiniium oscilloscope, connect power and

accessories, and verify general operation.

10 Keysight Infiniium 9000 Series Oscilloscopes User’s Guide

1Setting Up the Oscilloscope

Safety

This product has been designed and tested in accordance with accepted industry

standards, and has been supplied in a safe condition. The documentation contains

information and warnings that must be followed by the user to ensure safe

operation and to maintain the product in a safe condition.

Safety Compliance

This product complies with the current editions of the following standards:

• CAN/CSA-C22.2 No. 61010-1-12

• UL Std. No. 61010-1 (3rd edition)

Acoustic Statement

This is to declare that this instrument is in conformance with the German

Regulation on Noise Declaration for Machines (Laermangabe nach der

Maschinenlaermrerordnung -3.GSGV Deutschland).

LpA < 70 dB

Operator position

Normal position per ISO 7779

General Safety Notices

WARNING

This is a Safety Protection Class I Product (provided with a protective earthing

ground incorporated in the power cord). The mains plug shall only be inserted in a

socket outlet provided with a protective earth contact. Any interruption of the

protective conductor inside or outside of the product is likely to make the product

dangerous. Intentional interruption is prohibited.

WARNING

If this product is not used as specified, the protection provided by the equipment

could be impaired. This product must be used in a normal condition (in which all

means for protection are intact) only.

WARNING

No operator-serviceable parts inside. Refer servicing to qualified personnel. To

prevent electrical shock, do not remove covers.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de prueba de Keysight Technologies

Keysight Technologies

Keysight Technologies N2840A Manual de usuario

Keysight Technologies

Keysight Technologies MSO-X 2002A Manual de usuario

Keysight Technologies

Keysight Technologies N5280A Manual

Keysight Technologies

Keysight Technologies 85051B Manual

Keysight Technologies

Keysight Technologies Infiniium V Series Manual de usuario

Keysight Technologies

Keysight Technologies U3022AM06 Manual

Keysight Technologies

Keysight Technologies U3042AE12 Manual

Keysight Technologies

Keysight Technologies U9361C Manual de usuario

Keysight Technologies

Keysight Technologies N2142A Manual de usuario

Keysight Technologies

Keysight Technologies U3020AD01 Manual

Keysight Technologies

Keysight Technologies InfiniiVision 1000 X-Series Manual de usuario

Keysight Technologies

Keysight Technologies 85032B Manual

Keysight Technologies

Keysight Technologies X Series Manual de instalación y operación

Keysight Technologies

Keysight Technologies DP001 A Series Manual de usuario

Keysight Technologies

Keysight Technologies U2802A Manual de usuario

Keysight Technologies

Keysight Technologies InfiniiVision 4000 X Series Manual

Keysight Technologies

Keysight Technologies U1610/20A Manual de usuario

Keysight Technologies

Keysight Technologies 11683AZ Option H01 Manual de servicio

Keysight Technologies

Keysight Technologies 1000A Series Manual de usuario

Keysight Technologies

Keysight Technologies E6640A Manual de usuario

Keysight Technologies

Keysight Technologies Infiniium 90000A Series Manual de usuario

Keysight Technologies

Keysight Technologies InfiniVision 6000L Series Manual de usuario

Keysight Technologies

Keysight Technologies 85041A Manual de servicio

Keysight Technologies

Keysight Technologies 11644A Series Manual

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario