Keysight Technologies 85051B Manual

User's and

Service Guide

This manual applies directly to 85051B Verification

Kits that have serial number prefix 2815A. The

verification devices in this kit are individually

serialized.

Keysight 85051B 7 mm

Verification Kit

Notices

1995-2018

No part of this manual may be

reproduced in any form or by any

means (including electronic storage

and retrieval or translation into a

foreign language) without prior

agreement and written consent from

Keysight Technologies, Inc. as

governed by United States and

international copyright laws.

Trademark Acknowledgments

Manual Part Number

85051-90031

Edition

Edition 1, November 2018

Printed in USA/Malaysia

Published by:

Keysight Technologies

1400 Fountaingrove Parkway

Santa Rosa, CA 95403

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED “AS IS,”

AND IS SUBJECT TO BEING

CHANGED, WITHOUT NOTICE, IN

FUTURE EDITIONS. FURTHER, TO

THE MAXIMUM EXTENT PERMITTED

BY APPLICABLE LAW, KEYSIGHT

DISCLAIMS ALL WARRANTIES,

EITHER EXPRESS OR IMPLIED WITH

REGARD TO THIS MANUAL AND

ANY INFORMATION CONTAINED

HEREIN, INCLUDING BUT NOT

LIMITED TO THE IMPLIED

WARRANTIES OF

MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE.

KEYSIGHT SHALL NOT BE LIABLE

FOR ERRORS OR FOR INCIDENTAL

OR CONSEQUENTIAL DAMAGES IN

CONNECTION WITH THE

FURNISHING, USE, OR

PERFORMANCE OF THIS

DOCUMENT OR ANY INFORMATION

CONTAINED HEREIN. SHOULD

KEYSIGHT AND THE USER HAVE A

SEPARATE WRITTEN AGREEMENT

WITH WARRANTY TERMS

COVERING THE MATERIAL IN THIS

DOCUMENT THAT CONFLICT WITH

THESE TERMS, THE WARRANTY

TERMS IN THE SEPARATE

AGREEMENT WILL CONTROL.

Technology Licenses

The hardware and/or software

described in this document are

furnished under a license and may be

used or copied only in accordance

with the terms of such license.

U.S. Government Rights

The Software is “commercial

computer software,” as defined

by Federal Acquisition Regulation

(“FAR”) 2.101. Pursuant to FAR

12.212 and 27.405-3 and

Department of Defense FAR

Supplement (“DFARS”) 227.7202,

the U.S. government acquires

commercial computer software

under the same terms by which

the software is customarily

provided to the public.

Accordingly, Keysight provides

the Software to U.S. government

customers under its standard

commercial license, which is

embodied in its End User License

Agreement (EULA), a copy of

which can be found at

http://www.keysight.com/find/sweula

The license set forth in the EULA

represents the exclusive authority

by which the U.S. government

may use, modify, distribute, or

disclose the Software. The EULA

and the license set forth therein,

does not require or permit,

among other things, that

Keysight: (1) Furnish technical

information related to

commercial computer software

or commercial computer

software documentation that is

not customarily provided to the

public; or (2) Relinquish to, or

otherwise provide, the

government rights in excess of

these rights customarily provided

to the public to use, modify,

reproduce, release, perform,

display, or disclose commercial

computer software or

commercial computer software

documentation. No additional

government requirements

beyond those set forth in the

EULA shall apply, except to the

extent that those terms, rights, or

licenses are explicitly required

from all providers of commercial

computer software pursuant to

the FAR and the DFARS and are

set forth specifically in writing

elsewhere in the EULA. Keysight

shall be under no obligation to

update, revise or otherwise

modify the Software. With

respect to any technical data as

defined by FAR 2.101, pursuant

to FAR 12.211 and 27.404.2 and

DFARS 227.7102, the U.S.

government acquires no greater

than Limited Rights as defined in

FAR 27.401 or DFAR 227.7103-5

(c), as applicable in any technical

data.

Safety Notices

A CAUTION notice denotes a hazard. It

calls attention to an operating

procedure, practice, or the like that,

if not correctly performed or adhered

to, could result in damage to the

product or loss of important data. Do

not proceed beyond a CAUTION

notice until the indicated conditions

are fully understood and met.

A WARNING notice denotes a hazard.

It calls attention to an operating

procedure, practice, or the like that,

if not correctly performed or adhered

to, could result in personal injury or

death. Do not proceed beyond a

WARNING notice until the indicated

conditions are fully understood and

met.

Contents

Keysight 85051B User’s and Service Guide 3

1. General Information

Verification Kit Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Kit Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Calibration Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Equipment Required but Not Supplied . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Incoming Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Recording the Device Serial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Clarifying the Terminology of a Connector Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Preventive Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Downloading the Documentation from the Web. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

2. Specifications

Environmental Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Temperature—What To Watch Out For . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Mechanical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Center Conductors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Airline Mechanical Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

3. Use, Maintenance, and Care of the Devices

Electrostatic Discharge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Visual Inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Look for Obvious Defects and Damage First . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Inspect the Mating Plane Surfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Cleaning Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Gaging Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

Connector Gage Accuracy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

When to Gage Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

Reading the Connector Gage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

Gaging Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9

Gaging the Airline. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12

Making Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14

How to Make a Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14

Connecting the Airline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16

How to Separate a Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-20

Handling and Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21

4. Performance Verification

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

How Keysight Verifies the Devices in Your Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

4 Keysight 85051B User’s and Service Guide

Contents

Recertification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

How Often to Recertify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Where to Send a Kit for Recertification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

5. Troubleshooting

Troubleshooting Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-1

Compatible Network Analyzers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Where to Look for More Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Returning a Kit or Device to Keysight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4

Contacting Keysight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4

6. Replaceable Parts

Replacing the Verification Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

Copying Replacement Device Verification Data to the Original Verification Data Media . . . 6-2

Old Verification Device Data – Backup Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2

New Verification Device Data – Transfer Process. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3

Replaceable Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4

Keysight 85051B 7 mm

Verification Kit

User’s and Service Guide

1 General Information

Verification Kit Overview

The Keysight 85051B 7 mm verification kit provides a set of standards with

known characteristics, traceable to a reference (golden) standard in Keysight

Technologies calibration lab. This set of standards is used to verify your

measurement calibration and also to verify that your PNA system is operating

within its specifications. The frequency range covered by the 85051B is from 45

MHz to 18 GHz.

Kit Contents

The 85051B verification kit includes the following items:

— 20 dB attenuator

— 50 dB attenuator

—25Ωmismatch airline

—50Ωairline

— open-end wrench

—storagebox

— User’s and Service Guide (this manual)

— USB drive that contains factory-measured verification data for use with the

PNA system verification process

— data sheet for each device that contains factory-measured verification data

—anti-virusscanreport

Refer to Chapter 6, “Replaceable Parts”, on page 1 for a complete list of

replaceable part numbers.

Important! Backup copies of the data sheets, anti-virus scan reports, and

the data contained on the USB drive should be made immediately upon

receipt of the verification kit.

1-2 85051B

General Information

Incoming Inspection

Calibration Definitions

The 85051B verification kit is intended to be used with the 85050B/C/D 7 mm

calibration kits. Prior to performing a calibration with your PNA, the calibration

kit must be selected and the calibration definitions for the devices in the kit

installed in the PNA. Refer to your PNA Help system for instructions on

selecting the calibration kit and performing a calibration.

Installation of the Calibration Definitions

The calibration definitions for the kit should be permanently installed in the

internal memory or hard disk of the PNA. They may already be resident within

the analyzer, or you can download them from Keysight’s Calibration Kit

Definitions Web page at

http://na.support.keysight.com/pna/caldefs/stddefs.html. In addition, the

calibration definitions may be entered manually from the front panel. Refer to

your PNA Help system for instructions.

Equipment Required but Not Supplied

Some items are not supplied with the verification kit but are required to ensure

successful operation of the kit. Refer to Table 6-3 on page 4 for a list of these

items and for ordering information.

Incoming Inspection

Verify that the shipment is complete by referring to the contents list in the

shipping container.

Check for damage. The foam-lined storage case provides protection during

shipping. Verify that this case and its contents are not damaged.

If the case or any device appears damaged, or if the shipment is incomplete,

contact Keysight Technologies. See “Contacting Keysight” on page 4.

Keysight will arrange for repair or replacement of incomplete or damaged

shipments without waiting for a settlement from the transportation company.

Refer to “Returning a Kit or Device to Keysight” on page 4 for instructions.

A file containing the verification data for your kit is maintained for one year

from the time of measurement. If you lose this data, contact Keysight. See

“Contacting Keysight” on page 4.

85051B 1-3

General Information

Recording the Device Serial Numbers

In addition to the kit serial number, the devices in this kit are individually

serialized (serial numbers are labeled into the body of each device). Record

these serial numbers in Table . Recording the serial numbers will prevent

confusing the devices in this kit with similar devices from other kits.

Table 1-1 Serial Number Record for the 85051B

Device Serial Number

Verification kit

20 dB attenuator

50 dB attenuator

50Ω airline

25Ω mismatch airline

___________________________

1-4 85051B

General Information

Clarifying the Terminology of a Connector Interface

In this document and in the prompts of the PNA calibration wizard, the sex of

device connectors and adapters is referred to in terms of the center conductor.

For example, a connector or device designated as 1.85 mm –f– has a 1.85 mm

female center conductor.

A connector gage is referred to in terms of the connector that it measures. For

instance, a male connector gage has a female connector on the gage so that it

can measure male devices.

Preventive Maintenance

The best techniques for maintaining the integrity of the devices in this kit

include:

— routine visual inspection

—cleaning

—propergaging

— proper connection techniques

All of these are described in Chapter 3, “Use, Maintenance, and Care of the

Devices.” Failure to detect and remove dirt or metallic particles on a mating

plane surface can degrade repeatability and accuracy and can damage any

connector mated to it. Improper connections, resulting from pin depth values

being out of specification (see Table 2-2 on page 3), or from bad connection

techniques, can also damage these devices.

85051B 1-5

General Information

Downloading the Documentation from the Web

To view the documentation on the web, use the following steps:

1. Go to www.keysight.com.

2. In the Search box, enter the model number of the analyzer (Ex: 85051B)

and click Search.

3. Click Technical Support > Document Library > Manuals

4. Click the User’s and Service Guide title to download the PDF file.

5. When the PDF of the User’s and Service Guide is displayed, scroll through

the Contents section bookmarks to locate the information needed.

1-6 85051B

General Information

Downloading the Documentation from the Web

Otros manuales para 85051B

Tabla de contenidos

Otros manuales de Equipo de prueba de Keysight Technologies

Keysight Technologies

Keysight Technologies U3042AM20 Manual

Keysight Technologies

Keysight Technologies 16380C Guía de inicio rápido

Keysight Technologies

Keysight Technologies 8494 Manual de servicio

Keysight Technologies

Keysight Technologies 85033E Guía de solución de problemas

Keysight Technologies

Keysight Technologies 16034E Manual de operación

Keysight Technologies

Keysight Technologies N4917CPCA Manual de usuario

Keysight Technologies

Keysight Technologies N108 A-Series Manual de usuario

Keysight Technologies

Keysight Technologies PNA-X N524xB Manual de usuario

Keysight Technologies

Keysight Technologies U3020AD01 Manual

Keysight Technologies

Keysight Technologies U3022AE10 Manual

Keysight Technologies

Keysight Technologies U3020AS62 Manual

Keysight Technologies

Keysight Technologies Infiniium MXR Series Manual de usuario

Keysight Technologies

Keysight Technologies 16047A Manual de operación

Keysight Technologies

Keysight Technologies X Series Manual de instalación y operación

Keysight Technologies

Keysight Technologies 85058E Manual

Keysight Technologies

Keysight Technologies 16190B Manual de operación

Keysight Technologies

Keysight Technologies N7700 Manual de usuario

Keysight Technologies

Keysight Technologies InfiniVision 6000L Series Manual de usuario

Keysight Technologies

Keysight Technologies 85056D Manual

Keysight Technologies

Keysight Technologies B1542A Pulsed IV Package Manual de usuario

Keysight Technologies

Keysight Technologies N5222-60124 Manual de instalación y operación

Keysight Technologies

Keysight Technologies InfiniiVision 1000 X-Series Manual de usuario

Keysight Technologies

Keysight Technologies Infiniium 90000A Series Manual de usuario

Keysight Technologies

Keysight Technologies 8490D Manual de servicio

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario