Keysight Technologies U9422A Manual de usuario

Keysight U9422A/ B/ C and

U9424A/ B/ C FET Solid State

Switch Module

Startup and

Service Guide

2 Keysight U9422x and U9424x Startup and Service Guide

Notices

No part of this manual may be

reproduced in any form or by any

means (including electronic storage

and retrieval or translation into a

foreign language) without prior

agreement and written consent from

Keysight Technologies as governed by

United States and international

Manual Part Number

U9422-90001

Edition

Edition 1, November 30, 2021

Printed in Malaysia

Published by:

Keysight Technologies

Bayan Lepas Free Industrial Zone,

11900 Penang, Malaysia

Sales and Technical Support

To contact Keysight for sales and

technical support, refer to the support

links on the following Keysight

websites:

www.keysight.com/ find/ USBSwitch

(product - specific information and

support, software and documentation

updates)

www.keysight.com/ find/ assist

(worldwide contact information for

repair and service)

Declaration of Conformity

Declarations of Conformity for this

product and for other Keysight

products may be downloaded from the

Web. Go to http:/ / www.keysight.com/

go/ conformity. You can then search by

product number to find the latest

Declaration of Conformity.

Warrant y

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED "AS IS,"

AND IS SUBJECT TO BEING

CHANGED, WITHOUT NOTICE, IN

FUTURE EDITIONS. FURTHER, TO THE

MAXIMUM EXTENT PERMITTED BY

APPLICABLE LAW, KEYSIGHT

DISCLAIMS ALL WARRANTIES, EITHER

EXPRESS OR IMPLIED WITH REGARD

TO THIS MANUAL AND ANY

INFORMATION CONTAINED HEREIN,

INCLUDING BUT NOT LIMITED TO THE

IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE. KEYSIGHT

SHALL NOT BE LIABLE FOR ERRORS

OR FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES IN

CONNECTION WITH THE

FURNISHING, USE, OR

PERFORMANCE OF THIS DOCUMENT

OR ANY INFORMATION CONTAINED

HEREIN. SHOULD KEYSIGHT AND THE

USER HAVE A SEPARATE WRITTEN

AGREEMENT WITH WARRANTY

TERMS COVERING THE MATERIAL IN

THIS DOCUMENT THAT CONFLICT

WITH THESE TERMS, THE WARRANTY

TERMS IN THE SEPARATE

AGREEMENT WILL CONTROL.

Technology Licenses

The hardware and/ or soft ware

described in this document are

furnished under a license and may be

used or copied only in accordance with

the terms of such license.

Restricted Rights Notices

If software is for use in the performance

of a U.S. Government prime contract or

subco nt rac t , So ft ware is del ivered and

licensed as "Commercial computer

software" as defined in DFAR

252.227- 7014 (June 1995), or as a

"commercial item" as defined in FAR

2.101(a) or as "Restricted computer

software" as defined in FAR 52.227- 19

(June 1987) or any equivalent agency

regulation or contract clause. Use,

duplication or disclosure of Software is

subject to Keysight Technologies'

standard commercial license terms,

and non- DOD Departments and

Agencies of the U.S. Government will

receive no greater than Restricted

Rights as defined in FAR

52.227- 19(c)(1- 2) (June 1987). U.S.

Government users will receive no

greater than Limited Rights as defined

in FAR 52.227- 14 (June 1987) or DFAR

252.227- 7015 (b)(2) (November 1995),

as applicable in any technical data.

Keysight U9422x and U9424x Startup and Service Guide 3

Safety Considerations

WARNING

– DO NOT operate the product in an explosive atmosphere or in the

presence of flammable gases or fumes.

– DO NOT perform procedures involving cover or shield removal unless you

are qualified to do so: Operating personnel must not remove equipment

covers or shields. Procedures involving the removal of covers and shields

are for use by service- trained personnel only.

– DO NOT service or adjust alone: Under certain conditions, dangerous

voltages may exist even with the equipment switched off. To avoid

dangerous electrical shock, service personnel must not attempt internal

service or adjustment unless another person, capable of rendering first

aid and resuscitation, is present.

– DO NOT operate damaged equipment: Whenever it is possible that the

safety protection features built into this product have been impaired,

either through physical damage, excessive moisture, or any other reason,

do not use the product until safe operation can be verified by

service- trained personnel. If necessary, return t he product to a Keysight

Sales and Service Office for service and repair to ensure the safety

features are maintained.

– DO NOT substitute parts or modify equipment: Because of the danger of

introducing additional hazards, do not install substitute parts or perform

any unauthorized modification to the product. Return the product to a

Keysight Sales and Service Office for service and repair to ensure the

safety features are maintained.

CAUTION

CLEAN WITH SLIGHTLY DAMPENED CLOTH

Clean the outside of the instrument with a soft, lint- free, slightly dampened

cloth. Do not use detergent, volatile liquids, or chemical solvents.

4 Keysight U9422x and U9424x Startup and Service Guide

Regulatory Markings

The CE mark is a registered trademark

of the European Community. The CE

mark shows that the product complies

with all the relevant European Legal

Directives.

CAN ICES/ NMB- 001 indicates that this

ISM device complies with the

Canadian ICES-001.

Cet appareil ISM est conforme a la

norme NMB- 001 du Canada.

ISM GRP.1 Class A indicates that this

is an Industrial Scientific and Medical

Group 1 Class A product.

This Keysight CCR (Customer

Compliance Response) email ID is

for manufacturer identification and

indicates that the product

complies with all the relevant

European Legal Directives.

The UKCA (UK Conformity Assessed)

marking is a UK product marking that

is used for goods being placed on the

market in Great Britain (England,

Wales, and Scotland).

The RCM mark is a registered

trademark of the Australian

Communications and Media

Authority.

This symbol indicates the time period during which no hazardous or toxic substance elements are

expected to leak or deteriorate during normal use. Forty years is the expected useful life of the

product.

The crossed out wheeled bin symbol indicates that separate collection for waste electric and

electronic equipment (WEEE) is required, as obligated by the EU DIRECTIVE and other National

legislation.

Please refer to www.keysight.com/ go/ takeback to understand your Trade-in options with Keysight

in addition to product take back instructions.

This symbol is a South Korean Class A EMC Declaration.

This equipment is Class A suitable for professional use and is for use in electromagnetic

environments outside of the home.

R- R- Kst- W N21767

R- R- Kst- W N21768

R- R- Kst- W N21769

R- R- Kst- W N21770

Keysight U9422x and U9424x Startup and Service Guide 5

South Korean Class A EMC Declaration

Information to the user:

This equipment has been conformity assessed for use in business environments. In

a residential environment, this equipment may cause radio interference.

– This EMC statement applies to the equipment only for use in business

environment.

6 Keysight U9422x and U9424x Startup and Service Guide

THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK.

Keysight U9422x and U9424x Startup and Service Guide 7

Table of Contents

Safety Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Regulatory Markings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

South Korean Class A EMC Declaration . . . . . . . . . . . . . . . . . . . . . . . . .5

1 Getting Started

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Product Model Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Step 1: Unpack and Inspect the U9422x/ U9424x Switch Module . . . .15

ESD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Inspect for Damage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Return for Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Step 2: Install the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Power Up the Host PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Install the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Step 3: Connect and Verify the U9422x/ U9424x Operation . . . . . . . . .19

2 Specifications

Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Physical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

3 Service and Maintenance

Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Clean the Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Make Good Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

8 Keysight U9422x and U9424x Startup and Service Guide

THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK.

Keysight U9422x and U9424x Startup and Service Guide 9

List of Figures

Figure 1- 1 Keysight Connection Expert interface . . . . . . . . . . . . .19

Figure 1- 2 Connect to Instrument Dialog . . . . . . . . . . . . . . . . . . .20

Figure 1- 3 SFP Verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Figure 2- 1 U9422x Switch Module . . . . . . . . . . . . . . . . . . . . . . . .27

Figure 2- 2 U9424x Switch Module . . . . . . . . . . . . . . . . . . . . . . . .27

Figure 3- 1 Wrench Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Figure 3- 2 Using the Torque Wrench . . . . . . . . . . . . . . . . . . . . . .34

10 Keysight U9422x and U9424x Startup and Service Guide

THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Unidad de control de Keysight Technologies

Keysight Technologies

Keysight Technologies 81618A Manual de usuario

Keysight Technologies

Keysight Technologies 34946A Manual de usuario

Keysight Technologies

Keysight Technologies E6650AU-TRX Manual de instalación y operación

Keysight Technologies

Keysight Technologies J7204A Manual de servicio

Keysight Technologies

Keysight Technologies 34946A Manual de usuario

Keysight Technologies

Keysight Technologies 34952A Manual de usuario

Keysight Technologies

Keysight Technologies VXI bus 75000 C Series Manual de usuario

Keysight Technologies

Keysight Technologies J7201A Manual de servicio

Keysight Technologies

Keysight Technologies E8402A Guía de solución de problemas

Keysight Technologies

Keysight Technologies J7211A Manual de servicio

Keysight Technologies

Keysight Technologies M9195A PXIe Guía del usuario

Keysight Technologies

Keysight Technologies 8495D Manual de servicio

Keysight Technologies

Keysight Technologies N9029BV Manual de servicio

Keysight Technologies

Keysight Technologies 11713D Manual de servicio

Keysight Technologies

Keysight Technologies 81490A Manual de usuario

Keysight Technologies

Keysight Technologies M5302A Guía del usuario

Keysight Technologies

Keysight Technologies E4461B Manual de usuario

Keysight Technologies

Keysight Technologies M9168C Manual de usuario

Keysight Technologies

Keysight Technologies E1465A Manual de usuario

Keysight Technologies

Keysight Technologies 81625B Manual de usuario

Keysight Technologies

Keysight Technologies 81650A Manual de usuario

Keysight Technologies

Keysight Technologies M9101A Manual de funcionamiento

Keysight Technologies

Keysight Technologies E8257DS Series Manual de usuario

Keysight Technologies

Keysight Technologies M8000 Series Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario