Key Digital KD-MLV4x4Pro Manual de usuario

521 East 3rd Street Mt. Vernon, NY 10553 • www.keydigital.com

Rev 1.1 –Apr, 2022

4x4 4K HDMI seamless matrix with multi-view tiling,

4 Rx units. Features independent AV routing,

mirrored HDMI and UHDoTP outputs.

521 East 3rd Street Mt. Vernon, NY 10553 • www.keydigital.com

Rev 1.1 –Apr, 2022

Table of Contents

About KD-MLV4X4PRO 3

Quick Setup Guide 5

Connect 5

Configure 5

Control 8

Application Example 11

KD-MLV4x4Pro Connections and LEDs 11

KD-EXMLVRx Connections and LEDs 15

Front Panel Control & LCD 17

IR Remote Control 19

Web User Interface 20

TCP/IP and RS-232 Commands 23

Text Overlay 28

Video Processor Transition Times 29

Integrating with AV over IP Systems 30

Specifications 31

Warranty Information 32

Product Warnings & Safety Instructions 32

Quick Setup Guide

Please visit www.keydigital.com for the latest product documentation,

firmware, control drivers and software downloads. Product features and

specifications are subject to change without notice

Always follow the instructions provided in this Operating Manual.

521 East 3rd Street Mt. Vernon, NY 10553 • www.keydigital.com

Rev 1.1 –Apr, 2022

About KD-MLV4X4PRO

Key Digital’s KD-MLV4x4Pro is a 4 HDMI input with 4 HDMI + 4 UHDoTP mirrored output matrix, multi-view

tiling video processor, and independent audio routing.

KD-MLV4x4Pro is perfect for applications like Sports & Gaming Caves, Bar & Restaurant, Corporate AV, House

of Worship, Entertainment Centers, Museums, and E-Sports. Or, simply use KD-MLV4x4Pro to deliver wow-

factor to your distributed video systems.

The multi-view tiling processor enables users to view up to 4 video sources at the same time on a display in

different default and custom layout presets. Custom and multi-view layouts include the option to layer content,

applying desired bezel frame width and color.

4K / UHD content up to 3840 x 21640p 4:2:0 at 60fps is supported and when in full-screen mode switching from

source to source is completely seamless. Integrate with legacy displays or projectors by applying 4K to 1080p

or 720p down-conversion as needed. Each output has mirrored HDMI and UHDoTP connections, for a total of 8

possible connected displays. Four (4) Receiver units are included, and they get their power from the main unit

for ease of installation.

KD-MLV4x4Pro supports independent audio routing with de-embedding on analog balanced/un-balanced and

digital optical connections and surround formats up to 5.1 Dolby® / DTS™. Audio from any source may be

selected while in multi-view mode.

For ease of installation and viewing, KD-MLV4x4Pro features 9 built-in test patterns and optional on-screen

display text for each source. KD-MLV4x4Pro supports HDCP 2.2, provides EDID handshaking to the connected

source from a library of 8 AV profiles or a copy of any connected display’s EDID file. IR from a control system

may be input at KD-MLV4x4Pro and extended to control the displays connected to the KD-EXMLVRx units.

Key Features

•Multi-view Tiling Processor: Simultaneously watch multiple sources on a single screen

•Full-Screen Mode: View full-screen content on any display

•Multi-View Mode: Choose from 5 default layouts or create custom presets. The active multi-view layout

is distributed to any display currently in multi-view mode

•Seamless Switching: Un-interrupted screen transitions during source selection while in full-screen

mode

•Built-In UHDoTP Tx with PoC: 4 included KD-EXMLVRx units are powered by KD-MLV4x4Pro

•Mirrored Outputs: Simultaneously active HDMI + UHDoTP connections per output show same AV

signal at same time for a total of 8 possible displays connected

•Independent Audio Matrix: Audio output ports may be routed separately from HDMI & UHDoTP ports.

Audio from any source may be selected while in multi-view mode.

•Video Resolution: Up to 3840 x 2160p 4:2:0 60fps supported on inputs and 3840 x 2160 4:4:4 at 30fps

on outputs

521 East 3rd Street Mt. Vernon, NY 10553 • www.keydigital.com

Rev 1.1 –Apr, 2022

•Signal Extension over CAT:

o4K/UHD: Up to 35m (115ft) using CAT5e/6, up to 40m (131ft) using CAT6A STP

o1080p: Up to 50m (164ft) maximum, up to 60m (197ft) using CAT6A STP

oMinimum: 5m (17ft) CAT5e/6 cable length required for all resolutions

•Text Overlay: Assigned name of each source may be displayed in each window. 16 Characters

maximum with variable sizing and location settings.

•4K Down-Convert: Integrate 4K sources with legacy 1080p & 720p displays

•Image Layering: Stack images with customizable priority settings per output

•Window Border: Choose window bezel width and coloring

•HDCP 2.2 Licensing: Fully licensed and compatible with HDCP 2.2

•Built-In Test Patterns: 9 selectable test screens help expedite installation, verify cabling & functionality

•IR Two-Way: Extend IR via Rx units to control displays or collect IR from remote to control a source at

matrix.

•Web UI: Control AV routing and other basic functions from any web browser

•Audio De-Embed: 6 pin balanced / un-balanced and digital optical outputs

•Dolby Digital® & DTS™ Audio: Supports 2-channel and multi-channel surround formats up to 5.1

Dolby® / DTS™

•Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication to

source & display, and EDID handshake to source

•EDID Management: Internal library with 8 EDID AV handshakes per input, in addition to ability to copy

from any connected display / output

•TMDS Re-clocking: Supports long HDMI connectivity using Key Digital® HDMI cables

•Deep Color Support: Up to 8 bits/color

•Control: Front panel buttons, IR, RS-232, TCP-IP and Web Control

•Key Digital® App Ready: Can be controlled over TCP/IP via Key Digital® App

•Control System Support: Key Digital® app ready. Key Digital Management Software™ Pro (KDMS™

Pro) ready, Compass Control® Pro ready. Fully controllable by all IR, RS-232, and TCP/IP supported

control systems via open API.

Accessories

•(1) Power supply, 12V 5A screw-type,

model KDPS60W12VC

•(1) IR Remote Control, model KDRMLV4x4

•(4) UHDoTP Rx units, model KD-EXMLVRx

•(4) IR Emitters with 3.5mm mono end. 6ft.

•(4) IR Sensors with 3.5mm 4 conductor

end. 6ft.

•(4) 6-pin Phoenix connector for audio, blue

•(1) 6-pin Phoenix connector for unit control

•(1) USB data cable, Micro to A, 6ft, USB 2.0

•(2) Rack ears

521 East 3rd Street Mt. Vernon, NY 10553 • www.keydigital.com

Rev 1.1 –Apr, 2022

Quick Setup Guide

Begin with the KD-MLV4X4PRO and KD-EXMLVRx units, all source, display devices, audio system, and

any other connected peripherals powered off.

Connect

1. Connect video sources into the HDMI input ports

2. Connect video displays / projectors to the HDMI output ports on the main and Rx units

3. Connect CAT5e/6 cabling from the main unit’s UHDoTP outputs to the RX unit’s UHDoTP input

4. Connect audio using the digital or analog outputs ports located on the main unit.

5. Connect Control System. For KD-App control and/or IP control from a control system or PC, connect

TCP/IP port to network. RS-232 and IR control may also be utilized

6. (Optional) Connect IR to / from Rx units

a. If controlling display/projector: Connect from control system into IR In/Out ports of main unit

and connect IR emitter to the IR Out port of the respective Rx unit (1→1 … 4→4).

b. If controlling video source: Connect IR sensor to Rx unit to collect line-of-site IR from a

remote. Connect IR emitter to the respective IR In/Out port of main unit (1→1 … 4→4).

7. Connect power. Screw-in power supply to the KD-MLV4X4PRO unit, and then connect power to

outlets.

8. Power on sources, displays, and audio systems to begin use.

Configure

Configure KD-MLV4X4PRO with Key Digital Management Software Pro (KDMS Pro). Download HERE

1. Connect to KD-MLV4X4PRO from your PC using the USB micro port on the face of the unit

2. Open the KDMS Pro software and perform a USB scan (2a). Choose “NO” and Start Scan when the

USB Device Scan prompt appears (2b)

3. Choose the detected device from the Devices window (fig. 3)

4. Enter the desired unit name (4a), IP address (4b) and IP gateway (4c) settings for the unit

5. Save (5)

6. Select the desired EDID handshake for each video source (6)

7. (Optional) Set the direction of the IR signal. The default setting / signal flow is IR In on the MLV4x4Pro

and IR out on the Rx units to control the connected displays/projectors.

8. Set the desired Input/Output names by entering the Input/Output Settings section of the properties

window and selecting the Change Input/Output Name button (7a), selecting the desired input/output

(7b), entering the desired name (7d) and pressing the Change button (7d).

521 East 3rd Street Mt. Vernon, NY 10553 • www.keydigital.com

Rev 1.1 –Apr, 2022

9. Your unit is now ready to control from the web UI, KDMS Pro control panel, KD-App, or by professional

control system. Full access to all settings/commands is achieved via terminal session using Tera Term

or PuTTy software.

521 East 3rd Street Mt. Vernon, NY 10553 • www.keydigital.com

Rev 1.1 –Apr, 2022

521 East 3rd Street Mt. Vernon, NY 10553 • www.keydigital.com

Rev 1.1 –Apr, 2022

Control

Option 1: Control via Remote Control

Refer to IR Remote Control section for complete control options via IR.

•Switching HDMI AV + External Audio together

1. R1 button (section E)

2. Output button (section B)

3. Input button (section D)

•Select multi-view layout for all multi-view zones

1. R1 button (section E)

2. Layout 1-9, using Device Select buttons (section F)

▪1-5 = same as layouts 1-5 on front panel and

pictured below

▪6-9 = custom layouts

•Audio Selection in Multi-View mode

1. Audio button (section A)

2. MV button (section C)

3. Input button (section D)

Option 2: Control via KD-App, KDMS Pro™

KD-MLV4x4Pro is controllable by Key Digital’s user-friendly iOS App

(downloadable in the App Store) or Key Digital® Management Software™ Pro

(downloadable here).

1. Connect and Configure your KD- MLV4x4Pro as described in the Connect

& Configure sections

2. Download and open KD-App and/or KDMS™

3. Ensure the iOS device and/or PC computer are on the same network with

KD- MLV4x4Pro

4. Perform a network scan in the KD-App/KDMS™

5. Select and control the selected KD- MLV4x4Pro

6. To enter KDMS Pro end-user mode, key CTRL + ALT + N after selecting

the unit in the devices tree.

521 East 3rd Street Mt. Vernon, NY 10553 • www.keydigital.com

Rev 1.1 –Apr, 2022

Option 3: Control via web UI

Access KD-MLV4x4Pro’s web UI from any phone, tablet, or

PC. The web UI shows the input, output, and unit name, for a

user-friendly experience.

1. Connect and Configure your KD- MLV4x4Pro as

described in the Connect & Configure sections

2. Ensure the PC, phone, or tablet are on the network

with KD- MLV4x4Pro

3. Enter IP Address of KD-MLV4x4Pro unit into the web

browser search bar

4. Enter the password. Default password is “admin”

5. Use the web UI to control video routing (5a) and select

multi-view for each output (5b), choose audio sources in multi-view mode (5c) or for independent audio

routing (5d).

521 East 3rd Street Mt. Vernon, NY 10553 • www.keydigital.com

Rev 1.1 –Apr, 2022

Option 4: Control via professional control system

KD-MLV4x4Pro allows control over serial interface for bi-directional communication.

•For RS-232 control use pins 4, 5, and

6 of the Unit Control port. Baud Rate is

57,600

•For TCP/IP control the default static IP

address is 192.168.1.239, with port 23.

•KD-MLV4x4Pro supports KD’s standard matrixing protocol, so if you have controlled a KD matrix with a

third-party control system before, you will likely have success with the same driver/module.

a. Switching HDMI AV + External Audio together

i. SPOxxSIyy xx = output (01-04), yy = input (01-04, 05 = multi-view)

b. Switching HDMI AV Only

i. SPOxxSByy xx = output (01-04), yy = input (01-04, 05 = multi-view)

c. Switching External Audio only

i. SPOxxSAyy xx = output (01-04), yy = input (01-04)

•A carriage return is required at the end of each string. See the TCP/IP and RS-232 Commands section

for full command set and protocol.

Test for proper operation of the unit and cables in your system before permanently securing the

unit for final installation. Ensure that you leave enough ventilation space to provide sufficient

airflow and cooling

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Conmutador de matriz de Key Digital

Key Digital

Key Digital KD-4x4CSA Manual de usuario

Key Digital

Key Digital FatBOY KD-MSA8X8 Manual de usuario

Key Digital

Key Digital KD-4x2CS Champion Manual de usuario

Key Digital

Key Digital KD-MLV4x2Pro Manual de usuario

Key Digital

Key Digital KD-MS4x4G Manual de usuario

Key Digital

Key Digital KD-HDMS4X4 Hercules Manual de usuario

Key Digital

Key Digital KD-4x4CSK Manual de usuario

Key Digital

Key Digital KD-MAX8x8 Manual de usuario

Key Digital

Key Digital Flash Matrix KD-MSW8x3 Manual de usuario

Key Digital

Key Digital Champion KD-16x16CS Manual de usuario

Key Digital

Key Digital KD-MSVA4X4 FatBOY Manual de usuario

Key Digital

Key Digital KD-CATRCAAA Manual de usuario

Key Digital

Key Digital Champion KD-4X4XC Manual de usuario

Key Digital

Key Digital KD-MSWCAT4x4 FatBOY Manual de usuario

Key Digital

Key Digital KD-MSW4x2Pro Manual de usuario

Key Digital

Key Digital KD-MSWCAT8x8 FatBOY Instrucciones de instalación y funcionamiento

Key Digital

Key Digital KD-MSW 8x3 Manual de usuario

Key Digital

Key Digital KD-VW4x4ProK Manual de usuario

Key Digital

Key Digital Digital IQ Series Manual de usuario

Key Digital

Key Digital KD-VW4x4Pro Manual de usuario

Key Digital

Key Digital KD-MSVA4X4Pro Manual de usuario

Key Digital

Key Digital KD-MSV8X8 Manual de usuario

Key Digital

Key Digital KD-UPS52U Manual de usuario

Key Digital

Key Digital KD-HDMS8X8 Manual de usuario

Manuales populares de Conmutador de matriz de otras marcas

Broadcast Tools

Broadcast Tools SS 8.2 Manual de usuario

Altimium

Altimium MATF32 Manual de usuario

ALFAtron

ALFAtron ALF-MUK44N Manual de usuario

Monoprice

Monoprice Blackbird 15377 Manual de usuario

Kramer

Kramer XL 3216VS Manual de usuario

PTN

PTN FMX12 Manual de usuario

CYP

CYP nT15GX01 Manual de usuario

Kramer

Kramer VP-2x2 Manual de usuario

Kramer

Kramer Sierra Video 6432V5xl Manual de usuario

TESmart

TESmart HMA0402A40 Manual de usuario

Octava

Octava HD4XSTPMX Manual de usuario

Intelix

Intelix FLX-88 Instrucciones de funcionamiento

Kramer

Kramer LASSEN XL 3232S Manual de usuario

Roland

Roland XS-1HD Manual de usuario

Kramer

Kramer VS-66HDCPxl Manual de usuario

Atlona

Atlona AT-HDMI-22M Manual de usuario

Link

Link HD8X8 Manual de usuario

AMX

AMX AVS-OP-2020-117 Instrucciones y recetas