Kettler CTR 300 Manual de usuario

Assembly Instructions

Kettler CTR 300

Cross Trainer

Feb 2021

IMPORTANT

PLEASE KEEP THIS BOOKLET FOR FUTURE REFERENCE.

THIS IS IMPORTANT INFORMATION REGARDING THE USE

AND CARE OF YOUR EXERCISE EQUIPMENT.

Safety Notice

Warning

This cross trainer has been designed and constructed to provide maximum safety.

Nevertheless,certain precautions should be taken when using exercise equipment. Read

the whole manual before assembling and using the cross trainer.

The following safety precautions should also be observed:

• It is the responsibility of the owner to ensure that all users of the cross trainer are adequately

informed of all precautions. Use the cross trainer only as described in this manual.

• Keep children and pets away from this equipment at all times. DO NOT leave them

unsupervised in the room where this cross trainer is kept.

• Inspect and assemble all parts regularly. Replace any worn parts immediately.

• Place the cross trainer on a level surface, with at least 1.0 m of clearance on each side. To

protect the oor or carpet from damage, place a mat under the cross trainer.

• Keep the cross trainer indoors, away from moisture and dust. Keep in a ventilated

environment.

• Don’t put any sharp things around the cross trainer.

• Wear appropriate clothes while exercising; do not wear loose clothes that could become

caught on the cross trainer. Always wear athletic shoes for foot protection while exercising.

• Maximum weight 150kg.

• Do not put your hands on the moving parts to prevent injures.

• Keep pedaling speed controlled.

• If your cross trainer does not work as it should, discontinue use immediately.

• No more than one person should operate the cross trainer at one time.

• If you feel pain or dizziness while exercising, stop exercising immediately and consult a

doctor.

Drawing for Assembly

Parts List

No. Name Specication Quantity

1 Main frame 1

2 Front stabiliser 1

3 Rear stabiliser 1

4 Upper Upright post 1

5 Body arm(L) 1

6 Body arm(R) 1

7 Pedal supporter(L) 1

8 Pedal supporter(R) 1

9 Handlebars 1

10 Console 1

11 Motor communication wire 1

12 Console communication wire 1

13 Handle pulse connection wire 2

14 Console outset 2

15 Upright post cover 1

16 Body arm cover 2

17 Body arm cover 2

18 Front pedal supporter cover 2

19 Front pedal supporter cover 2

20 Rear pedal supporter cover 2

21 Rear pedal supporter cover 2

22 Handlebar cover(L) 1

23 Handlebar cover(R) 1

24 Bottle Holder 1

25 Axle Ø17×339.5 1

26 Allen C.K.S. half thread screw M10×60×25 4

27 Spring washer Ø10 8

28 Curved washer Ø10.5×R100×t2.0 10

29 Allen C.K.S. Full thread screw M8x20 9

30 Spring washer Ø8 5

31 Flat washer Ø8.5×,20×t1.5 5

Parts List

No. Name Specication Quantity

32 Hex self-locking nut M10 5

33 Flat washer Ø10 4

34 Idler stopper 1

35 Idler stopper 1

36 Philips pan head full thread screw M4x16 2

37 Philips pan head full thread screw M4x10 16

38 Allen C.K.S. hollow screw Ø 10x45xM6x20 2

39 Flat washer Ø6 2

40 Allen C.K.S. hollow screw M6x15 7

41 Philips C.K.S. self-tapping screw ST4x15 2

42 Philips C.K.S. full head screw M5x10 4

43 Disc plastic buckle Ø 12.4x13 12

44 Philips C.K.S. end-cutting self-tapping screw ST4x10 12

45 Crank iron 2

46 Hex half thread screw M10x55x20 2

47 Hex half thread screw M4x12 2

48 Flat key 5x5x15 2

49 Allen full thread screw M6x15 2

50 Flat washer ØBxØ30xt3.0 2

51 Fixed idler 1

52 Idler connecting shaft Ø15x30 1

53 Hex nut M8 2

54 Hex locking nut M8 6

55 Tension pulley 1

56 Circlip shaft Ø10 1

57 End cap 4

58 Feet pad 5

59 Wheels 2

60 Allen C.K.S. hollow screw Ø8x33xM6x15 2

61 Hex full thread screw M5x60 1

62 Hex nut M5 2

Parts List

No. Name Specication Quantity

63 Deep groove ball bearing 6004-2RS 2

64 Fixed magnetic induction 1

65 Philips washer head end-cutting self-tapping screw ST4-12 1

66 Crank axle sleeve 1 1

67 Crank axle sleeve 3 1

68 Crank axle Ø20x115 1

69 Belt pulley Ø308x22 1

70 Crank axle sleeve 2 1

71 Fixed magnet set 1

72 Magnetic control xed axle Ø12x50 1

73 Brake tension spring 1

74 Magnet motor 1

75 Double way ywheel Ø280/9KG 1

76 Motor belt 540PJ6 1

77 Upright post decoration strip 102x57x8 1

78 Plastic cover Ø42.5x30 2

79 Handle pulse 2

80 Philips C.K.S. self-tapping screw ST4x20 2

81 Pipe plug Ø28xt1 .5 2

82 Foam grip Ø32xt3.0x480 2

83 Circlip for shaft Ø12 2

84 Pedal(L) 406x187x74 1

85 Pedal(R) 406x187x74 1

86 Carriage bolt M10x55x20 4

87 Deep groove ball bearing 6003-2RS 4

88 Deep groove ball bearing 6200-2RS 4

89 Foam grip Ø36xt3.0x720 2

90 Pipe plug Ø32xt1 .5 2

91 Chain cover (L) 1291.1x72x616.2 1

92 Chain cover (R) 1291.1x75.9x616.2 1

93 Philips C.K.S. Self-tapping screw ST4x25 5

Parts List

No. Name Specication Quantity

94 Circlip for holes Ø40 2

95 Self-aligning ball bearing 2203-2RS 2

96 Hex full thread screw M8x120 1

97 Power communication wire 1

98 Magnetic sensor 1

99 Power adapter 1

100 Brake line 1

101 Disc Ø466.6x24.1 2

102 Waved spring washer Ø17 2

103 Hex nut M10 5

104 Allen C.K.S. full head screw M10x20 4

105 Allen C.K.S. half thread screw M10x55x20 2

106 Philips C.K.S. self-tapping screw ST4x16 12

107 Carriage bolt M10x55x20 4

108 Hexagon socket head full thread bolts M8x30 1

109 Cross recessed large at head tapping

screws

ST4x12 4

110 Handle bar cover (front) 1

Product Diagram

Dimension 1620x720x1520mm

Speed Ratio 9

Resistance Fragment 1-32

Stride Length 420x200

Pre-assembly Notes

Open the boxes:

Make sure you check you have all of the parts listed in the box prior to assembly. If there are any

parts missing, please contact the supplier.

Ø6 - Qty 2

Ø17 - Qty 2 Ø8 - Qty 2 Ø10 - Qty 8 M10 - Qty 2 ST4 x 15

- Qty 2

M4 x 10

- Qty 16

M6 x 15

- Qty 2

Ø10 x 45 x M6 x 20 - Qty 2

M10 x 55 x 20 - Qty 2 M10 x 60 x 25 - Qty 4

M10 x 20 - Qty 4

M10 x 55 - Qty 4

M8 x 20 - Qty 4

Ø8.5 x Ø20 x T1.5 - Qty 5 Ø10 - Qty 6 Ø110.5 x R100 x T2.0 - Qty 10

M4 x 16

- Qty 2

M8x30 - Qty 1

Tabla de contenidos

Otros manuales de Equipo de fitness de Kettler

Kettler

Kettler 07708-210 Instrucciones de montaje

Kettler

Kettler racer s Manual de usuario

Kettler

Kettler MONDEO 07852-690 Manual de usuario

Kettler

Kettler KINETIC F3 Manual de instalación y operación

Kettler

Kettler KINETIC F5 Manual de usuario

Kettler

Kettler APOLLO 07426-600 Manual de usuario

Kettler

Kettler SKYLON 5 07655-350 Manual de usuario

Kettler

Kettler Classic Manual de usuario

Kettler

Kettler VECTOR Manual de usuario

Kettler

Kettler Cycle R Manual de usuario

Kettler

Kettler HOI EQ1049-500 Manual de usuario

Kettler

Kettler MASSAGER 7842-600 Manual de usuario

Kettler

Kettler Favorit Manual de instrucciones de instalación

Kettler

Kettler Apollo Manual de usuario

Kettler

Kettler 07752-200 Manual de usuario

Kettler

Kettler Fitmaster Manual de usuario

Kettler

Kettler Prisma Manual de usuario

Kettler

Kettler GOLF M Manual de usuario

Kettler

Kettler 7428-600 Manual de usuario

Kettler

Kettler RIGA 07042-700 Manual de usuario

Kettler

Kettler VITO XL 07861-600 Manual de usuario

Kettler

Kettler 07852-500 Manual de usuario

Kettler

Kettler Favorit Manual de usuario

Kettler

Kettler CONDOR Manual de usuario

Manuales populares de Equipo de fitness de otras marcas

NSD

NSD PB-188P Manual de usuario

Performance

Performance HyperVibe Manual de usuario

Scalamobil

Scalamobil S27 Manual de usuario

Precor

Precor Experience Series Manual de usuario

FYTTER

FYTTER RedMIUM BENCH BE-T6R Manual de usuario

Taurus

Taurus TF-RK1312 Manual de usuario

Nustep

Nustep T5 Manual de usuario

Precor

Precor CW-507 Manual de usuario

Movement

Movement BICEPS Idea Manual de usuario

Kegel8

Kegel8 V For Men Manual de usuario

Skandika

Skandika Styrke II Manual de usuario

BLK BOX

BLK BOX 21-0122-0B Manual de usuario

Stamina

Stamina aeropilates premier 299 Manual de usuario

SPORTSTECH

SPORTSTECH PBX300 Manual de usuario

ParaBody

ParaBody Serious Steel 877102 Manual de usuario

Weslo

Weslo Gym 650 Manual de usuario

Rebel

Rebel ACTIVE RBA-1011 Manual de usuario

4iiii

4iiii FLiiiight Manual de usuario