KERN EOB-A01 Manual de usuario

KERN & Sohn GmbH

Ziegelei 1

D-72336 Balingen

E-Mail: info@kern-sohn.com

Phone: +49-[0]7433- 9933-0

Fax: +49-[0]7433-9933-149

Internet: www.kern-sohn.com

Assembly instructions Tripod

KERN EOB-A01-A01N

Version 1.0

03/2013

EOB-A01

EOB-A01N

EOB-A01-A01N-IA-e-1310

2 EOB-A01-A01N-IA-e-1310

KERN EOB-A01-A01N

Version 1.0 03/2013

Assembly instructions Tripod

Contents

1Technical data.........................................................................................................2

2Scope of delivery ....................................................................................................3

3Assembly EOB-A01.................................................................................................3

3.1 Assemble the tripod to the balance.................................................................................3

3.2 Assemble the display unit to the tripod...........................................................................4

4Assembly EOB-A01N..............................................................................................4

4.1 Assemble the tripod to the balance.................................................................................4

4.2 Assemble the display unit to the tripod...........................................................................5

EOB-A01 EOB-A01N

Suitable only for medical balances

with platform size up to 310 x 300

mm.

Only suitable for non–medical

balances with platform size up to

310 x 300 mm.

1 Technical data

KERN EOB-A01 EOB-A01N

Net weight 1150 g 1645 g

Tripod height 450 mm 450 mm

EOB-A01-A01N-IA-e-1310 3

2 Scope of delivery

EOB-A01 EOB-A01N

1. Tripod

2. Fastening screws

3. Turning knobs for assembly display unit

4. Support screw

1. Tripod

2. Fastening screws

3. Turning knobs for assembly display unit

4. Support screw (already assembled)

5. Rubber cover

3 Assembly EOB-A01

3.1 Assemble the tripod to the balance

Example:

(Figure approximately)

Fasten the tripod acc. to illustration with

the 4 screws on the lower side of the

platform.

Observe that during screwing

down not too much pressure is performed

on the weighing pan.

4 EOB-A01-A01N-IA-e-1310

(Figure approximately)

Turn-in support screws for stabilisation at

the lower side of the tripod.

3.2 Assemble the display unit to the tripod

Secure the display unit with the two

black rotary knobs to the tripod

according to illustration.

Position display unit with the rotary

knobs.

4 Assembly EOB-A01N

4.1 Assemble the tripod to the balance

Fasten the tripod acc. to illustration with

the 4 screws on the lower side of the

platform.

Observe that during screwing

down not too much pressure is performed

on the weighing pan.

EOB-A01-A01N-IA-e-1310 5

Adapt the rubber cover in the provided

opening at the lower side of the tripod.

Unscrew the support screw until the

balance is in a stable and horizontal

position.

4.2 Assemble the display unit to the tripod

Secure the display unit with the two

black rotary knobs to the tripod

according to illustration.

Position display unit with the rotary

knobs.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Escala de KERN

Manuales populares de Escala de otras marcas

AWS

AWS ZEO-50 Manual de usuario

Gima

Gima Glass Body Fat Analyzer Manual de lista de piezas

Seca

Seca 374 Manual de usuario

TEC

TEC TEC SL59 SERIES Manual de usuario

Axis

Axis B/E Series Manual de usuario

Alecto

Alecto ACW-40 Manual de usuario

Rice Lake

Rice Lake MSI-4260 IS Manual de usuario

IKA

IKA RCT basic safety control Manual de usuario

ADE

ADE M20011 Manual de usuario

Duronic

Duronic KS3000 Manual de usuario

Digi

Digi SM-720 Manual de usuario

Cardinal

Cardinal CS Series Manual de usuario

Korona

Korona Kastella Manual de usuario

A&D

A&D FC-50Ki Manual de usuario

BDA

BDA CAMARGUE Manual de usuario

Tanita

Tanita HD-357 Manual de usuario

Leifheit

Leifheit 03173 Manual de usuario

Lumme

Lumme LU-1340 Manual de usuario