Kenwood NEXEDGE NX-210 Manual de usuario
© B62-2152-00 (K2)
09 08 07 06 05 04 03 02 01 00
NX-210
VHF DIGITAL TRANSCEIVER
INSTRUCTION MANUAL
ÉMETTEUR-RÉCEPTEUR NUMÉRIQUE VHF
MODE D’EMPLOI
TRANSCEPTOR DIGITAL VHF
MANUAL DE INSTRUCCIONES
VHF DIGITAL TRANSCEIVER
NX-210
INSTRUCTION MANUAL
ENGLISH
Terminal Descriptions
Universal connector
It is possible to use a resin-based cover for the Universal connector.
NO. Name Description Impedance I/O
1 SSW Ext/Int Speaker Switch Input High Impedance I
2 SP+ BTL Output + for External Speaker
8 Ω/ 16 Ω
O
3 SP- BTL Output - for External Speaker O
4 MSW Ext/Int MIC Switch Input High Impedance I
5 EMC External MIC Input 1.8 kΩ I
6 ME External MIC GND GND -
7 PTT External PTT Input High Impedance I
8 PF Programable Function Key Input High Impedance I
9 OPT Man Down Input High Impedance I
10 E GND GND -
11 5V 5V power supply output 5V O
12 TXD Serial Data Output CMOS O
13 RXD Serial Data Input CMOS I
14 NC Not used - -
Antenna Terminal
50 Ω impedance
Battery Terminal
The battery terminal uses a spring plate.
The negative terminal connects to the chassis ground.
The battery is mounted on the rear side of the transceiver using a sliding
mounting method.
Thank You
We are grateful you have chosen Kenwood for your land
mobile radio applications.
This instruction manual covers only the basic operations of your
NEXEDGE portable radio. Ask your dealer for information on any
customized features they may have added to your radio.
nXDn™
NXDN™ is a protocol name for a new digital communications
system using 4-level FSK technology which has been
co-developed by Kenwood and Icom.
noTices To The user
◆Government law prohibits the operation of unlicensed radio
transmitters within the territories under government control.
◆ Illegaloperationispunishablebyneand/orimprisonment.
◆ Referservicetoqualiedtechniciansonly.
SAFETY: It is important that the operator is aware of and
understands hazards common to the operation of any
transceiver.
The AMBE+2TM voice coding Technology embodied in this product
is protected by intellectual property rights including patent rights,
copyrights and trade secrets of Digital Voice Systems, Inc. This
voice coding Technology is licensed solely for use within this
Communications Equipment. The user of this Technology is
explicitly prohibited from attempting to extract, remove, decompile,
reverse engineer, or disassemble the Object Code, or in any other
way convert the Object Code into a human-readable form. U.S.
Patent Nos. #5,870,405, #5,826,222, #5,754,974, #5,701,390,
#5,715,365, #5,649,050, #5,630,011, #5,581,656, #5,517,511,
#5,491,772, #5,247,579, #5,226,084 and #5,195,166.
i
One or more of the following statements may be applicable:
FCC WARNING
This equipment generates or uses radio frequency energy.
INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY
THE FCC
user is encouraged to try to correct the interference by one or more of
•
•
•
•
ii
Kenwood
Kenwood
Kenwood
Kenwood
Kenwood
Kenwood
Kenwood
Kenwood
Kenwood
iii
Precautions
Kenwood.
touch the damaged parts.
accessories.
Turn the transceiver power off in the following locations:
Turn the transceiver power off in the following locations,
unless the model is specifically qualified for such use
(Intrinsically Safe such as approved by Factory Mutual, CSA):
Kenwood
in your area.
conditions.
information concerning the battery Pack
• Do not disassemble or reconstruct battery!
• Do not short-circuit the battery!
objects to heat up.
• Do not incinerate or apply heat to the battery!
• Do not use or leave the battery near fires, stoves, or other
heat generators (areas reaching over 80°C/ 176°F)!
• Avoid immersing the battery in water or getting it wet by
other means!
• Do not charge the battery near fires or under direct
sunlight!
• Use only the specified charger and observe charging
requirements!
• Do not pierce the battery with any object, strike it with an
instrument, or step on it!
• Do not jar or throw the battery!
reaction may occur.
• Do not use the battery pack if it is damaged in any way!
• Do not solder directly onto the battery!
• Do not reverse the battery polarity (and terminals)!
Otros manuales para NEXEDGE NX-210
2
Tabla de contenidos
Otros manuales de Transceptor de Kenwood
Kenwood
Kenwood TM-281A Manual de usuario
Kenwood
Kenwood TM-401A Manual de usuario
Kenwood
Kenwood NEXEDGE NX-411 Manual de usuario
Kenwood
Kenwood TK-2306 Manual de usuario
Kenwood
Kenwood TH-22A Manual de usuario
Kenwood
Kenwood TK-2212 Manual de usuario
Kenwood
Kenwood TS-700A Manual de usuario
Kenwood
Kenwood TK-7302 Manual de usuario
Kenwood
Kenwood ProTalk Digital TK-3401DE Manual de usuario
Kenwood
Kenwood TS-120S Manual de usuario
Kenwood
Kenwood TR-7400A Manual de usuario
Kenwood
Kenwood TS-900 Manual de usuario
Kenwood
Kenwood TK-7160 Manual de usuario
Kenwood
Kenwood TS-820 Manual de usuario
Kenwood
Kenwood TM-221A Manual de usuario
Kenwood
Kenwood NX-5900 Manual de usuario
Kenwood
Kenwood TS-2000 Manual
Kenwood
Kenwood NEXEDGE NX-410 Manual de usuario
Kenwood
Kenwood TR-751A Manual de usuario
Kenwood
Kenwood TS-515 Manual de usuario
