Kemppi MasterMig 353 Manual de usuario
MasterMig 353, 355
Operating manual- EN
MasterMig 353, 355
© Kemppi 11921960 / 2217
MasterMig 353, 355
Operating manual- EN
CONTENTS
1. General 4
1.1 Equipment description 6
1.2 MasterMig device 7
1.2.1 Wire feed mechanism 8
1.3 MasterMig Cooler cooling unit (optional) 10
2. Installation 11
2.1 Installing power source mains plug 12
2.2 Installing cooling unit (optional) 13
2.3 Installing equipment on cart (optional) 15
2.4 Connecting welding gun 17
2.5 Connecting earth return cable 18
2.6 Installing remote control (optional) 19
2.7 Installing and changing wire 20
2.8 Installing and replacing feed rolls 25
2.9 Installing and replacing wire guide tubes 27
2.10 Installing gas bottle and testing gas flow 28
3. Operation 30
3.1 Preparing welding system for use 31
3.1.1 Filling cooler and circulating coolant 31
3.2 Calibrating welding cable 33
3.3 Using control panel 34
3.3.1 Control panel: Main view 35
3.3.2 Control panel: Memory channels 37
3.3.3 Control panel: Welding process 37
3.3.4 Control panel: Trigger logic 38
3.3.5 Control panel: Weld Assist 39
3.3.6 Control panel: Welding parameters 40
3.3.7 Control panel: System settings 42
3.3.8 Control panel: Weld data 44
3.4 Additional guidance to functions and features 45
3.4.1 1-MIG 45
3.4.2 Pulse welding 45
3.4.3 MAX Cool process 45
3.4.4 MAX Position process 46
3.4.5 MAX Speed process 46
3.4.6 Trigger logic functions 47
3.4.7 WiseFusion feature 48
© Kemppi 21921960 / 2217
MasterMig 353, 355
Operating manual- EN
3.4.8 WeldEye with DCM (optional) 48
3.5 Using remote control 50
3.6 Changing welding polarity 51
3.7 Lifting MasterMig equipment 52
4. Maintenance 53
4.1 Daily maintenance 54
4.2 Periodic maintenance 55
4.3 Service workshops 56
4.4 Troubleshooting 57
4.5 Error codes 59
4.6 Installing and cleaning power source air filter (optional) 61
4.7 Disposal 63
5. Technical data 64
5.1 MasterMig devices 65
5.2 MasterMig cooling unit 69
5.3 Wire feeder consumables 70
5.4 MasterMig ordering info 72
© Kemppi 31921960 / 2217
MasterMig 353, 355
Operating manual- EN
1. GENERAL
These instructions describe the use of Kemppi's MasterMig welding equipment designed for light- to medium-duty pro-
fessional use in MIG/MAG welding.
MasterMig welding machines include both manual and automatic welding processes. Pulse welding is possible with the
MasterMig 355 series machines.
MasterMig series:
MasterMig product series MasterMig device model
MasterMig 353 MasterMig 353 G
MasterMig 353 GM
MasterMig 355 MasterMig 355 G
MasterMig 355 GM
MasterMig is designed to be used together with Kemppi's Flexlite GX MIG welding guns with euro connector.
MasterMig can be used also for TIG * and MMA ** welding.
* TIG welding requires the use of a dedicated Flexlite TX TIG torch with euro connector.
** MMAwelding requires a dedicated DIX-euro adapter.
Important notes
Read the instructions through carefully. For your own safety, and that of your working environment, pay particular atten-
tion to the safety instructions delivered with the equipment.
Items in the manual that require particular attention in order to minimize damage and harm are indicated with the
below symbols. Read these sections carefully and follow their instructions.
Note: Gives the user a useful piece of information.
Caution: Describes a situation that may result in damage to the equipment or system.
Warning: Describes a potentially dangerous situation. If not avoided, it will result in personal damage or fatal injury.
© Kemppi 41921960 / 2217
MasterMig 353, 355
Operating manual- EN
Kemppi symbols: Userdoc.
DISCLAIMER
While every effort has been made to ensure that the information contained in this guide is accurate and com-
plete, no liability can be accepted for any errors or omissions. Kemppi reserves the right to change the spe-
cification of the product described at any time without prior notice. Do not copy, record, reproduce or transmit
the contents of this guide without prior permission from Kemppi.
© Kemppi 51921960 / 2217
MasterMig 353, 355
Operating manual- EN
1.1 Equipment description
MasterMig device models (350 A)
•MasterMig 353 G
>> Generator-compatible
>> Standard device with automatic 1-MIG process
•MasterMig 353 GM
>> Generator-compatible and multi-voltage
>> Standard device with automatic 1-MIG process
•MasterMig 355 G
>> Generator-compatible
>> Pulse device with automatic 1-MIG and pulse processes. Advanced MAX processes as optional.
•MasterMig 355 GM
>> Generator-compatible and multi-voltage
>> Pulse device with automatic 1-MIG and pulse processes. Advanced MAX processes as optional.
All MasterMig device models have a 4-roll wire feed mechanism with the maximum wire spool diameter of 300 mm.
For the MasterMig device part descriptions, refer to "MasterMig device" on the next page.
MasterMig control panels
•Color LCD display
MasterMig cooling units
•MasterMig Cooler
•MasterMig Cooler M (multi-voltage).
For the cooling unit part descriptions, refer to "MasterMig Cooler cooling unit (optional)" on page10.
MIG welding guns
•Flexlite GX welding guns with euro connector.
For more information on the Flexlite GX welding guns, refer to Kemppi Userdoc.
Subfeeders
Subfeeder support can be added with a separate installation kit (contact your Kemppi dealer / service workshop for
more information).
•SuperSnake GTX subfeeder.
For more information on the SuperSnake GTX subfeeder, refer to Kemppi Userdoc.
Optional accessories
•4-wheel carts
•2-wheel carts
•Remote control HR40 (2-knob control)
•Remote control HR43 (1-knob control)
•Power source air filter
•Wire feed cabinet heater.
For more information on optional accessories, contact your local Kemppi dealer.
© Kemppi 61921960 / 2217
MasterMig 353, 355
Operating manual- EN
1.2 MasterMig device
Front
1. Transportation handle (also for mechanical lifting when the device is not installed on a cooling unit or cart)
2. Control panel
3. Work lights ON/OFF
4. Work light
5. Control cable connector
6. Earth return cable connector
7. Welding cable euro connector
8. Front locking interface
>> For locking on top of the cooling unit or on the cart
9. Connector for subfeeder synchronization kit (optional)
10. Wire feed cabinet hatch.
Rear
1. Shielding gas hose connector
2. Mains cable
© Kemppi 71921960 / 2217
MasterMig 353, 355
Operating manual- EN
3. Power switch
4. Rear locking interface
>> For locking on top of the cooling unit or on the cart.
Inside wire feed cabinet
1. Gas regulating valve (MasterMig 355)
>> For setting the gas flow rate in the device lower than the gas flow rate from the gas supply
2. USB connector
3. Polarity terminals
4. Wire inch button
>> Drive the filler wire forward (with arc off)
5. Gas test button
>> Test the shielding gas flow and flush the gas line
6. Wire feed mechanism (refer to "Wire feed mechanism" below)
7. Wire spool.
1.2.1 Wire feed mechanism
1. Drive rolls and drive roll mounting caps
2. Middle guide tube locking clip
3. Middle guide tube
4. Inlet guide tube
5. Pressure handles
6. Pressure rolls and pressure roll mounting pins
7. Pressure roll locking arms
8. Outlet guide tube.
© Kemppi 81921960 / 2217
MasterMig 353, 355
Operating manual- EN
1.3 MasterMig Cooler cooling unit (optional)
Front
1. Cooler container cap
2. Cooling liquid level indicator
3. Cooling liquid circulation button
>> Keeping the button pressed activates the pump and circulates the cooling liquid throughout the system. Once
released, the pump stops.
4. Front locking interface
>> For locking on the cart
5. Front locking interface
>> For locking to the power source
6. Coolant inlet connector (red)
7. Coolant outlet connector (blue).
Rear
1. Rear locking interface
>> For locking to the power source
2. Rear locking interface
>> For locking on the cart.
© Kemppi 10 1921960 / 2217
Este manual sirve para los siguientes modelos
5
Tabla de contenidos
Otros manuales de Sistema de soldadura de Kemppi
Kemppi
Kemppi Kempomat 2500 Manual de usuario
Kemppi
Kemppi MasterTig MLS 2300 ACDC Manual de usuario
Kemppi
Kemppi HiArc S 140 Manual de usuario
Kemppi
Kemppi WELDFORCE KPS 3500 Manual de usuario
Kemppi
Kemppi KEMPOWELD WIRE 400 Manual de usuario
Kemppi
Kemppi WELDFORCE KWF 200S Manual de usuario
Kemppi
Kemppi FastMig M Series Manual de usuario
Kemppi
Kemppi FastMig MXP 37 Pipe Steel Manual de usuario
Kemppi
Kemppi M 420 Manual de usuario
Kemppi
Kemppi Kempact MIG 2530 Manual de usuario
Kemppi
Kemppi FastMig MSF 53 Manual de usuario
Kemppi
Kemppi MasterTig LT 250 Manual de usuario
Kemppi
Kemppi MasterTig 235ACDC GM Manual de usuario
Kemppi
Kemppi 3200 Manual de usuario
Kemppi
Kemppi PROMIG EVOLUTION 511 Manual de usuario
Kemppi
Kemppi KMS 300 Manual de usuario
Kemppi
Kemppi Kempomat 2500 Manual de usuario
Kemppi
Kemppi PRO EVOLUTION MXE Manual de usuario
Kemppi
Kemppi KEMPOTIG 4500 Manual de usuario
Kemppi
Kemppi X5 FastMig Series Manual de usuario
Manuales populares de Sistema de soldadura de otras marcas
TAFA
TAFA 30*8B35 Manual de usuario
Lincoln Electric
Lincoln Electric INVERTEC V350-PRO CE Manual de usuario
ESAB
ESAB Buddy Arc 145 Manual de usuario
CIGWELD
CIGWELD 636804 Guía rápida
Red-D-Arc
Red-D-Arc DC-400 Manual de usuario
Hobart Welding Products
Hobart Welding Products Spool Gun DP 3035-10 Manual de usuario
