Kelly KLS4840D Manual de usuario

Kelly KLS-D Brushless Motor Controller User’s Manual V1.5.02

Kelly KLS-D Brushless Motor

Controller User’s Manual

Devices Supported:

Rev.1.5.02

October.2015

KLS4840D

KLS7240D

KLS4850D

KLS7250D

KLS6040D

KLS7275D

KLS6050D

Kelly KLS-D Brushless Motor Controller User’s Manual V1.5.02

Contents

Chapter 1 Introduction..............................................................................................2

1.1 Overview.............................................................................................................................. 2

Chapter 2 Features and Specifications................................................................. 3

2.1 General functions............................................................................................................... 3

2.2 Features............................................................................................................................... 4

2.3 Specifications...................................................................................................................... 5

2.4 Name Regulation................................................................................................................5

Chapter 3 Wiring and Installation........................................................................... 6

3.1 Mounting the Controller..................................................................................................... 6

3.2 Connections........................................................................................................................ 7

3.3 Installation Check List......................................................................................................11

Chapter 4 Programmable Parameters................................................................ 12

4.1 Step 1................................................................................................................................. 12

4.2 Step 2................................................................................................................................. 16

4.3 Step 3................................................................................................................................. 17

Chapter 5 Maintenance..........................................................................................18

5.1 Cleaning.............................................................................................................................18

5.2 Configuration.....................................................................................................................19

Table 1: ERROR CODES......................................................................................... 20

Contact Us:..................................................................................................................21

Kelly KLS-D Brushless Motor Controller User’s Manual V 1.5.02

Chapter 1 Introduction

1.1 Overview

This manual introduces the Kelly sinusoidal wave brushless BLDC motor controllers’

features, their installation and their maintenance. Read the manual carefully and thoroughly

before using the controller. If you have any questions, please contact the support center of Kelly

Controls, LLC.

Kelly ’s programmable motor controllers provide efficient, smooth and quiet controls for

electric motorcycles, golf carts and go-carts, as well as industrial motor control. It is mainly

supposed to solve noise problems of BLDC motor driving application. The KLS-D motor

controller must be based on hall sensors type.KLS-D controller can not support sensorless

brushess motor for now.Compared to the traditional trapezoidal waveform control technology,

this technique based on sinusoidal wave driving technology to reduce the operation noise and

1/3 switching loss, which well meets the noise reduction and efficiency requirements in the

application of DC brushless motor. It uses high power MOSFET’s and, SVPWM and FOC to

achieve efficiencies of up to 99% in most cases. A powerful microprocessor brings in

comprehensive and precise control to the controllers. It also allows users to adjust parameters,

conduct tests, and obtain diagnostic information quickly and easily.People can program the KLS

controller on PC software and Android App.There is one more choice for customers to program

KLS controller now.The APP software is based on Tablet with Android OS.Customers may add a

Z-TEK USB to RS232 cable for programming KLS controller if they want to use Android Tablet.

Both PC software and Android APP can provide one screen to monitor the controller

parameters.Sometimes people can use a small Android Tablet as display device.

KLS-D has a friendly I/O terminals for customers to hook up the batteries and motor easily.

Kelly KLS-D Brushless Motor Controller User’s Manual V 1.5.02

Chapter 2 Features and Specifications

2.1 General functions

(1) Extended fault detection and protection. Customers can read the error code in PC software

or Android Tablet also.

(2) Monitoring battery voltage. It will stop driving if the battery voltage is too high and it will

progressively cut back motor drive power as battery voltage drops until it cuts out

altogether at the preset “Low Battery Voltage”setting.

(3) Built-in current loop and over current protection.

(4) Configurable motor temperature protection range.

(5) Current cutback at low temperature and high temperature to protect battery and controller.

The current begins to ramp down at 90℃case temperature, shutting down at 100℃.

(6) The controller keeps monitoring battery recharging voltage during regen braking.

(7) Maximum reverse speed and forward speed can be configured between 20% and 100%

respectively and separately.

(8) A 4pin connector to RS232 port and a Z-TEK USB to RS232 cable allows for configuration,

programming and software upgrades using the tablet which must be based on Android OS

now.People can do the same things on PC software by using a standard USB to RS232

cable instead.

(9) Provision of a +5 volt and +12 volt output to supply various kinds of hall sensors.

(10) 5 switch inputs which are activated by connection to 12V. Default to throttle switch, brake

switch,reversing switch,forward switch and Boost switch.

(11) 2 analog 0-5V inputs that default to throttle input, and motor temperature input

(12) Copy signal of one of hall sensors.

(13) Configurable boost switch. Enables the maximum output power achievable if the switch is

turned on.

(14) 12V brake switch input used different port from motor temperature sensor.You can use

both brake switch and motor temperature sensor functions at the same time on the latest

version.Pin 25 is 12V brake switch input port.Pin1 is motor temperature sensor input port.

(15) Optional joystick throttle. A bi-symmetrical 0-5V signal for both forward and reversing.

(16) Configurable motor over-temperature detection and protection with the recommended

thermistor KTY84-130 or KTY84-150.

(17) 3 hall position sensor inputs. Open collector, pull up provided.

(18) Enhanced regen brake function. A novel ABS technique provides powerful and smooth

regen.The regen can happen at any speeds until zero speed.

(19) KLS-D controller included the fuse and shunt on the case.

(20) Cruise control.

(21) KLS-D can support Broadcast type CAN Bus function.It is 250Kbps.CAN bus is not

included in KLS-D controller by default.

Caution! The regen is not a safe function.Usually you may use the mechanical brake.

Kelly KLS-D Brushless Motor Controller User’s Manual V 1.5.02

2.2 Features

1) Intelligence with powerful microprocessor.

2) Synchronous rectification, ultra low drop, fast SVPWM and FOC to achieve very high

efficiency.

3) Electronic reversing.

4) Voltage monitoring on 3 motor phases, bus, and power supply.

5) Voltage monitoring on voltage source 12V and 5V.

6) Current sense on all 3 motor phases.

7) Current control loop.

8) Hardware over current protection.

9) Hardware over voltage protection.

10) Configurable limit for motor current and battery current.

11) Low EMC.

12) Battery protection: current cutback, warning and shutdown at configurable high and low

battery voltage.

13) Rugged aluminum housing for maximum heat dissipation and harsh environment.

14) Rugged high current terminals, and rugged aviation connectors for small signal.

15) Thermal protection: current cut back, warning and shutdown on high temperature.

16) Configurable 60 degree or 120 degree hall position sensors.Controller can do

auto_Identification angle for different degrees of hall sensors.

17) Configurable high pedal protection: the controller will not work if high throttle is detected at

power on.

18) Current multiplication: Take less current from battery, output more current to motor.

19) Easy installation: 3-wire potentiometer will work.

20) Standard PC/Laptop computer to do programming.There is one more choice for customers

to program KLS controller.Standard Tablet with Android OS to do programming.Need a

Z-TEK USB TO RS232 cable for connecting the controller to App program in Tablet.

21) User program provided. Easy to use. No cost to customers.

22) Support motors with any number of poles.

23) Up to 70,000 electric RPM standard. (Electric RPM = mechanical RPM * motor pole

pairs;Motor pole pairs=Motor poles/2).

Kelly KLS-D Brushless Motor Controller User’s Manual V 1.5.02

2.3 Specifications

•Frequency of Operation: 20kHz.

•Standby Battery Current: < 0.5mA.

•5V or 12V Sensor Supply Current: 40mA.

•Controller supply voltage range: PWR, 18V to 90V for controllers rated equal or lower than

72V.

•Supply Current, PWR, 30mA Typical.

•Configurable battery voltage range, B+. Max operating range: 18V to 1.25*Nominal Voltage.

•Standard Throttle Input: 0-5 Volts(3-wire resistive pot), 1-4 Volts(hall active throttle).

•Throttle Input: 0-5 Volts. Can use 3-wire pot to produce 0-5V signal.

•Main Contactor Coil Driver<2A.

•Full Power Operating Temperature Range: 0℃to 70℃(MOSFET temperature).

•Operating Temperature Range: -40℃to 100℃(MOSFET temperature).

•Max Battery Current :Configurable.

2.4 Name Regulation

The name regulation of Kelly BLDC motor controllers:

KLS 72 50D

KLS:Kelly BLDC motor controller based on sinusoidal waveform which is supposed to

work with BLDC motor with three hall sensors.

72:72V batteries

50:The matched motor is 72V 5KW BLDC motor with hall sensors.

D:The motor Power is＞4KW; S:The motor power ≤4KW

Kelly KLSD Brushless Motor Controller

Model

10 seconds

Current(Amp)

Continuous

Current(Amp)

Voltage(Volt)

KLS4840D

350

140

24-48

KLS4850D

400

160

24-48

KLS6040D

350

140

24-60

KLS6050D

400

160

24-60

KLS7240D

350

140

24-72

KLS7250D

400

160

24-72

KLS7275D

500

200

24-72

1.48V model: range of the batteries is 24V-48V.

2.60V model: range of the batteries is 24V-60V.

Kelly KLS-D Brushless Motor Controller User’s Manual V 1.5.02

3.72V model: range of the batteries is 24V-72V.

Chapter 3 Wiring and Installation

3.1 Mounting the Controller

The controller can be oriented in any position which should be as clean and dry as possible,

and if necessary, shielded with a cover to protect it from water and contaminants.

To ensure full rated output power, the controller should be fastened to a clean, flat metal

surface with four screws. Applying silicon grease or some other thermal conductive material to

contact surface will enhance thermal performance.

Proper heat sinking and airflow are vital to achieve the full power capability of the controller.

The case outline and mounting holes’ dimensions are shown in Figure 1.

Figure 1:KLSD mounting holes’ dimensions (dimensions in millimeters)

Kelly KLS-D Brushless Motor Controller User’s Manual V 1.5.02

3.2 Connections

3.2.1 Pin definition of KLS-D Controller

Figure 2: waterproof connector

DJ7091Y-2.3-11 Pin Definition

(14) REV_SW: Reverse switch input. Orange

(6) RTN: Signal return or power supply return. Black

(12) FWD: Forward switch White

(11) 12V:12V Source Red

(25) 12V brake switch. Yellowish

(9) Relay: Main contactor driver. Blue

(33)CAN-H:Green

(7) PWR: Controller power supply (input). Pink

Kelly KLS-D Brushless Motor Controller User’s Manual V 1.5.02

(34)CAN-L:Dark Gray

DJ7091Y-2.3-21 Pin Definition

(15) Micro_SW: Throttle switch input. Gray

(3) Throttle: Throttle analog input, 0-5V. Dark Green

(1) Temp: Motor temperature sensor input. Raddle.

(20) RTN: Signal return. Black

(8) Meter: Copy signal of hall sensors. Dark Blue

(4) 5V: 5V supply output, <40mA. Purple

(2) BOOST: Boost function. Brown

DJ7061Y-2.3-21 Pin Definition

(21) RTN:Signal return. Black

(5) 5V: 5V supply output,<40mA.Purple

(18) Hall A: Hall phase A. Yellow

(17) Hall B: Hall phase B. Dark Green

(16) Hall C: Hall phase C. Dark Blue

Notes:

1. All RTN pins are internally connected.

2. Meter function is to copy either of hall sensors.

3. Switch to 12V is active. Open switch is inactive.

Caution:

•Do not apply power until you are certain the controller wiring is correct and has been

double checked. Wiring faults will damage the controller.

•Ensure that the B- wiring is securely and properly connected before applying power.

•The preferred connection of the system contactor or circuit breaker is in series with the B+

line.

•All contactors or circuit breakers in the B+ line must have precharge resistors across their

contacts. Lack of even one of these precharge resistors may severely damage the controller

at switch-on.

Kelly KLS-D Brushless Motor Controller User’s Manual V 1.5.02

3.2.2 Standard Wiring of KLS-D Controller

Figure 3: KLS-D controller standard wiring

(Battery voltage can be used for controller supply)

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Controladores de Kelly

Kelly

Kelly KLS11111-8080N Manual de usuario

Kelly

Kelly Puma mini KLS-N Series Manual de usuario

Kelly

Kelly Jaguar KLS9650NE Manual de usuario

Kelly

Kelly KLS84150N Manual de usuario

Kelly

Kelly KLS6040S Manual de usuario

Kelly

Kelly KLS11401-8080N Manual de usuario

Kelly

Kelly Jaguar KLS8418N Manual de usuario

Kelly

Kelly KEB48200 Manual de usuario

Kelly

Kelly KBL24101X Manual de usuario

Kelly

Kelly KLS14801-8080N Manual de usuario

Kelly

Kelly KLS4812S Manual de usuario

Kelly

Kelly KDHE Series Manual de usuario

Kelly

Kelly KLS72501-8080N Manual de usuario

Kelly

Kelly MiniKLS7210NV Manual de usuario

Kelly

Kelly KLS8475N Manual de usuario

Kelly

Kelly SPM4812S Manual de usuario

Kelly

Kelly KLS8425RM Manual de usuario

Kelly

Kelly KDZ72650E Manual de usuario

Kelly

Kelly KBL24101 Manual de usuario

Kelly

Kelly KLS7212N Manual de usuario

Kelly

Kelly KLS7240ND Manual de usuario

Kelly

Kelly KLS6045H Manual de usuario

Kelly

Kelly KBS-X Series Manual de usuario

Kelly

Kelly KLS-S Manual de usuario

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario