Kargo Master 406SL Manual de usuario
Installation Guide
406SL
Kargo Master
Rancho Cordova, CA 95742
800-343-7486
CustomerService@KargoMaster.com
DATE: ______________
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 1
Install Instructions –406SL
*PLEASE READ ALL INSTRUCTIONS AND WARNINGS PRIOR TO ASSEMBLING,
INSTALLING, AND USING THIS PRODUCT*
Warning
Always check for wires, fuel tanks and lines, brake lines and other important vehicle
functionality items prior to drilling and installing all products.
Tools Needed
3/8” Wrench and Socket
7/16” Wrench and Socket
Table of Contents
Parts List ................................................................................................................................... 2
Hardware List ........................................................................................................................... 2
Step 1 Bolt Side Wings to Partition .......................................................................................... 3
Step 2 Bolt Top Wing to Partition ............................................................................................ 4
Step 3 Bolt Corner Supports .................................................................................................... 5
Step 4 Install into Van .............................................................................................................. 6
Before You Begin
•Have Large Partition (40651) assembled.
•Read all instructions.
•ENSURE SAFETY BEFORE ATTACHING SELF TAP BOLTS.
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 2
Install Instructions –406SL
Parts
Hardware
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 3
Install Instructions –406SL
Step 1 –Bolt Side Wings To Partition
•Place both passenger side wing (B) and
driver side wing (C) in orientation shown
with reference to the partition.
•Bolt together using a 1/4"-20 x .625”
flanged HH (1) and a 1/4”-20 flanged nyloc
nut (2).
•Repeat for a total of 4x on each panel.
•Leave bolts snug tight to allow movement until
partition is placed into vehicle.
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 4
Install Instructions –406SL
Step 2 –Bolt Top Wing to Partition
•Place top wing (A) and driver side wing (B) in orientation shown with reference to the
partition.
•Bolt together using a 1/4"-20 x .625” flanged HH (1) and a 1/4”-20 flanged nyloc nut (2).
•Repeat for a total of 6x.
•Snug Tighten
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 5
Install Instructions –406SL
Step 3 –Bolt Corner Supports
•Bolt corner supports (D&E) to connect the top wing (A) with bolt side wings (B&C).
•Bolt together using a 1/4"-20 x .625” flanged HH (1) and a 1/4”-20 flanged nyloc nut (2).
•Repeat for a total of 4x on each corner piece.
•Snug Tighten
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 6
Install Instructions –406SL
Step 4 –Install into Van
•Place partition with wings into van.
Have the wings orientated towards
the “B” pillars.
•Press firmly against the “B” pillars
and the support across the roof.
•Square the bottom of the partition.
•Tighten all bolts connecting wings
to partition.
•Install using self tapping hardware.
•Use the .75” hex bolt (3) along the
“B” pillars and across the roof.
•Use the 1.25” hex bolt (4) in floor.
GO BACK AND TIGHTEN
ALL BOLTS
YOUR INSTALLATION IS
NOW COMPLETE
Tabla de contenidos
Otros manuales de Rack y soporte de Kargo Master
Kargo Master
Kargo Master 40390 Manual de usuario
Kargo Master
Kargo Master 40960 Manual
Kargo Master
Kargo Master 48220 Manual de usuario
Kargo Master
Kargo Master 40240 Manual de usuario
Kargo Master
Kargo Master 4080L Manual
Kargo Master
Kargo Master 4A96L Manual
Kargo Master
Kargo Master 42000 Manual
Kargo Master
Kargo Master 4A83L Manual
Kargo Master
Kargo Master 40641 Manual de usuario
Kargo Master
Kargo Master 4A95M Manual de usuario
