5. Operation Controls and Functions
5.1 Transmitter Panel
4 / 7
Name Function Description
POWER LED Blue LED indicates that the Transmitter is powered on.
The OUTPUT LED lights in blue when the HDMI OUT port is
connected with display devices normally.
Used to switch the audio source (HDMI IN or LINE IN) for the
HDMI OUT port and the AUDIO OUT port.
Switch to "HDMI": The HDMI OUT port and the AUDIO OUT
port outputs the audio de-embedded from the HDMI IN port.
Switch to "LINE": The HDMI OUT port and the AUDIO OUT
port outputs the audio embedded from the LINE IN port (When
there is no signal input for the HDMI IN port, the HDMI OUT port
outputs black screen and the audio from LINE IN, and the
AUDIO OUT port outputs the audio from LINE IN).
▪ Light on: There is video signal input.
▪ Light off: There is no video signal input, or the system is powered off.
LINK LED
(Blue)
OUTPUT LED
(Blue)
INPUT LED
▪ Light on: Transmitter and Receiver are in good connection status.
▪ Light off: Transmitter and Receiver are not connected, or the
system is powered off.
No.
1
2
3
4
5
6
AUDIO DIP
switch
EDID DIP
switch
Used for EDID setting:
00- Copy RX HDMI OUT port sink EDID (as factory default)
01- Copy TX HDMI LOOP OUT port sink EDID
10- HDMI 1080p@60Hz, Audio 2ch PCM
11- HDMI 4K@60Hz 4:4:4, Audio 5.1ch PCM/DTS/DOLBY
SERVICE
HDMI
LINE
POWER LINK INPUT OUTPUT
EDIDAUDIO
TX
123 4 5 6 7
FLASHERRECEIVER
IRHDMI IN LINE INHDMI OUTCOAX OUT DC 12V
8910 11 12 1413
