KanexPro EXT-HDBASE70E Manual de usuario

EXT-HDBASE70E

4K UHD HDBaseT™ 70 Meter - HDMI® Extender

Version: EXT-HDBASE70E_2016V1.2

KANEXPRO EXT-HDBASE70E

2 | Page

Preface

Read this user manual carefully before using this product. Pictures displayed in this

manual are for reference only. Different models and specifications are subject to the

actual product.

This manual is only for operational instruction, not for any maintenance usage. The

functions described in this version are updated till Dec 2017. Any changes of functions

and parameters since then will be informed separately. Please refer to the dealers for

the latest details.

Trademarks

Product model and logo are trademarks. Any other trademarks mentioned in this

manual are acknowledged as the properties of the trademark owner. No part of this

publication may be copied or reproduced without the prior written consent.

FCC Statement

This equipment can generate, use, and radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. It has been tested and found to comply with the limits of a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a commercial

installation.

Operation of this equipment in a residential area is likely to cause interference, in which

case the user at their own expense will be required to take whatever measures may be

necessary to correct the interference

Any changes or modifications not expressly approved by the manufacture would void

the user’s authority to operate the equipment.

KANEXPRO EXT-HDBASE70E

SAFETY PRECAUTIONS

To ensure the best from the product, please read all instructions carefully before using

the device. Save this manual for further reference.

Unpack the equipment carefully and save the original box and packing material for

potential future shipment.

Follow basic safety precautions to reduce the risk of fire, electrical shock and injury

to persons.

Do not dismantle the housing or modify the module. It may result in electrical shock

or burn.

Using supplies or parts not meeting the products’ specifications may cause

damage, deterioration or malfunction.

Refer all servicing to qualified service personnel.

To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not

install this product near water.

Do not place any heavy items on the extension cable in case of extrusion.

Do not remove the housing of the device as opening or removing housing may

expose you to dangerous voltage or other hazards.

Install the device in a place with fine ventilation to avoid damage caused by

overheating.

Keep the module away from liquids.

Spillage into the housing may result in fire, electrical shock, or equipment damage.

If an object or liquid falls or spills on to the housing, unplug the module immediately.

Do not twist/pull by force the ends of the optical cable. It can cause malfunction.

Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power

cord to the device before cleaning.

Unplug the power cord when left unused for an extended period.

Information on disposal for scrapped devices: Do not burn or mix with general

household waste; please treat the devices as normal electrical waste.

KANEXPRO EXT-HDBASE70E

4 | Page

Contents

1. Introduction..................................................................................................................1

1.1 Introduction to HDBaseT Extender Set ..............................................................1

1.2 Features .............................................................................................................1

1.3 Package List.......................................................................................................1

2. Introduction of Product Appearance ............................................................................3

2.1 Appearance of HDBaseT Transmitter ................................................................3

2.2 Appearance of HDBaseT Receiver ....................................................................4

3. System Connection .....................................................................................................5

3.1 Usage Precautions .............................................................................................5

3.2 System Diagram.................................................................................................5

3.3 Connection Procedure .......................................................................................5

3.4 Application..........................................................................................................6

3.5 Twisted Pair Cable Connection ..........................................................................6

4. Specification ................................................................................................................7

4.1 Supported Resolution.........................................................................................8

5. Panel Drawing .............................................................................................................9

6. Troubleshooting & Maintenance ................................................................................10

7. After-sales Service.....................................................................................................11

8. Warranty…………………………………………………………………………………….12

KANEXPRO EXT-HDBASE70E

1. Introduction

1.1 Introduction to HDBaseT Extender Set

The KanexPro EXT-HDBASE70E is a 4K ready transmitter-receiver set made to extend

Ultra HD 4K, digital audio, wide-band IR and power over Ethernet (PoE) over a cost

effective cat6 cable. Supports computer resolutions up to 1920x1200, HD1080P/60 with

Deep Color. This HDCP compliant extender routes distances up to 230 feet using

HDBaseT™ Lite technology.

Ideal for digital signage applications or routing uncompressed HDMI A/V signals over

inexpensive CATx in boardrooms, conference rooms and classrooms for far-end

projectors.

1.2 Features

Extend uncompressed HDMI A/V signals over Single CAT6

Extend up to 70 meters (230 feet)

POE supported on the receiver side

Supports 4K UHD resolutions

Supports HDMI 1.4, 3D, and full HD 1080p/60

HDCP & EDID compliant

CEC Pass-through

Bi-directional IR control

High bandwidth up to 10.2 Gbps

Compatible with our HDMMX modular matrix switchers

One locking power supply included

Aluminum case enclosure with separate mounting ears

Ultra-compact receivers are easy to install and hide behind the TV or

projector, putting the design as the top priority.

Note: Please use a CAT5e cable with low impedance (Shielded twisted pair will be

better and should be well grounded) for good transmission effect.

1.3 Package List

1 x HDBaseT Extender Set (including TX and RX)

KANEXPRO EXT-HDBASE70E

4 x detachable mounting ears

4 x screws

8 x plastic cushions

1 x power adapter (DC 12V 1A)

1 x user manual

Notes:Please confirm if the product and the accessories are all included, if not,

please contact with the dealers.

KANEXPRO EXT-HDBASE70E

2. Introduction of Product Appearance

2.1 Appearance of HDBaseT Transmitter

1) HDMI IN: Connect to HDMI source.

2) IR IN: Connect to an IR receiver, the IR signal received from this port can only

send out via HDBaseT Receiver.

3) IR OUT: Connect with IR emitter, the sent IR signals are received by HDBaseT

Receiver.

4) Power Indicator: illuminate when power up

5) DC 12V: Connect with power supply, energize both TX and RX (PoC solution)

synchronously.

6) TP OUT: Connect to the TP IN socket on the HDBaseT Receiver via CAT5e/ CAT6

cable.

KANEXPRO EXT-HDBASE70E

2.2 Appearance of HDBaseT Receiver

1) HDMI Out: Connect to HDMI display.

2) IR IN: Connect to an IR receiver, the IR signal received from this port can only

send out via HDBaseT Transmitter.

3) IR OUT: Connect with IR emitter, the sent IR signals are received by HDBaseT

Transmitter.

4) Power Indicator: illuminate when power up

5) TP IN: Connect to the HDBaseT port on the HDBaseT Transmitter via CAT5e/

CAT6 cable.

Note: HDBaseT Extender Set boasts 2 indicators to show real-time operation

information:

Indicator

Function

Details

Green

Show input signal

connection

Connected:

HDCP Compliant: Illuminate;

Not HDCP Compliant: Blink.

Disconnected: Off

Yellow

Indicate linking status of

the transmitter and the

receiver

Connected: Illuminate

Disconnected: Off

KANEXPRO EXT-HDBASE70E

3. System Connection

3.1 Usage Precautions

1) System should be installed in a clean environment and has a prop temperature and

humidity.

2) All of the power switches, plugs, sockets and power cords should be insulated and

safety.

3) All devices should be connected before power on.

4) The Cat5e/Cat6 terminations for HDBaseT devices should be a straight-thru

TIA/EIA T568B standard.

3.2 System Diagram

3.3 Connection Procedure

Step1.Connect HDMI source (such as Blue-ray DVD) to HDMI In port of the transmitter

with an HDMI cable.

Step2.Connect TP OUT port of the transmitter to TP IN port of the receiver through a

CAT5e/CAT6 cable.

Step3.Connect a HDMI displayer (such as HDTV) to HDMI Out port of the receiver

with HDMI cable.

Step4.When using the bi-directional IR control, do the following.

a) Connect the IR emitter at either end to the IR OUT port on either the

transmitter or the receiver.

b) When using a powered IR receiver, connect via a 3.5 mm stereo plug to

the IR IN on either the receiver or the transmitter.

Step5.Connect with DC 12V power adaptor to the power port of HDBaseT Transmitter,

HDBaseT Receiver will be energized synchronously with PoC solution.

HDTV

DVD

IR Remote

CAT5e/CAT6

Receiver

Transmitter

KANEXPRO EXT-HDBASE70E

3.4 Application

HDBaseT Extender Set has a good application in various occasions, such as computer

realm, monitoring, big screen displaying, meeting room, education and bank &

securities institution etc.

3.5 Twisted Pair Cable Connection

The Cat5e/Cat6 terminations for HDBaseT devices should be a straight thru

TIA/EIAT568B standard. TIA/EIA T568A standard is NOT recommended.

Note: To make a better transmission, cable connectors MUST be metallic, the shielded

layer of cable MUST be connected to the connector’s metal shell.

TIA/EIA T568A

TIA/EIA T568B

Cable color

green white

orange white

green

orange

orange white

green white

blue

blue white

orange

green

brown white

brown

1st

Ground

4--5

1st

Ground

4--5

2nd

Ground

3--6

2nd

Ground

1--2

3rd

Group

1--2

3rd

Group

3--6

4th

Group

7--8

4th

Group

7--8

Otros manuales para EXT-HDBASE70E

Tabla de contenidos

Otros manuales de Extensor de KanexPro

KanexPro

KanexPro EXT-HDMIKVM70M Manual de usuario

KanexPro

KanexPro WP-2X1HDUSBC Manual de usuario

KanexPro

KanexPro EXT-70SL18G Manual de usuario

KanexPro

KanexPro VGAEXTX1 Manual de usuario

KanexPro

KanexPro MPTP-T70S-H2 Manual de usuario

KanexPro

KanexPro EXT-HDBT70C Manual de usuario

KanexPro

KanexPro EXT-18GHDMIWL Manual de usuario

KanexPro

KanexPro EXT-4KFIBERPRO Manual de usuario

KanexPro

KanexPro HDBASE100ME Manual de usuario

KanexPro

KanexPro HDBASE70POE Manual de usuario

KanexPro

KanexPro HDBASE70POE Manual de usuario

KanexPro

KanexPro HDBASE70POE Manual de usuario

KanexPro

KanexPro EXT-HDBTKVM100 Manual de usuario

KanexPro

KanexPro EXT-HDBASE70E Manual de usuario

KanexPro

KanexPro EXT-USB2100M Manual de usuario

KanexPro

KanexPro EXT-100SL18G Manual de usuario

KanexPro

KanexPro HDEXT50M Manual de usuario

KanexPro

KanexPro HDBASE100POEL Manual de usuario

KanexPro

KanexPro EXT-HDBT70M Manual de usuario

KanexPro

KanexPro VGAEXTX2 Manual de usuario

KanexPro

KanexPro HDEXT50M Manual de usuario

KanexPro

KanexPro EXT-HDBT150M Manual de usuario

KanexPro

KanexPro HDBase100M Manual de usuario

KanexPro

KanexPro EXT-HD60M Manual de usuario

Manuales populares de Extensor de otras marcas

SY HDBT-60T Manual de usuario

Appsys ProAudio

Appsys ProAudio ADX-16 Manual de usuario

Atlona

Atlona RS232 Manual de usuario

IDK

IDK OPF-TH1000-A Manual de usuario

Enable-IT

Enable-IT 824WP Manual de usuario

Worx

Worx Landroid RadioLink WA0864 Hoja de especificaciones

TP-Link

TP-Link TL-WA730RE Manual de usuario

Camplex

Camplex CMX-HDMI-SFPL Manual de usuario

SC&T

SC&T HE03-4K Manual de usuario

Marmitek

Marmitek MegaView70 Manual de usuario

Samsung

Samsung SCS-26UC4 Manual de usuario

Foxun

Foxun SX-GES24 Manual de usuario

MuxLab

MuxLab 500771 Manual de usuario

foxunhd

foxunhd SX-AEX01 Manual de usuario

TERK Technologies

TERK Technologies LFIRX2 Manual de usuario

Devolo

Devolo Audio Extender Manual

Edimax

Edimax EW-7438RPn V2 Manual de usuario

Shinybow USA

Shinybow USA SB-6335T5 Manual de usuario