Kaiser Baas X400 Manual de usuario

Complete User Guide

Visit kaiserbaas.com for more information

PRODUCT DIAGRAMSAFETY PRECAUTIONS 01 - ENG

Before using your Kaiser Baas X400 Action Camera

please ensure you read and understand the

following product and safety precautions.

●DO NOT use the camera in water without

the waterproof case.

●Always check the waterproof case seal is

clean and free of debris prior to use in water.

●DO NOT attempt to open the camera or

modify it in any way. If the camera has been

opened the warranty

will be void. Maintenance and repairs should

only be performed by Kaiser Baas.

●DO NOT handle or charge the camera without

its waterproof case using wet hands.

Failure to observe this may result in damage to

camera and persons.

●ONLY recharge the camera battery using the

supplied USB cable.

●If using a wall charger, ensure that it is a

1. Power / Record / OK

POWER: HOLD 2 SECONDS

RECORD: CLICK 1 SECOND

OK: CLICK 1 SECOND

2. Menu / Mode / Scroll

POWER: HOLD 2 SECONDS

RECORD: CLICK 1 SECOND

OK: CLICK 1 SECOND

3. Micro SD Port

CONNECT TO YOUR PHONE

4. Micro HDMI

CONNECT TO YOUR SCREEN

5. Mini USB

CHARGING AND

DATA TRANSFER

6. Battery

QUICK RELEASE DOOR

TO ACCESS BATTERY

7. Tripod Thread

ATTACH TO TRIPOD &

OTHER ACCESSORIES

8. Microphone

ATTACH TO TRIPOD &

OTHER ACCESSORIES

1 2

6 7

certied product for your region. AC Input:

100-240VAC 50/60Hz. DC Output: 5V 1A.

Only use a USB wall charger with suitable

approval and certication. Do not charge in

conditions outside of the 10°C - 45°C range.

If you do not know the voltage and current of

your charger, use the included cable to charge

from your computer.

●The camera should not be used in heat

exceeding 55°C (131°F).

●DO NOT drop, crush, pierce, bend, deform,

microwave, incinerate or shoot the camera.

PRODUCT DIAGRAM GETTING STARTED

01 - ENG 01 - ENG

9. LENS

KEEP CLEAN FOR

CLEAR FOOTAGE

10. Mount Attachement

ATTACH TO TRIPOD

11.Case Latch

PULL TO OPEN

WATERPROOF CASING

12. Power / Record / OK

POWER: HOLD 2 SECONDS

RECORD: CLICK 1 SECOND

OK: CLICK 1 SECOND

13. Menu / Mode / Scroll

POWER: HOLD 2 SECONDS

RECORD: CLICK 1 SECOND

OK: CLICK 1 SECOND

12 13

Welcome to your new Kaiser Baas X400 Action

Camera. Before you get shooting, please review

the user guide carefully to ensure you get the

maximum performance out of your camera.

Battery Charging

We recommend that you fully charge your camera

before use. A full charge is approximately 2.5

hours using a 5V 0.5/1A Charger.

MicroSD Card Compatibility

Your camera requires a MicroSD Card

(not included).

Kaiser Baas recommends the use of a brand

name Class UHS-1 or higher MicroSD Card. Any

content recording higher than 1080P@60FPS will

require a Class UHS-1 or higher card.

There is only one correct way to insert the

MicroSD card. Do not force the card into the slot

as it may damage the camera and card.

The maximum card size is 64GB.

The list of recommended MicroSD cards can be

found at: www.kaiserbaas.com/support

Format Card

Before you start recording for the rst time, we

recommend you format the MicroSD card.

The format option is found in the Settings Menu.

For information on how to navigate the menu

please see the Menu Navigation section.

Note: Formatting the card will permanently erase

all data on the card. Be sure to backup any

content prior to formatting.

Firmware Update

Please check the www.kaiserbaas.com/support

page for the latest rmware on your camera. The

current rmware version can be found on the last

settings page.

GETTING STARTED VIDEO MODE

01 - ENG 01 - ENG

Power ON / OFF

To power ON your camera

1. Insert the battery into the camera.

2. Hold the power/toggle button for 2 seconds

until you see the Kaiser Baas logo appear.

Navigation

Navigate the menus and camera modes using

the 2 buttons found on your camera or by using

the touchscreen.

The front Menu/Toggle button cycles through the

cameras modes and settings. It can also be used

to go back/cancel any menu item.

The top Record/OK button will start/stop

recording video, capture photos and conrm/

select menu items.

The arrows on the LCD screen allow for quick

access to menus. Touch the arrows on the left to

open the Photo Scene Mode menu. The arrows

Modes

The X400 features 2 key modes; Video Mode

and Photo Mode.

Video Mode

The default mode is Video Mode.

Click the Record button to start recording.

There is 1 Indicator light on the back of the X400

Camera. Refer to the Camera Diagram for exact

placement. When recording, the status LED will

ash continuously.

Video Settings

Video Resolution: Your action camera can be

set to support an array of resolutions and frame

rates.

The higher the resolution the greater the detail

and clarity of footage. Higher frames-per-second

(FPS) capture more motion and appear smoother

on playback.

on the right open the Settings Menu. The arrows

on the bottom of the screen open WiFi, Sound

and Stabilisation shortcuts.

Select from these menus using the touchscreen

or with the buttons.

Resolution FPS

4K 3840x2160 30

2.7K 2720x1520 30

FHD 1920x1080 60/30

HD 1280x720 120/60/30

Note: Higher resolutions will become inactive

if the memory card is not Class 10 or higher.

Tip: Recording in higher resolutions/fps also

impacts battery life. Refer to the battery guide

for more tips on battery management.

VIDEO MODE VIDEO MODE

01 - ENG 01 - ENG

Image Stabilisation

This reduces shakiness and blur when shooting

video. When the mode is enabled an Anti-Shake

icon will appear in the video capture screen.

Loop Recording

This allows you to record continuously using

footage intervals of 2/3/5 minutes. The camera

will delete the oldest loop recording le and

replace with the latest recording when the

MicroSD is full.

Wind Noise Reduction

Enable this mode to reduce the amount of

noise from wind picked up by the camera’s

microphone.

Scene Mode

These are pre-set exposure modes that help

inexperienced photographers achieve the

proper automatic settings for a photo.

Date Stamp

Toggle Date Stamp On/O. Choose whether to

display Date or Date & Time.

Video Time Lapse

Time-lapse is a creative technique that records

footage at a very low frame rate. Playing it back

at a higher frame rate shows a rapid change

over time. This technique is most eective

when recording scenes or objects which have a

slow state of change, e.g. a sunset or a ower

blossoming.

This option captures video at specied intervals

without audio ready for playback and sharing.

Time lapse can be set to the following intervals

1/3/5/10/30/60 seconds.

The following chart is useful for determining the

amount of time required for 1min of footage

at 30fps:

Note: Time lapse mode must be turned o in

order to record normal or Slow-motion videos.

Max Time Lapse

Set the limit for time lapse recording. Video

will automatically stop after 5/10/15/20/30/60

minutes.

Note: Time lapse intervals when using Max Time

Lapse setting are dependant on the interval

chosen in Video Time lapse setting.

Slow Motion Movie

Select this mode to shoot slow motion videos at

720P 120FPS.

Slow Motion Movie mode and the 720P

120FPS resolution will not be available if Image

Stabilisation is active.

Interval Recording Time

0.5 15 mins

1 30 mins

3 1 hour

5 2.5 hours

10 5 hours

30 15 hours

60 30 hours

PHOTO MODE PHOTO MODE

01 - ENG 01 - ENG

To enter Photo Mode, click the Menu/Toggle

button once on the top of the camera, or touch

the arrows on the right of the LCD screen and

touch the Photo icon from the menu.

Click the Record/Conrm button to take a photo.

When capturing a photo, the blue status LED

will ash.

Photo Settings

Image Resolution

Resolution refers to the number of pixels in an

image. Resolution is sometimes identied by the

width and height of the image as well as the total

number of pixels in the image.

See the table for the X400 image resolution

options.

Photo Time Lapse

Time lapse Photo mode allows you to shoot a

continuous sequence of photos. This mode is

activated by clicking the Record/Conrm button

and will shoot automatically until stopped by

pressing the Record/Conrm button again.

Shoot in this mode with the following intervals

0.5/1/3/5/10/30/60 seconds.

Max Time Lapse

Set the limit for time lapse recording. Video

will automatically stop after 5/10/15/20/30/60

minutes.

Note: Time lapse intervals when using Max Time

Lapse setting dependant on the interval chosen

in Photo Time lapse setting.

Burst Mode

This setting lets you capture photos in a rapid fast

ring sequence.

MP Resolution

20 5120x3840

16 4640x3480

14 4320x3240

10 4320x2430

8 3840x2160

5 2592x1944

2 1920x1080

You can set the following intervals 3/1, 7/2, 15/4,

30/8 P/S (photos/second).

Note: Shooting in higher intervals requires some

time to save the images to the memory card.

The screen will be blacked out whilst shooting

and saving.

Self Timer

When this mode is enabled, it lets you set the

delay for when a single photo is taken after

clicking the Record/Conrm button.

3/5/10 second intervals are available.

Date Stamp

Toggle Date Stamp ON / OFF. Choose whether

to display Date or Date & Time.

Scene Mode

These are pre-set exposure modes that help

inexperienced photographers achieve the proper

automatic settings for a photo.

You can easily switch between modes for the

best picture under most circumstances.

Picture Quality

Set up your camera to shoot the best image

quality.

Metering Mode

There are each method estimates the exposure of

the scene by calculating light in dierent ways.

Centre, Average, Spot

Filter

Select to apply eects to images you capture.

Available eects are:

Black & White / Sepia / Vivid / Natural

/ Negative / Warm / Cold / Red / Green / Blue

White Balance

Manually control the white balance. Camera is set

to Auto by default.

Options include Auto, Daylight, Shade, Tungsten

Light, White Fluorescent.

PHOTO MODE EFFECTS

01 - ENG 01 - ENG

Manually control the exposure/amount of light the

camera records.

Intervals: -2 /-1 / +0.0 / +1.0 / +2.0

ISO

Manually control the ISO level the camera

captures footage at. The default option is Auto.

Note that the higher the ISO number the more

noise/grain will appear in your footage.

Interval options

Auto / 50 / 100 / 200 / 400 / 800 / 1600

Control

Adjust microphone, speaker and brightness

levels.

Sounds

Control/toggle sounds produced by the X400

ON / OFF. Shutter, Boot-up and Beep can be

toggled.

LDC

Lens Distortion Correction. Allows you to toggle

Distortion Correction ON / OFF.

FOV

Adjust the X400’s eld of view. Select Super

Wide/Wide/Medium/Narrow eld of view.

GENERAL SETTINGS GENERAL SETTINGS

01 - ENG 01 - ENG

Power Frequency

Default setting is 50hz. However, if you experi-

ence any light strobing in your footage you may

manually select 50/60hz.

WiFi

Toggle WiFi ON / OFF.

Date & Time

Set the correct date and time.

Screensaver

This setting lets you conserve power while

shooting. Toggle if/how long until the

screensaver comes on.

Select 1/3/5 minutes.

Auto Power O

This will power the camera o after a selected

period of inactivity.

Select 1/3/5 minutes.

Quick Record

Quick Record enables the ability to record auto-

matically when the camera is turned on.

USB Mode

You can choose between MSDC or Webcam

mode. In MSDC mode, you can access the les

on the SD card.

You can use X400 as a webcam as well. Please

note that the application you use on your

computer has to be compatible to this mode.

Reset WiFi Settings

This will allow you to reset your Wi-Fi settings to

default. Use this option if you have any issues

connecting with smartphone.

Language

Select your desired language here.

English French

German Spanish

Italian Chinese

Traditional Chinese Simplied Chinese

FORMAT CARD WIFI & PLAYBACK

01 - ENG 01 - ENG

Format Card

This option will format the MicroSD card. Recom-

mended prior to using any MicroSD that has been

used in other devices.

Note: Formatting the card will permanently erase

all data on the card. Be sure to backup any

content prior to formatting.

System

Allows you to reset the camera’s settings to

factory default, check the current installed

rmware version and monitor the capacity and

free space on the inserted Micro SD card.

Format Card

1. Download the KB X400 App from the Apple™

App Store™ or Google Play™ Store. (Visit

www.kaiserbaas.com/support for a direct link)

2. Switch on the WiFi from the Settings Menu.

3. Connect to the WiFi through your WiFi settings

page on your smartphone.

●WiFi ID: KB-X400

●WiFi Password: 1234567890

●Launch the KB X400 App and click connect.

5. You are now ready to use the App. Check

the KB website for new features and updates

to the App.

Playback

You can playback your footage on a PC or

Apple™ Mac computer/laptop.

Using the supplied USB cable, connect it to

your computer. Choose the MSDC option when

prompted on the camera. The camera will now

appear as an external device. You may also use

a MicroSD Card reader to view and playback les

directly without the camera.

HDTV Playback

To playback on a HDTV you will need a Micro

HDMI – HDMI Cable.

When connected, the HDTV will switch the

Camera LCD screen OFF and mirror the camera

screen instead.

The camera will only output up to 1920x1080i @

60fps via the Micro HDMI port.

BATTERY GUIDE BATTERY GUIDE

01 - ENG 01 - ENG

Only use Kaiser Baas ocial batteries with this

product. To charge the camera:

1. Insert the battery into the camera

2. Connect the USB Charging Cable to the Mini

USB port located on the camera.

3. Connect the USB Charging Cable to a

computer or wall charger.

Warning: If using a wall charger, ensure that it is a

certied product for your region. AC Input: 100-

240VAC 50/60Hz. DC Output: 5VDC 0.5A/1A.

Only use a USB charger with suitable approval

and certication. If you do not know the output

voltage/current of the charger use a computer to

charge the battery. Do not charge in conditions

outside of the 10°C-45°C range.

4. The camera status LED will be RED whilst

charging. Once charging is complete the status

LED light will switch OFF.

5. A full charge cycle will take approximately

2.5 hours by 0.5A/1A charger.

Battery Tips

To maximise battery life:

●Turn o WiFi.

●Turn on the Screen O function.

●Capture at a lower Video Resolution and

frame rate. Higher resolutions and frame

rates impact battery performance.

●Avoid exposing the camera and battery to

very cold or hot temperatures. Cold or hot

temperatures may temporarily aect the

battery life and cause the camera to stop

working.

●Only ever charge the camera with a compliant

wall charger marked 5V/1A

Adhere to these guidelines to ensure maximum

performance and longevity.

●Never use the camera in water without

the waterproof case. The camera is not

waterproof without the case.

●If camera has been used in salt water

ALWAYS rinse the waterproof case in fresh

water to prevent corrosion.

●Regularly check the seals for debris or dust

on the door of the waterproof case to prevent

water, sand and dirt ingress.

●Never handle the camera, battery or MicroSD

Card with wet hands or in wet conditions.

●Clean the camera lens and waterproof case

lens with a soft micro bre towel to reduce any

blurry footage due to grease/ngerprints.

Otros manuales para X400

Tabla de contenidos

Otros manuales de Cámara de acción de Kaiser Baas

Kaiser Baas

Kaiser Baas X1 Manual de usuario

Kaiser Baas

Kaiser Baas X150 Manual de usuario

Kaiser Baas

Kaiser Baas X90 Manual de usuario

Kaiser Baas

Kaiser Baas X80 Manual de usuario

Kaiser Baas

Kaiser Baas X2 Manual de usuario

Kaiser Baas

Kaiser Baas X90 Manual de usuario

Kaiser Baas

Kaiser Baas X350 Manual de usuario

Kaiser Baas

Kaiser Baas X2 Manual de usuario

Kaiser Baas

Kaiser Baas X200 Manual de usuario

Kaiser Baas

Kaiser Baas X220 Manual de usuario

Kaiser Baas

Kaiser Baas KBA12009 Manual de usuario

Kaiser Baas

Kaiser Baas X600 Manual de usuario

Kaiser Baas

Kaiser Baas X450 Manual de usuario

Kaiser Baas

Kaiser Baas X Limited Edition Manual de usuario

Kaiser Baas

Kaiser Baas X150 Manual de usuario

Kaiser Baas

Kaiser Baas X200 Manual de usuario

Kaiser Baas

Kaiser Baas X100 Manual de usuario

Kaiser Baas

Kaiser Baas X300 Manual de usuario

Kaiser Baas

Kaiser Baas X-BEAM Manual de usuario

Kaiser Baas

Kaiser Baas X650 Manual de usuario

Kaiser Baas

Kaiser Baas KBA12022 Manual de usuario

Kaiser Baas

Kaiser Baas X250 Manual de usuario

Kaiser Baas

Kaiser Baas X250 Manual de usuario

Kaiser Baas

Kaiser Baas PhotoMaker X4 Manual de usuario

Manuales populares de Cámara de acción de otras marcas

Epic

Epic STC-EPC1T Manual de usuario

Brinno

Brinno MAC200 DN Manual de usuario

GoPro

GoPro HERO5 Manual de usuario

ION

ION Air Pro 2 Manual de usuario

Firefly

Firefly 6s Manual de usuario

Omni

Omni HERO4 Manual de usuario

nedis

nedis ACAM41BK Manual de usuario

MOFILY

MOFILY YOCAM Manual de usuario

ZERO-X

ZERO-X ZX-10 Manual de usuario

Pyle

Pyle eXpo PSCHD90 Manual de usuario

Action Camera

Action Camera AC32 Manual de usuario

Midland

Midland XTC300 Manual de usuario

Movii

Movii QC-8075 Manual de usuario

Coleman

Coleman C5WP Xtreme Manual de usuario

MCM Electronics

MCM Electronics 82-19749 Manual de usuario

Aim

Aim SmartyCam 3 Sport Manual de usuario

Naxa

Naxa NDC-409 Manual de usuario

Panasonic

Panasonic HX-A1M Manual de usuario