JVC KD-R816 Manual de usuario
ENGLISH
GET0652-001A
[U/UH]
EN, TH 0110DTSMDTJEIN© 2010 Victor Company of Japan, Limited
For canceling the display demonstration, see page 4. /
CD RECEIVER /
KD-R816
INSTRUCTIONS
For installation and connections, refer to the separate manual.
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
CoverRear_KD-R816_001A_2.indd 1-2CoverRear_KD-R816_001A_2.indd 1-2 12/15/09 9:22:21 AM12/15/09 9:22:21 AM
2ENGLISH
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and
to obtain the best possible performance from the unit.
IMPORTANT FOR LASER PRODUCTS
1.CLASS 1 LASER PRODUCT
2.CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave
all servicing to qualified service personnel.
3.CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with
optical instruments.
4.REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
[European Union only]
Warning:
If you need to operate the unit while driving,
be sure to look around carefully or you may be
involved in a traffic accident.
For safety...
• Do not raise the volume level too much, as
this will block outside sounds, making driving
dangerous.
• Stop the car before performing any
complicated operations.
Temperature inside the car...
If you have parked the car for a long time in
hot or cold weather, wait until the temperature
in the car becomes normal before operating
the unit.
How to read this manual
The following icons/symbols are used to
indicate:
Press and hold the button(s)
until the desired operation
begins.
Turn the control dial.
Turn the control dial
to make a selection,
then press to confirm.
( XX) Reference page number
<XXXX> Menu setting item
Continued on the next page
[Hold]
EN02-09_KD-R816_001A_2.indd 2EN02-09_KD-R816_001A_2.indd 2 12/15/09 9:22:40 AM12/15/09 9:22:40 AM
3ENGLISH
How to attach/detach the control
panel
How to reset your unit
Your preset adjustments
will also be erased (except
the registered Bluetooth
device). ( 14)
How to forcibly eject a disc
• You can forcibly eject the loaded disc even
if the disc is locked. To lock/unlock the disc,
10.
• Be careful not to drop the disc when it ejects.
• If this does not work, reset your unit.
CONTENTS
2 How to read this manual
3 How to attach/detach the control
panel
3 How to reset your unit
3 How to forcibly eject a disc
4
Canceling the display
demonstration
4 Setting the clock
5 Preparing the remote controller
(RM-RK50)
6 Basic operations
8 Listening to the radio
10 Listening to a disc
11 Listening to the USB device
13 Using the Bluetooth® device
15 Using a Bluetooth mobile phone
18 Using a Bluetooth audio player
19 Changing the Bluetooth settings
21 Listening to the iPod/iPhone
24 Listening to the other external
components
25 Selecting a preset sound mode
26 Menu operations
32 More about this unit
36 Maintenance
37 Troubleshooting
42 Specifications
[Hold]
EN02-09_KD-R816_001A_f.indd 3EN02-09_KD-R816_001A_f.indd 3 12/29/09 4:35:15 PM12/29/09 4:35:15 PM
4ENGLISH
1 Turn on the power.
2
SET UP
DEMO
Clock
PRO EQ
3 Select <DEMO>.
DEMO
Off
On
Setting the clock
4 Select <Off>.
DEMO
On
Off
5 Finish the procedure.
Canceling the display demonstration
(Initial setting)
[Hold]
7 Select <24H/12H>.
Clock
Set Clock
24H/12H
8 Select <24Hours> or <12Hours>.
24H/12H
24Hours
12Hours
9 Finish the procedure.
1 Turn on the power.
2
SET UP
DEMO
Clock
PRO EQ
3 Select <Clock>.
SET UP
DEMO
Clock
PRO EQ
4 Select <Set Clock>.
Clock
24H/12H
Set Clock
5 Adjust the hour.
Set Clock
1 : 00 AM
6 Adjust the minute.
Set Clock
Clock
Set Clock
24H/12H
1 : 00 AM
(Initial setting)
[Hold]
EN02-09_KD-R816_001A_2.indd 4EN02-09_KD-R816_001A_2.indd 4 12/15/09 9:22:41 AM12/15/09 9:22:41 AM
5ENGLISH
Warning (to prevent accidents and
damage):
• Do not install any battery other than CR2025
or its equivalent.
• Do not leave the remote controller in a place
(such as dashboards) exposed to direct
sunlight for a long time.
• Store the battery in a place where children
cannot reach.
• Do not recharge, short, disassemble, heat the
battery, or dispose of it in a fire.
• Do not leave the battery with other metallic
materials.
• Do not poke the battery with tweezers or
similar tools.
• Wrap the battery with tape and insulate when
throwing away or saving it.
This unit is equipped with the steering wheel
remote control function.
Before operating, connect an exclusive remote
adapter (not supplied) which matches your car
to the steering wheel remote input terminal on
the rear of the unit.
• For details, refer also to the instructions
supplied with the remote adapter.
Preparing the remote controller (RM-RK50)
When you use the remote controller for the first
time, pull out the insulation sheet.
If the effectiveness of the remote controller
decreases, replace the battery.
Replacing the lithium coin battery
CR2025
Caution:
• Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type.
• Battery shall not be exposed to excessive heat
such as sunshine, fire, or the like.
Insulation sheet
EN02-09_KD-R816_001A_2.indd 5EN02-09_KD-R816_001A_2.indd 5 12/15/09 9:22:42 AM12/15/09 9:22:42 AM
6ENGLISH
Basic operations
Control dial
Ejects the disc Loading slot USB (Universal Serial Bus) input terminalDisplay window
Detaches the panel
When you press or hold the following button(s)...
Main unit Remote
controller General operation
Turns on.
• When the power is on, pressing /I/ATT on the remote controller
also mutes the sound or pauses. Press /I/ATT again to cancel
muting or resume playback.
Turns off if pressed and held.
Selects the available sources (if the power is turned on).
• If the source is ready, playback also starts.
Adjusts the volume level.
— Selects items.
—
• Mutes the sound while listening to a source. If the source is “CD,”
“USB FRONT/USB REAR” or “iPod FRONT/iPod REAR,” playback
pauses. Press the control dial again to cancel muting or resume
playback.
• Confirms selection.
Remote sensor
• DO NOT expose to bright sunlight.
Auxiliary input
jack
EN02-09_KD-R816_001A_2.indd 6EN02-09_KD-R816_001A_2.indd 6 12/15/09 9:22:42 AM12/15/09 9:22:42 AM
7ENGLISH
Main unit Remote
controller General operation
Selects the sound mode.
• Enters tone level adjustment directly ( 25) if pressed and held
EQ/BASS-TRE on the main unit.
—
• Enters “Call Menu” screen* or answers incoming call when the unit
rings.
• Ends a call if pressed and held after a phone call conversation.
• Switches the connected mobile phone to the last connected
mobile phone if pressed and held. ( 18)
* If there is no call list, the unit beeps.
—
• Returns to the previous menu.
• Switches the controlling terminal for iPod playback if pressed and
held. ( 21, 29)
—Power off : Checks the current clock time.
Power on : Changes the display information and pattern.
Changing the display information and pattern
Ex.: When tuner is selected as the source
Caution:
If the temperature inside the car is below 0°C,
the movement of animation and text scroll will
be halted on the display to prevent the display
from being blurred. appears on the display.
When the temperature increases, and the
operating temperature is resumed, these
functions will start working again.
Caution on volume setting:
Digital devices (CD/USB) produce very little
noise compared with other sources. Lower the
volume before playing these digital sources
to avoid damaging the speakers by sudden
increase of the output level.
Source operation display
• If a station has been assigned a title, station
title appears after about 5 seconds.
• To assign a title to a station, 9.
Audio level meter display
(<Level Meter>, 28)
EN02-09_KD-R816_001A_4.indd 7EN02-09_KD-R816_001A_4.indd 7 12/23/09 12:08:11 PM12/23/09 12:08:11 PM
8ENGLISH
Manual search
“M” appears, then press
the button repeatedly.
When an FM stereo broadcast is
hard to receive
1
2
]
<Tuner>
]
<Stereo/Mono>
]
<Mono>
Reception improves, but stereo effect
will be lost.
To restore the stereo effect, repeat the same
procedure to select <Stereo>.
Automatic presetting (FM)—
SSM (Strong-station Sequential Memory)
You can preset up to 18 stations for FM.
While listening to a station...
1
2
]
<Tuner>
]
<SSM>
]
<SSM 01 – 06 / SSM 07 – 12 /
SSM 13 – 18>
“SSM” appears and local stations with
the strongest signals are searched and
stored automatically.
To preset another 6 stations, repeat the above
procedure by selecting one of the other 6 SSM
setting ranges.
[Hold]
[Hold]
[Hold]
Listening to the radio
~
]
“FM” or “AM”
Ÿ
lights up when receiving an FM stereo broadcast
with sufficient signal strength.
EN02-09_KD-R816_001A_2.indd 8EN02-09_KD-R816_001A_2.indd 8 12/15/09 9:22:43 AM12/15/09 9:22:43 AM
9ENGLISH
Manual presetting (FM/AM)
You can preset up to 18 stations for FM and 6
stations for AM.
Ex.: Storing FM station of 92.50 MHz into preset
number “4.”
1
]
“92.50MHz”
2
]
Shows the “Preset Mode” screen.
3
]
Selects preset number “4.”
“04” flashes.
Selecting a preset station
or
1
2
Using the remote controller
5
U
/
D
∞
: Changes the preset
stations
2
R
/
F
3
: Searches for stations
[Hold]
Title assignment
You can assign titles up to 30 station
frequencies (FM and AM) using 8 characters
(maximum) for each title.
• If you try to assign titles to more than 30
station frequencies, “Name Full” appears.
Delete unwanted titles before assignment.
1
]
“FM” or “AM”
2
]
Shows the title entry screen.
3
]
Selects a character.
4
]
Moves to the next (or previous)
character position.
5Repeat steps 3and 4until you have
finished entering the title.
6
To erase the entire title, press and hold
DISP
after step 2, then press the control dial.
Available characters
A– Z(upper case), a– z(lower case), 0– 9
(numbers), and the following symbols:
!”#
$%&’()
*+,–./:;<
=>?@–'space
[Hold]
EN02-09_KD-R816_001A_2.indd 9EN02-09_KD-R816_001A_2.indd 9 12/15/09 9:22:43 AM12/15/09 9:22:43 AM
10 ENGLISH
Stopping playback and ejecting
the disc
“No Disc” appears.
Remove the disc, then press
/
SOURCE
to listen to another
playback source.
Prohibiting disc ejection
To cancel the prohibition, repeat the same
procedure.
Selects folder of the MP3/WMA
Selects track
Fast-forwards or
reverses the track
Listening to a disc
~
]
Turn on the power.
Ÿ
All tracks will be played repeatedly until you change
the source or eject the disc.
[Hold]
[Hold]
Selecting a folder/track on the
list
While listening to a disc....
1
]
Enter the list menu.
2
]
Select your desired item.
MP3/WMA: Select your desired folder,
then the desired track by repeating
this step.
• If the MP3/WMA disc contains many tracks,
you can fast search (±10, ±100, ±1000)
through the disc by turning the control dial
quickly.
• To return to the previous menu, press
BACK
.
For MP3/WMA disc, you can also use the search
menu (A to Z, 0 to 9, and OTHERS) to scroll
through the list menu.
• “OTHERS” appears if the 1st character is not A
to Z or 0 to 9, such as #, —, !, and etc.
While in list menu....
1
Press
5
/
∞
to show the search menu.
• The first character of the current folder/file
name appears.
2
Press
5
/
∞
to select your desired character.
Then press the control dial to confirm.
• The track list with the selected character
appears.
EN10-19_KD-R816_001A_2.indd 10EN10-19_KD-R816_001A_2.indd 10 12/15/09 9:22:54 AM12/15/09 9:22:54 AM
Otros manuales para KD-R816
1
Tabla de contenidos
Otros manuales de Receptor de coche de JVC
JVC
JVC KD-DB101 Manual de usuario
JVC
JVC KD-S680 Manual de usuario
JVC
JVC KD-AV7008 Guía
JVC
JVC KD-AVX40 - DVD Player With LCD monitor Guía
JVC
JVC Navigation/CD Receiver KD-NX1R Manual de usuario
JVC
JVC KD-S797 Manual de usuario
JVC
JVC KD-R626 Manual de usuario
JVC
JVC KS-FX801U Manual de usuario
JVC
JVC KD-SX950J Guía
JVC
JVC KD-S891R Guía del administrador
