JVC GR-FX60 Manual de usuario

COMPACT VHS CAMCORDER

LYT0297-001A

INSTRUCTIONS

ENGLISH

GR-FX60

2EN

Dear Customer,

Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read the safety information

and precautions contained in the following pages to ensure safe use of this product.

Using This Instruction Manual

• All major sections and subsections are listed in the Table Of Contents (Zpg. 4, 5).

• Notes appear after most subsections. Be sure to read these as well.

• Basic and advanced features/operation are separated for easier reference.

It is recommended that you . . .

.... refer to the Index (Zpgs. 66 – 69) and familiarize yourself with button locations, etc. before use.

.... read thoroughly the Safety Precautions. They contain extremely important information regarding the safe

use of this product.

You are recommended to carefully read the cautions on pages 70 – 72 before use.

SAFETY PRECAUTIONS

WARNING:

TO PREVENT FIRE OR SHOCK

HAZARD, DO NOT EXPOSE

THIS UNIT TO RAIN OR

MOISTURE.

Warning on lithium cell battery (for clock

operation and remote control unit)

The battery used in this device may present a fire

or chemical burn hazard if mistreated. Do not

recharge, disassemble, heat above 100°C or

incinerate.

Replace the battery with Maxell, Panasonic

(Matsushita Electric), Sanyo or Sony CR2025; use

of another battery may present a risk of fire or

explosion.

nDispose of used battery promptly.

nKeep away from children.

nDo not disassemble and do not dispose of in

fire.

CAUTIONS:

nTo prevent shock, do not open the cabinet. No

user serviceable parts inside. Refer servicing to

qualified personnel.

nWhen you are not using the AC Power

Adapter/Charger for a long period of time, it is

recommended that you disconnect the power

cord from AC outlet.

NOTES:

●

The rating plate (serial number plate) and safety

caution are on the bottom and/or the back of

the main unit.

●

The rating plate (serial number plate) of the AC

Power Adapter/Charger is on its bottom.

This camcorder is designed to be used with PAL-

type colour television signals. It cannot be used

for playback with a television of a different

standard. However, live recording and view-

finder playback are possible anywhere. Use the

BN-V12U/V20U battery packs and, to recharge

them, the provided multi-voltage AC Power

Adapter/Charger. (An appropriate conversion

adapter may be necessary to accommodate

different designs of AC outlets in different

countries.)

Crossed Out Dust Bin Mark

nThe Crossed Out Dust Bin

Mark on the battery pack

indicates that the product

complies with Directives

91/157/EEC and 93/86/EEC.

nNickel-Cadmium (Ni-Cd)

battery pack must be

recycled or disposed of

properly.

This unit is produced to comply with Standard

IEC Publ. 65.

EN3

MAJOR FEATURES

Programme AE with Special

Effects (Zpg. 26, 27)

nElectronic Fog Filter

nND Effect

nSepia

nTwilight

nSports

nNega/Posi

n1/2000 sec. High Speed Shutter

nCamcorder is designed exclusively for the

VHS-C video cassette. Only cassettes marked

VHS-C can be used with this unit.

nHQ VHS is compatible with existing VHS

equipment.

Digital Hyper Zoom

(Zpg. 22)

Picture Stabilizer (Zpg. 23)

Integrated Auto Light

(Zpg. 24)

Zoom in

Zoom out

Menu Adjustment

(Zpg. 30, 31, 32)

Digital Still Camera Built-in

(PC communication capable)

(Zpg. 16 – 19, 46 – 53)

4EN

GETTING STARTED

6 – 13

Power............................................................................................................ 6

Clock (Lithium) Battery Insertion/Removal................................................................ 8

Date/Time Settings............................................................................................ 9

Tape Length Setting .......................................................................................... 10

Loading/Unloading A Cassette............................................................................. 11

Grip Adjustment.............................................................................................. 12

Viewfinder Adjustment ..................................................................................... 12

Shoulder Strap Attachment ................................................................................. 13

Tripod Mounting .............................................................................................. 13

VIDEO RECORDING

14 – 15

Basic Recording............................................................................................... 14

DIGITAL STILL CAMERA (D.S.C.) SHOOTING

16 – 19

Basic Shooting ................................................................................................ 16

RECORDING

20 – 39

Basic Features ................................................................................................ 20

Advanced Features........................................................................................... 25

VIDEO PLAYBACK

40 – 43

Basic Playback................................................................................................ 40

Features ....................................................................................................... 41

Using The Cassette Adapter ................................................................................ 43

PLAYBACK

44 – 45

Basic Connections And Tape Dubbing ...................................................................... 44

D.S.C. PLAYBACK

46 – 53

Basic Playback................................................................................................ 46

Connection .................................................................................................... 47

Advanced Features........................................................................................... 48

CONTENTS

EN5

USING THE REMOTE CONTROL UNIT

54 – 62

Random Assemble Editing .................................................................................. 56

Insert Editing (VIDEO)....................................................................................... 60

Insert Editing (Insert A Still Image From The Built-in Memory Onto A Tape) ....................... 61

Audio Dubbing ................................................................................................ 62

TROUBLESHOOTING

63 – 65

INDEX

66 – 69

Controls, Connectors And Indicators ...................................................................... 66

Indications..................................................................................................... 68

CAUTIONS

70 – 72

SPECIFICATIONS

OPTIONAL ACCESSORIES

PROVIDED ACCESSORIES

•AC Power Adapter/

Charger AA-V15EG •Cassette Adapter C-P7U

• Cable Adapter

• Battery Pack BN-V12U

•Shoulder Strap•Remote Control

Unit RM-V709U

•PC Connection Cable x 1 •CD-ROM including two

software programmes

•Lithium Battery CR2025 x 2

(for clock operation and

remote control unit)

(for Windows®)

•Audio/Video (A/V) cable •Editing cable •DC Cord

6EN

GETTING STARTED

Power

This camcorder’s 3-way power supply system lets you

choose the most appropriate source of power.

NOTES:

●

No function is available without power supply.

●

Use only the specified power supply.

●

Do not use provided power supply units with other

equipment.

CHARGING THE BATTERY PACK

SUPPLY POWER

Connect the charger’s AC power cord to a wall outlet.

ATTACH BATTERY PACK

Align the marks and slide the battery pack in the

direction of the arrow until it locks in place.

•The CHARGE indicator begins blinking to indicate

charging has started.

DETACH BATTERY PACK

When the CHARGE indicator stops blinking but stays

lit, charging is finished. Slide the battery pack

opposite the direction of the arrow.

USING THE BATTERY PACK

ATTACH BATTERY PACK

Hook its end to the camcorder ( ) and push the

battery pack in until it locks in place ( ) .

DETACH BATTERY PACK

Slide BATTERY RELEASE and pull out the battery

pack.

ATTENTION:

Before detaching the power source,

make sure that the camcorder’s power

is turned off. Failure to do so can result

in a camcorder malfunction.

REFRESH

The AC Power Adapter/Charger features a

REFRESH function that allows you to fully

discharge the battery pack before recharg-

ing.

Perform the REFRESH function after no less

than 5 chargings.

To discharge the battery . . .

.... attach the battery pack to the adapter as

shown in the above illustration. Then

push REFRESH. The REFRESH indicator

lights when discharging starts, and goes

out when discharging is complete.

CHARGE indicator

Marks

To AC outlet

Hook on.

Push in.

BATTERY RELEASE

REFRESH indicator

REFRESH switch

Battery pack Charging time Discharging time

BN-V12U approx. 1 hr. 10 min. approx. 3 hrs. 30 min.

BN-V20U approx. 1 hr. 50 min approx. 6 hrs. 40 min.

Battery pack

Approximate recording time (unit: min.)

BN-V12U 65 (40)

BN-V20U 105 (65)

( ) : when the video light is on.

INFORMATION:

VU-V856KIT is a set composed of the BN-V856U battery

pack and AA-V80EG AC Power Adapter/Charger.

The BN-V856U battery pack provides approx. 7 hours of

recording time when the video light is off. Also read

thoroughly the VU-V856KIT’s instruction manuals.

It is impossible to charge the BN-V856U battery pack

using the provided AC Power Adapter/Charger. Use the

optional AA-V80EG AC Power Adapter/Charger.

EN7

Charge Marker

A charge marker is provided on the battery pack to

help you remember whether it has been charged or

not. Two colours are provided (red and black)—you

choose which one means charged and which means

discharged.

NOTES:

●

The recording time per charge is affected by such factors as the time spent in Record-Standby mode and the

frequency of zooming. It is safer to have spare battery packs to cover 3 times the planned shooting time.

●

Charging times noted on page 6 are for a fully discharged battery pack, and discharging times are for a fully

charged battery pack.

●

Charging and discharging times vary according to the ambient temperature and the status of the battery pack.

●

Remember to set the charge marker after charging a battery pack or after detaching a discharged one from

your camcorder.

●

Perform the REFRESH function after no less than 5 chargings.

●

While the AC Power Adapter/Charger’s power cord is disconnected from the AC outlet, it is possible to

discharge the battery by pressing the REFRESH switch. During that time, the AC Power Adapter/Charger does

not charge the battery. When discharging is complete, detach the battery from the AC Power Adapter/

Charger to store it.

●

High temperatures can damage the battery pack, so use only where good ventilation is available. Do not

allow it to discharge in a container, such as a bag.

●

If you stop recharging or discharging part way through, make sure to remove the battery pack before

unplugging the adapter’s AC cord.

●

Remove the battery pack from the adapter immediately after discharging.

●

To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.

●

Make sure you unplug the DC cord before charging or discharging the battery pack.

●

The CHARGE indicator may not light properly with a brand new battery pack, or with one that has been

stored for an extended period. In this case, remove and reattach the battery pack and recharge it. The

CHARGE indicator should blink during recharging. If it doesn’t, contact your nearest JVC dealer.

USING AC POWER

Use the AC Power Adapter/Charger (connect as

shown in the illustration).

NOTES:

●

The provided AC Power Adapter/Charger features

automatic voltage selection in the AC range from

110 V to 240 V.

●

When using the DC cord, make sure you connect

the end of the cord with the core filter to the

camcorder. The core filter reduces interference.

USING A CAR BATTERY

Use the optional Car Battery Charger/Adapter

(connect as shown in the illustration).

NOTES:

●

When using the car battery, leave the engine

idling.

●

The optional Car Battery Charger/Adapter (BH-V3E)

can also be used to charge the battery pack (except

BN-V20U/V856U).

●

When using the optional Car Battery Charger/

Adapter, refer to the respective instruction booklet.

To DC IN jack

DC OUT

terminal

To AC outlet

AC Power

Adapter/Charger

AA-V15EG

DC Cord

To car’s cigarette

lighter socket

Charge marker

Car Battery

Charger/Adapter

BH-V3E (optional)

8EN

GETTING STARTED

(cont.)

Clock (Lithium) Battery Insertion/Removal

This battery is necessary for clock operation and to

perform date/time settings.

SWITCH OFF POWER

Switch off the unit’s power and remove the power

supply unit (battery pack, AC Power Adapter/Battery

Charger, etc.).

REMOVE BATTERY HOLDER

Pull out the battery holder.

INSERT BATTERY IN HOLDER

Insert the battery in the holder, and be sure to have

the “+” mark visible.

RE-INSERT HOLDER

Slide the holder back into the slot until you hear a

click.

NOTES:

●

See “SAFETY PRECAUTIONS” (

pg. 2) for information

on safe handling of lithium batteries.

●

To avoid losing the battery and/or battery holder, place

the camcorder with the grip side up as shown in the

illustration when inserting/removing the battery.

Slot

Battery holder

EN9

NEXT

M.W.B.

D . ZOOM

TELE MACRO

DATE TIME

TAPE LENGTH

PICTURE

SNAPSHOT



RETURN

AUTO

ON

OFF

T45

FINE

FULL

NEXT

M.W.B.

D . ZOOM

TELE MACRO

DATE TIME

TAPE LENGTH

PICTURE

SNAPSHOT



RETURN

AUTO

ON

OFF

T45

FINE

FULL

YEAR

MONTH

DAY

TIME

EXIT

1999

1

22:50

DATE TIME

Date/Time Settings

SELECT OPERATION SYSTEM AND

MODE

Set the System Select Switch to “VIDEO” or “D.S.C.” ,

and set the Power Switch to “PRO.”.

•The power lamp comes on.

ACCESS MENU SCREEN

Press MENU.

SELECT FUNCTION

Rotate the Select Dial to move the highlight bar to

“DATE/TIME”, then press it. The DATE/TIME Menu

appears.

•If you decide you want to return the date and time

to the previous settings, rotate the Select Dial to

move the highlight bar to “EXIT” and press it, then

go to step 7.

•If you want to set only the time without changing

the date, go to step 5.

SET DATE

Rotate the Select Dial to move the highlight bar to the

item you want to set and then press it. When the

setting begins blinking, rotate the Select Dial until the

correct setting appears and then press it. The setting

stops blinking.

•Repeat this procedure until you’re satisfied with the

Date settings (“YEAR”, “MONTH” and “DAY”).

SET TIME

Rotate the Select Dial to move the highlight bar to

“TIME” and then press it. When the hour setting

begins blinking, rotate the Select Dial until the correct

setting appears and then press it. When the hour

setting stops blinking and the minute setting begins

blinking, rotate the Select Dial until the correct setting

appears and then press it. The minute setting stops

blinking.

START CLOCK OPERATION

When none of these settings (“YEAR”, “MONTH”,

“DAY”, “TIME”) blinks, rotate the Select Dial to move

the highlight bar to “EXIT”, and press it. The Menu

Screen reappears with the highlight bar on

“RETURN”.

CLOSE MENU SCREEN

Press the Select Dial.

NOTE:

To display the date and time in the camcorder’s display

and on a connected TV, see “Date/Time Insert”

(

pg. 28).

Power lamp

24-hour indication

Menu Screen

DATE/TIME Menu

Select Dial

MENU Button

Power Switch

Display

System

Select Switch

10 EN

NEXT

M.W.B.

D . ZOOM

TELE MACRO

DATE TIME

TAPE LENGTH

PICTURE

SNAPSHOT



RETURN

AUTO

ON

OFF

T45

FINE

FULL

NEXT

M.W.B.

D . ZOOM

TELE MACRO

DATE TIME

TAPE LENGTH

PICTURE

SNAPSHOT



RETURN

AUTO

ON

OFF

T60

FINE

FULL

T30

T45

T60

EXIT

TAPE LENGTH

SP T45

GETTING STARTED

(cont.)

Menu Screen

Tape length indicator

TAPE LENGTH

Setting Menu

Display

Tape Length Setting

Set the tape length according to the length of the tape

used.

ACCESS MENU SCREEN

First set the System Select Switch to “VIDEO”, then

set the Power Switch to “PRO.”. Press MENU.

SELECT FUNCTION

Rotate the Select Dial to move the highlight bar to

“TAPE LENGTH”, then press it. The TAPE LENGTH

Setting Menu appears.

SET TAPE LENGTH

Rotate the Select Dial to move the highlight bar to the

correct setting. T30=30 minutes of recording time,

T45=45 minutes, and T60=60 minutes.

•If you decide you want to return the tape length to

the previous setting, rotate the Select Dial to move

the highlight bar to “EXIT”.

CLOSE MENU SCREEN

Press the Select Dial. The Menu Screen reappears

with the highlight bar on “RETURN”. Press the Select

Dial again to close the Menu Screen.

NOTE:

The tape remaining time (

pg. 15) displayed in the

viewfinder is correct only if the correct tape length has

been selected.

Select Dial Power Switch

MENU Button

Viewfinder

System

Select Switch

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Videocámara de JVC

JVC

JVC GR-D93 Manual de usuario

JVC

JVC GY-HM200SP Manual de lista de piezas

JVC

JVC Everio GZ-MG750BEK Manual de operación y mantenimiento

JVC

JVC Everio GZ-HM200 Manual de usuario

JVC

JVC GR-D22US Guía del administrador

JVC

JVC EVERIO GZ-HM650BUS Manual de usuario

JVC

JVC GZ-MS130BU Manual

JVC

JVC Everio GS-TD1U Manual de operación y mantenimiento

JVC

JVC GRDVL9000EG Manual de usuario

JVC

JVC GZ-MG365H Manual de usuario

JVC

JVC GZMG21US - Everio Camcorder - 680 KP Manual de usuario

JVC

JVC GR-D74U Manual de usuario

JVC

JVC Everio GZ-MS110B Instrucciones de uso

JVC

JVC GR-FXM383 Manual de usuario

JVC

JVC KY-F550 Manual de usuario

JVC

JVC GR-AX660 Manual de usuario

JVC

JVC Everio GZ-VX715BEK Manual de operación y mantenimiento

JVC

JVC GR-D71 Manual de usuario

JVC

JVC GZ-MS100E Series Manual de usuario

JVC

JVC GZ-RX515 Manual de operación y mantenimiento

JVC

JVC GZ HD5 - Everio Camcorder - 1080i Manual de usuario

JVC

JVC GZ-MG70US Manual de usuario

JVC

JVC JY-HM360E Manual de usuario

JVC

JVC Everio GZ-HM960 Instrucciones de uso

Manuales populares de Videocámara de otras marcas

Toshiba

Toshiba CAMILEO Z100 Manual de usuario

Panasonic

Panasonic NV-VS40B Manual de usuario

Canon

Canon RC 260 Manual de usuario

Sony

Sony Handycam DCR-DVD7E Manual de usuario

Brinno

Brinno TimeLapse TLC200 Manual de usuario

Panasonic

Panasonic AG-HMC152EN Manual de usuario

Insignia

Insignia NS-DCC5HB09 - Camcorder - 720p Manual de usuario

MYDLINK

MYDLINK DCS-6100LH Manual de usuario

Sony

Sony video Hi8 Handycam CCD-TR555 Manual de usuario

SECURECOM

SECURECOM V-5014B Manual de usuario

Panasonic

Panasonic HDC-SD100 Manual de usuario

Sharper Image

Sharper Image U-VIDEO Manual de usuario

Canon

Canon LEGRIA HV40 Manual de usuario

Sony

Sony Handycam DCR-VX2000 Manual de usuario

RCA

RCA CC616 Manual de usuario

Panasonic

Panasonic NVM40 Manual de usuario

ATIK Cameras

ATIK Cameras Horizon Manual de usuario

Sony

Sony Handycam HDR-CX580V Manual de usuario