JUMO 40.2005 Manual de usuario

Multi-range

differential pressure transmitter

Type 40.2005

B40.2005

Operating instructions

2010/-10-11/00550566

Multi-range

differential pressure transmitter

Type 40.2005

B40.2005

Operating instructions

2010/-10-11/00550566

1 General

Do not blow into the pressure connections!

This will damage the instrument.

The instrument must only be operated within its

specifications!

It does not meet the requirements for “equipment

with a safety function”, as defined by Pressure

Equipment Directive 97/23/EC.

For hazardous media such as oxygen, acetylene,

combustible and toxic substances, refrigerating

plants, pressure vessels, etc., please comply with

existing, pertinent regulations!

Disregarding these regulations may result in

damage to property or personal injury.

1 General

Do not blow into the pressure connections!

This will damage the instrument.

The instrument must only be operated within its

specifications!

It does not meet the requirements for “equipment

with a safety function”, as defined by Pressure

Equipment Directive 97/23/EC.

For hazardous media such as oxygen, acetylene,

combustible and toxic substances, refrigerating

plants, pressure vessels, etc., please comply with

existing, pertinent regulations!

Disregarding these regulations may result in

damage to property or personal injury.

JUMO GmbH & Co. KG is certified according to DIN ISO

9001. The pressure transmitter described below complies

with DIN and VDE requirements. You have acquired a

product that in itself meets strict requirements and which

complies with or exceeds all the stated specifications.

However, should you have any cause for complaint, please

return the instrument to us, with an as accurate as possible

description of the discovered defect.

Please read these operating instructions before placing the

instrument in service.

We reserve the right to make technical changes to our

products.

Only suitably qualified personnel are allowed to

work on this instrument.

Should you need detailed technical information

about this instrument, please ask for data sheet

40.2005, or look on the Internet at: www.jumo.net

JUMO GmbH & Co. KG is certified according to DIN ISO

9001. The pressure transmitter described below complies

with DIN and VDE requirements. You have acquired a

product that in itself meets strict requirements and which

complies with or exceeds all the stated specifications.

However, should you have any cause for complaint, please

return the instrument to us, with an as accurate as possible

description of the discovered defect.

Please read these operating instructions before placing the

instrument in service.

We reserve the right to make technical changes to our

products.

Only suitably qualified personnel are allowed to

work on this instrument.

Should you need detailed technical information

about this instrument, please ask for data sheet

40.2005, or look on the Internet at: www.jumo.net

However, should you have any difficulties with starting up or

using our products, do not hesitate to contact us.

Phone: (06 61) 60 03-7 15

Fax: (06 61) 60 03-6 06

Internet: www.jumo.net

However, should you have any difficulties with starting up or

using our products, do not hesitate to contact us.

Phone: (06 61) 60 03-7 15

Fax: (06 61) 60 03-6 06

Internet: www.jumo.net

2 Instrument identification

The device version and the important data are located on

the nameplate.

(1) Pressure input

(2) Output signal

(3) Supply voltage

(4) Serial number

(5) Maximum pressure

TYP 402005 Made in Germany

: 0...2.5 / 5 / 7.5 / 10 hPa

: 0... 10 V / 0 (4)...20 mA

: 14...38 VDC / 12...31 VAC

: 00010610

: 680 hPa

Ser. Nr.

Pmax

(1)

(2)

(3)

(4)

(5)

2 Instrument identification

The device version and the important data are located on

the nameplate.

(1) Pressure input

(2) Output signal

(3) Supply voltage

(4) Serial number

(5) Maximum pressure

TYP 402005 Made in Germany

: 0...2.5 / 5 / 7.5 / 10 hPa

: 0... 10 V / 0 (4)...20 mA

: 14...38 VDC / 12...31 VAC

: 00010610

: 680 hPa

Ser. Nr.

Pmax

(1)

(2)

(3)

(4)

(5)

3 Mounting

3.1 Operating conditions

Differential pressure can be measured in dry, non-ionizing

and aggressive gases with this measuring instrument.

It should not be installed near to sources of interference

(transformers, signal sources, electric motors) or sources of

heat.

Tremors or vibrations at the mounting location can lead to

measurement errors.

The instrument was adjusted at an ambient temperature of

20°C, vertically, with the process connection pointing down.

Any variation of this mounting position and ambient

temperature can cause measurement errors.

3 Mounting

3.1 Operating conditions

Differential pressure can be measured in dry, non-ionizing

and aggressive gases with this measuring instrument.

It should not be installed near to sources of interference

(transformers, signal sources, electric motors) or sources of

heat.

Tremors or vibrations at the mounting location can lead to

measurement errors.

The instrument was adjusted at an ambient temperature of

20°C, vertically, with the process connection pointing down.

Any variation of this mounting position and ambient

temperature can cause measurement errors.

3.2 Dimensions / attachment

R2.1

3.2 Dimensions / attachment

R2.1

4 Electrical connection

Only suitable qualified professionals are allowed to

connect the pressure transmitters!

Please comply with the regulations and safety

requirements for electrical, weak current and power

current installations, particularly taking into account

pertinent national regulations, such as VDE 0100.

The supply voltage must not be connected to

output signal terminals! This would result in an

instrument fault.

4 Electrical connection

Only suitable qualified professionals are allowed to

connect the pressure transmitters!

Please comply with the regulations and safety

requirements for electrical, weak current and power

current installations, particularly taking into account

pertinent national regulations, such as VDE 0100.

The supply voltage must not be connected to

output signal terminals! This would result in an

instrument fault.

Connection Terminal

assignment

Screw

terminal

0(4) - 20 mA, 3 wires, output 409

Voltage supply

14 - 38 V DC,

12 - 31 V AC

0V/S-

S+

2/4

0 - 10 V DC, 3 wires, output 409

Voltage supply

14 - 38 V DC,

12 - 31 V AC

0V/S-

S+

2/4

42 3

Connection Terminal

assignment

Screw

terminal

0(4) - 20 mA, 3 wires, output 409

Voltage supply

14 - 38 V DC,

12 - 31 V AC

0V/S-

S+

2/4

0 - 10 V DC, 3 wires, output 409

Voltage supply

14 - 38 V DC,

12 - 31 V AC

0V/S-

S+

2/4

42 3

5 Start-up

5.1 Pressure connection

✱Connect the tube with the higher pressure to "+".

✱Connect the tube with the lower pressure to "-".

5 Start-up

5.1 Pressure connection

✱Connect the tube with the higher pressure to "+".

✱Connect the tube with the lower pressure to "-".

Tabla de contenidos

Otros manuales de Transmisor de JUMO

JUMO

JUMO dTRANS T02 PCP Manual de usuario

JUMO

JUMO dTRANS T06 Manual de usuario

JUMO

JUMO dTRANS p02 Manual de usuario

JUMO

JUMO dTRANS O2 01 Manual de usuario

JUMO

JUMO TRANS T06 Junior Manual de usuario

JUMO

JUMO HART dTRANS p20 Ex d Manual de usuario

JUMO

JUMO 907021/10 Manual de usuario

JUMO

JUMO dTRANS T02 Ex Manual de usuario

JUMO

JUMO AQUIS 500 Ci Manual de usuario

JUMO

JUMO B 90.7027.1 Manual de usuario

JUMO

JUMO CTI-750 Manual de usuario

JUMO

JUMO dTRANS p02 Manual de usuario

JUMO

JUMO JUMO dTRANS p20 DELTA Manual de usuario

JUMO

JUMO dTRANS T03 Series Manual de usuario

JUMO

JUMO dTRANS T02 LCD Manual de usuario

JUMO

JUMO JUMO dTRANS p20 DELTA Manual de usuario

JUMO

JUMO ecoTRANS Lf 03 Manual de usuario

JUMO

JUMO dTRANS T01 HART Manual de usuario

JUMO

JUMO 907021/10 Manual de usuario

JUMO

JUMO 404304 Series Manual de usuario

JUMO

JUMO MIDAS S21 Ex Manual de usuario

JUMO

JUMO CTI-750 Manual de usuario

JUMO

JUMO Wtrans B Manual de usuario

JUMO

JUMO CTI-500 Manual de usuario

Manuales populares de Transmisor de otras marcas

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manual del propietario

Honeywell

Honeywell 5816WMBR Manual de usuario

Kamstrup

Kamstrup READy MTU Instrucciones de funcionamiento

Omega

Omega ZW Series Manual de usuario

ABB

ABB Field 264H Guía

Alinco

Alinco DJ-V17T Manual de usuario

Dejero

Dejero EnGo 3x Manual de usuario

Rosemount

Rosemount 4600 Manual de usuario

Speaka Professional

Speaka Professional 2342740 Manual de usuario

trubomat

trubomat GAB 1000 Manual de usuario

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manual de usuario

Rondish

Rondish UT-11 Manual de usuario

MG 10JRE Manual de usuario

Burkert

Burkert 8177 Manual de usuario

Firetide

Firetide HotPort 3203 Manual

Tele Radio

Tele Radio T9-02 Manual de usuario

Rotronic

Rotronic HygroFlex HF3 Series Manual de usuario

Jamara

Jamara FCX6 Pro Tel Manual de usuario