JUMAR REG-03 Mini Especificaciones técnicas
JUMAR REG-03
Mini
MICROPROCESOR CONTROLLER OF THE
PELLET'S BURNER
REG-03 Mini
INSTRUCTION OF INSTALLING
AND THE MAINTENANCE
- 1 -
MENU
OK
REG-03
Mini
MODE INFO
JUMAR
REG-03 Mini
FAN
CO
CH PUMP
STB
STB
IN-BUILD
ºC
ROOM
THERMOSTAT
ALARMS
FAN SPEED
REGULATOR
CLOCK
/TIMER
IGNITER FEEDER
LANGUAGES
JUMAR REG-03
Mini
- 2 -
JUMAR REG-03
Mini
TABLE OF CONTENTS
SAFETY OF OPERATIONAL USE...........................................................................5
INSTALLATION GUIDANCE.................................................................................5
TECHNICAL DATA...............................................................................................6
THE IMPLEMENTATION.......................................................................................7
THE PRICIPLE OF WORKING...............................................................................7
THE CONNECTION DIAGRAM..............................................................................
OPERATION CONTROLLER................................................................................11
BUTTON'S DESCRIPTION.................................................................................11
THE DRIVER'S HANDLING................................................................................12
MEASURE PANEL DESCRIPTION........................................................................13
ALARMS........................................................................................................14
WORKING MODES..........................................................................................15
TEMPERATURE SETTING..................................................................................17
MENU STRUCTURE..........................................................................................18
SETTINGS' TABLES.........................................................................................19
MENU DESCRIPTION.......................................................................................21
PARAMETERS................................................................................................22
SET EATING.............................................................................................22
SET BURNER..............................................................................................23
SET TIMER.................................................................................................24
SET CLOCK................................................................................................27
SET MENU..................................................................................................27
SET SERVICE..............................................................................................28
SYSTEM LOGS............................................................................................28
TERMS OF WARRANTY......................................................................................29
NOTES..............................................................................................................31
- 3 -
JUMAR REG-03
Mini
Thanks you fo choosing ou p oduct.
This inst uction should make the installation of the d ive easie and make
you accustomed to the maintenance and the safe using of the device.
Befo e installing please ead the inst uction ca efully and get to know the
functioning of the d ive .
Any questions occu , contact with the JUMAR company.
P.P.U.H JUMAR Jerzy Podhajski
ul. Opawska 112
47-400 Racibórz
tel./fax 32-415-80-39
tel. 32-415-54-24
e-mail: biuro@ju-mar.eu
www.ju-mar.eu
- 4 -
JUMAR REG-03
Mini
SAFETY OF OPERATIONAL USE
Before using read carefully the instruction.
Installing and connecting the regulator should be done by a professional staff. All
available safety requirements should be taken into consideration.
Before switching the regulator on, the accuracy of all connections ought to be
checked.
Guarantee proper working conditions according to the device's specification.
INSTALLATION GUIDANCE
Do not power the device from the same source of power as others devices of high
power without appropriate net filters.
Avoid putting signal wires in a direct contiguity and in parallel to energetic and
powering wires.
Avoid closeness of remotely-controlled devices, loads of high power devices with
a group or phase regulation of power and other devices producing large
interference of impulses.
When switching on the feed mechanism, remember that in the installation of a
building a breaker or a circuit breaker should exist. This part ought to be near the
device, easy to reach by the operator and marked as a device disconnecting the
mechanism.
For problems caused by disobeying the instruction, the manufacturer is not
responsible for.
- 5 -
JUMAR REG-03
Mini
TECHNICAL DATA
Burner handling: 250kW / 500kW*
Sensors: KTY-210 / PT1000**
Measurement range: -20 – 120°C / -20 – 400°C**
Measurement resolution: 0.1 °C
Time of measurements: 1 s
Data's reading: Graphics OLED display 16x100px
Control outputs:
•Igniter (relay): ~230V 3A (2A)
•Feeder (triac): ~230V 2A (0.8A)
•Fan (triac): ~230V 2A (0.8A)
•Pump (relay): ~230V 2A (0.8A)
Protection:
•Temperature (build-in) STB (80°C-400°C)
•Electric (external) Fuse 4A
Inputs:
•Room thermostat: Open contact
•Fire sensor: Opto element
•eating sensor: KTY-210 / PT1000**
•Burner feeder sensor: Bimetal 75°C
•STB sensor: Bimetal (95°C-400°C)
Visual signalling:
•LCD screen: Messages, measurements, settings
•Sound: Alarms, buttons
Power supply: ~110-230 V 50/60 z 2VA
Working temperature: 5°C - 50°C
*Only in >V2.0 fi mwa e
**Optional
- 6 -
JUMAR REG-03
Mini
THE IMPLEMENTATION
REG – 03Mini controller is a modern microprocessor device controlling the work
of the pellet's burner. Implementation of advanced driver's algorithm and the flame
sensor ensures the simplicity of maintenance and the full automatization of the burning
process. The usage of a graphic organic (OLED) display assures an easy and clear
interaction between the use and the device. The driver is adapted also to working with
the central heatings pump. Thanks to these functions, the device can be used in
expanded installations of the central heating without using additional steering devices.
The regulator is also equipped with an output of room thermostat which enables the
change of the furnace's working parameter after reaching a particular temperature in
the room. To controller added timer functions – now user can set heating time.
THE PRICIPLE OF WORKING
The device's work is based on providing fuel via steering the feeder appropriately
and the work of a fan which steers the burning process. After reaching a particular
temperature of the heating water, the driver goes into the mode of sustaining the
temperature or switches the burner completely off. The ignition of fuel starts
automatically with the help of igniter which is connected to this driver. The driver
enables the control of the furnace's work thanks to the room thermostat. It is possible
to steer the heating in relation to the actual temperature in the room. The regulator is
also equipped with the self-control systems (detecting the malfunction of the
temperature's sensors) and mechanisms monitoring the furnace's work preventing from
going beyond the range of safety for the installation of the central heating (STB).
- 7 -
JUMAR REG-03
Mini
THE CONNECTION DIAGRAM
The figure above shows a scheme demonstrating connection of sensors and controlling
elements to the controller. Before connecting the regulator to network, it is necessary to
check all the connections carefully. One has to take particular note of not placing ~230V
power supply cables instead of the sensor. Improper connection may permanently
damage the microprocessor device.
- 8 -
`
IGNITER
~230V
FEEDER
~230V
~
POWER SUPPLY
~230V
FUSE
4A
TT
CH
SENSOR
STB
FUSE
G
A1
A2
FAN
~230V
CH PUMP
~230V
FEEDER
SENSOR
FIRE
SENSOR
ROOM
THERMOSTAT
T
JUMAR REG-03
Mini
CONNECTION DESCRIPTION
Terminal
No. Designation Input/
Output Description
1
2
F2
F1
input
input Main fuse connector
3
4
L
N
input
input Power supply connector
5
6
L
N
output
output Igniter connector
7
8
L
N
output
output Feeder connector
9
10
L
N
output
output Fan connector
11
12
x
L
x
output Central heating pump connector
13
14
STB
STB
input
input STB fuse connector (bimetal 95°C)
15
16
C
C
input
input Central heating sensor connector
17
18
FIRE (-)
FIRE (+)
input
input Fire sensor connector (opto element)
19
20
FEED
FEED
input
input Burner feeder sensor connector (bimetal 75°C - 90°C)
21
22
T
T
input
input
Room thermostat/External control connector
(if not use, put a jumper)
Fire sensor (polarity):
CAUTION!!
Bad connection of the sensor causes the weak response of the sensor to the flame/fire.
- 9 -
FIRE (+)
FIRE (-) Input 17
Input 18
JUMAR REG-03
Mini
In the picture below, illustrates an example of placing sensors:
Sensor
No. Designation Name Description
1 STB STB
Sensor
STB sensor (securing sensor) has to be places in
the boiler along with the C sensor.
2 C C
Sensor Central heating water sensor (C ).
3 FEED Burner
Sensor
The sensor protects the burner against excessive
temperature growth. Bimetal sensor has to
selected according to the burner.
4 FIRE Fire
Sensor
The flame sensor has to be placed so that it could
detect flame and heat in the furnace/boiler. You
should not subject it to high temperatures. When
connecting, you have to take note of polarization
of the sensor (+/-).
- 10 -
Tabla de contenidos
Otros manuales de Controladores de JUMAR
