Johnson 40-6502 Manual de usuario

Manual-Leveling Ro ary Laser

Model Nos. 40-6502 and 40-6512

Instruction Manual

Congratulations on your choice of this Manual-Le eling Rotary Laser.

We suggest you read this instruction manual thoroughly before using

the instrument. Sa e this instruction manual for future use.

This is a Class IIIa laser tool and is manufactured to comply

with CFR 21, parts 1040.10 and 1040.11 as well as international

safety rule IEC 285.

6697H-All_Manuals 1/31/13 11:04 AM Page 1

Table of Contents

1. Kit Contents

2. Features and Functions

3. Safety Instructions

4. Location/Content

of Warning Labels

5. Location of Parts/Components

6. Operating Instructions

7. Using the Product

8. Self-Check & Fine Calibration

9. Technical Specifications

10. Application Demonstrations

11. Care and Handling

12. Product Warranty

13. Warranty Registration

14. Accessories

1. Kit Contents

For Model No. 40-6502

Description Qty.

Manual-Leveling Rotary Laser 1

“AA” Alkaline Batteries 4

Tinted lasses 1

Instruction Manual with Warranty Card 1

Soft-sided Carrying Case 1

For Model No. 40-6512

Description Qty.

Manual-Leveling Rotary Laser 1

“AA” Alkaline Batteries 4

Wall/Ceiling Mount 1

8’ rade Rod 1

Detector with 2 “AAA” Batteries and Clamp 1

Tinted lasses 1

Magnetic Target 1

Elevating Tripod 1

Instruction Manual with Warranty Card 1

Hard-Shell Carrying Case 1

6697H-All_Manuals 1/31/13 11:04 AM Page 2

2. Features and Functions

• Emits a horizontal laser plane.

• Emits a vertical laser plane with simultaneous 90º split beam.

• Large and small scan modes achieve a chalk line.

• Scan line can be moved clockwise or counter-clockwise.

• Variable rotation speed.

• Rugged Housing.

3. Safety Instructions

Please read and understand all of the following instructions, prior

to using this tool. Failure to do so, may void the warranty.

DANGER!

Class IIIa Laser Product

Max. Power Output: ≤5mW

Wavelength: 625-645nm

THIS TOOL E ITS LASER RADIATION.

DO NOT STARE INTO BEA .

AVOID DIRECT EYE EXPOSURE.

6697H-All_Manuals 1/31/13 11:04 AM Page 3

ATTENTION IMPORTANT

• Read all instructions prior to operating this laser tool. Do not remove any labels from tool.

• Do not stare directly at the laser beam.

• Do not project the laser beam directly into the eyes of others.

• Do not set up laser tool at eye level or operate the tool near a reflective surface as

the laser beam could be projected into your eyes or into the eyes of others.

• Do not place the laser tool in a manner that may cause someone to unintentionally

look into the laser beam. Serious eye injury may result.

• Do not operate the tool in explosive environments, i.e. in the presence of gases or

flammable liquids.

• Keep the laser tool out of the reach of children and other untrained persons.

• Do not attempt to view the laser beam through optical tools such as telescopes as

serious eye injury may result.

• Always turn the laser tool off when not in use or left unattended for a period of time.

• Remove the batteries when storing the tool for an extended time (more than 3 months)

to avoid damage to the tool should the batteries deteriorate.

• Do not attempt to repair or disassemble the laser tool. If unqualified persons attempt

to repair this tool, warranty will be void.

• Use only original Johnson®parts and accessories purchased from your Johnson®

authorized dealer. Use of non-Johnson®parts and accessories will void warranty.

6697H-All_Manuals 1/31/13 11:04 AM Page 4

4. Location/Content of Warning Labels

6697H-All_Manuals 1/31/13 11:04 AM Page 5

5. Location of Part/Components

Rotating beam

output window

Keypad

Z-level Vial

Z-vial calibrating

hole

Base unlock/lock

knob

Y-vial leveling knob

DC 6V outlet

X-level Vial

Y-level Vial

X-vial leveling

knob

5/8” - 11 thread

90º Split Beam

Output Window

6697H-All_Manuals 1/31/13 11:04 AM Page 6

6. Operating Instructions

I PORTANT: It is the responsibility of the user to verify the

calibration of the instrument before each use.

1. Power ON/OFF

2. Power LED

3. Decrease rotation

speed/rotate scan clockwise

4. Increase rotation speed/rotate scan counterclockwise

5. Scan and rotate mode LED

6. Scan mode key

1. Power ON/OFF: Press this key to turn on or turn off the laser.

ON rotary laser is on, power LED (2) is on (when

battery is low the power LED will blink)

OFF laser and power LED (2) is off

2. Scan mode key: Press this key to change the scan size

Fast Rotation: When the laser is turned on, the laser is in its fastest

rotation speed (scan & rotate mode LED (5) is on), laser is rotating.

Small scan: Laser is in small scan (scan & rotate mode LED (5) blinks).

Big scan: Laser is in big scan (scan & rotate mode LED (5) blinks).

Small scan Big scan DOT Fast rotation

6697H-All_Manuals 1/31/13 11:04 AM Page 7

DOT: Laser stops rotating and projects a DOT (scan & rotate mode

LED (5) blinks).

3. UP and Down Keys:

In the rotation mode:

Press rotation speed increases (Note: when turning the power on,

the laser is in its highest rotation speed)

Press rotation speed decreases

In the scan mode:

Press scan moves in counterclockwise direction

Press scan moves in clockwise direction

6697H-All_Manuals 1/31/13 11:04 AM Page 8

7. Using the Product

Connecting the Laser to its Base

Position the two slots on the laser into the base, tighten the locking

knob to secure the base to the laser. The laser can now be

secured to a tripod.

Battery Installation

1. Disconnect the laser from the base as shown in the figure on the

next page (rotate the base unlock/lock knob counterclockwise to

unlock the laser from the base).

2. Remove battery cover (rotate the battery compartment knob coun-

terclockwise to the open position).

3. Put in 4 “AA” alkaline batteries following the polarity specified in

the battery compartment.

Base

Unlock/Lock

Knob

Horizontal

Vertical

6697H-All_Manuals 1/31/13 11:04 AM Page 9

4. Put the battery cover back into place (rotate the battery compart-

ment knob to the lock position).

Level Vial Adjustment: To adjust the laser to center the vial.

Horizontal Usage

1. Put 4 “AA” alkaline batteries in the unit.

2. As shown above, place the laser on a flat surface or

5/8” - 11 tripod

3. Adjust the vial leveling knobs to center the bubble inside the

X-vial and Y-vial.

4. Turn on the laser.

5. After finishing work, turn off the laser.

Battery

compartment

Base

Unlock/Lock

Knob

X-level Vial

Y-level Vial

Z-level Vial

Z-vial

leveling

knob

X-vial leveling

knob

Y-vial

leveling knob

Horizontal status Vertical status

6697H-All_Manuals 1/31/13 11:04 AM Page 10

Otros manuales para 40-6502

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Instrumento de medición de Johnson

Johnson

Johnson 1886-0000 Manual de usuario

Johnson

Johnson 1889-0600 Manual de usuario

Johnson

Johnson LDM195 Manual de usuario

Johnson

Johnson 1888-1100 Manual de usuario

Johnson

Johnson 40-6527 Manual de usuario

Johnson

Johnson JLX 40-6590 Manual de usuario

Johnson

Johnson 40-6526 Manual de usuario

Johnson

Johnson LDM100 Manual de usuario

Johnson

Johnson Old Town Sportsman iPilot Manual de usuario

Johnson

Johnson 40-6618 Manual de usuario

Johnson

Johnson 40-6700 Manual de usuario

Johnson

Johnson 40-6625 Manual de usuario

Johnson

Johnson 40-6676 Manual de usuario

Johnson

Johnson 40-6624 Manual de usuario

Johnson

Johnson 40-6515 Manual de usuario

Johnson

Johnson 1888-0700 Manual de usuario

Johnson

Johnson LDM150 Manual de usuario

Johnson

Johnson 40-6557 Manual de usuario

Johnson

Johnson LDM150 Manual de usuario

Johnson

Johnson 40-6932 Instrucciones de funcionamiento y mantenimiento

Johnson

Johnson 40-6590 Manual de usuario

Johnson

Johnson 1454-0000 Manual de usuario

Johnson

Johnson 1888-1900 Manual de usuario

Johnson

Johnson 1456-0000 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario