Johnson Level & Tool 40-6526 Manual de usuario

Electronic Horizontal & Vertical Self-Leveling

Rotar Laser Level

Model Nos. 40-6526, 40-6529, 40-6544

Instruction Manual

Congratulations on your choice of this Electronic Horizontal & Vertical

Self-Le eling Rotary Laser Le el. We suggest you read this instruction

manual thoroughly before using the instrument. Sa e this instruction manual

for future use.

This tool emits one rotating laser beam plus one plumb beam and is ideal for

laying out indoor or outdoor construction projects.

This is a Class IIIa laser tool and is manufactured to comply with CFR 21, parts

1040 .10 and 1040 .11 as well as international safety rule IEC 285.

4411H-English_Manuals 3/11/11 1:13 PM Page 1

Table of Contents

1. it Contents

2. Features and Functions

3. Safety Instructions

4. Location/Content

of Warning Labels

5. Location of Parts/Components

6. Operating Instructions

7. Using the Product

8. Self-Check & Fine Calibration

9. Technical Specifications

10. Application Demonstrations

11. Care and Handling

12. Product Warranty

13. Warranty Registration

14. Accessories

1. Kit Contents

Description Model No. 40-6526 Qty.

Electronic Horizontal & Vertical Self-Leveling Red Beam Rotary Laser Level 1

Alkaline “C” Batteries 4

Tinted Glasses 1

Instruction Manual with Warranty Card 1

Soft-Sided Carrying Case 1

Description Model No. 40-6529 Qty.

Electronic Horizontal & Vertical Self-Leveling Red Beam Rotary Laser Level 1

Detector with Bracket & 9V Battery 1

Tinted Glasses 1

Target 1

Charger 1

Alkaline Battery Pack (batteries not included) 1

Remote with 9V Battery 1

Rechargeable battery pack 1

Instruction Manual with Warranty Card 1

Hard-Shell Carrying Case 1

4411H-English_Manuals 3/11/11 1:13 PM Page 2

Description Model No. 40-6544 Qty.

Electronic Horizontal & Vertical Self-Leveling Green Beam Rotary Laser Level 1

Rechargeable battery pack 1

Alkaline battery pack (batteries not included) 1

Charger 1

Remote with 9V Battery 1

Ceiling Mount 1

Tinted Glasses 1

Target 1

Instruction Manual with Warranty Card 1

Hard-Shell Carrying Case 1

2. Features and Functions

• Large electronic self-level range: The unit works when within

±5°. When beyond the ±5° leveling range, the laser line flashes,

rotation of the beam stops, and an audible alarm activates.

• Vertical and horizontal working modes: electronic self-leveling in

both horizontal and vertical mode with one rotating laser beam

and one 90º split beam.

• Two rotational speeds: 200 and 500 rpm

• Scan function adjusts the scan line size and scan direction.

• Out-of-level alarm ensures the working accuracy.

• Fine self-calibration function

• In “Tilt Mode” the laser will stop rotating and flash when bumped

to ensure work accuracy.

• Slope function allows the user to perform slope in both

X & Y axis.

• Dust and rain resistant

4411H-English_Manuals 3/11/11 1:13 PM Page 3

3. Safety Instructions

Please read and understand all of the following instructions, prior

to using this tool. Failure to do so, may void the warranty.

Model 40-6526 & Model 40-6529

Model 40-6544

DANGER!

Class IIIa Laser Product

Max. Power Output: ≤5mW

Wavelength: 625-645nm

THIS T L EMITS LASER RADIATI N.

D N T STARE INT BEAM.

AV ID DIRECT EYE EXP SURE.

DANGER!

Class IIIa Laser Product

Max. Power Output: ≤5mW

Wavelength: 522-542nm

THIS T L EMITS LASER RADIATI N.

D N T STARE INT BEAM.

AV ID DIRECT EYE EXP SURE.

4411H-English_Manuals 3/11/11 1:13 PM Page 4

ATTENTION IMPORTANT

• Read all instructions prior to operating this laser tool. Do not remove any labels from tool.

• Do not stare directly at the laser beam.

• Do not project the laser beam directly into the eyes of others.

• Do not set up laser tool at eye level or operate the tool near a reflective surface as

the laser beam could be projected into your eyes or into the eyes of others.

• Do not place the laser tool in a manner that may cause someone to unintentionally

look into the laser beam. Serious eye injury may result.

• Do not operate the tool in explosive environments, i.e. in the presence of gases or

flammable liquids.

• eep the laser tool out of the reach of children and other untrained persons.

• Do not attempt to view the laser beam through optical tools such as telescopes as

serious eye injury may result.

• Always turn the laser tool off when not in use or left unattended for a period of time.

• Remove the batteries when storing the tool for an extended time (more than 3 months)

to avoid damage to the tool should the batteries deteriorate.

• Do not attempt to repair or disassemble the laser tool. If unqualified persons attempt

to repair this tool, warranty will be void.

• Use only original Johnson®parts and accessories purchased from your Johnson®

authorized dealer. Use of non-Johnson®parts and accessories will void warranty.

4411H-English_Manuals 3/11/11 1:13 PM Page 5

4. Location/Content of Warning Labels

4411H-English_Manuals 3/11/11 1:13 PM Page 6

6. perating Instructions

IMP RTANT: It is the responsibility of the user to verify the

calibration of the instrument before each use.

Notes:

• Always check to make sure that the laser is in the off position

(when power indicator lamp is not lit) before removing

and replacing batteries.

• Both Ni-MH (40-6529 & 40-6544) and “C” alkaline batteries (included

in 40-6526 only) can be used in the unit’s battery compartment.

5. Location of Part/Components

Rotating Head

5/8” thread hole on side

5/8” thread hole on bottom

Screw for battery cover

Output Window

Remote Receiving

Point in horizontal

direction

Handle

4411H-English_Manuals 3/11/11 1:13 PM Page 7

Alkaline Battery Installation

Put 4 “C” alkaline batteries into the alkaline battery pack according

to polarity direction, then insert the battery pack into the laser.

Insert the rechargeable battery into the laser.

Char in the Rechar eable Batteries

Insert the charger into an AC outlet and into the rechargeable battery

pack, the rechargeable battery is now charging. The charger

indication light is red when it is charging, and it turns green when

the battery is full.

Charger indicator light

4411H-English_Manuals 3/11/11 1:13 PM Page 8

Charging directly to rechargeable battery pack

Charging to the laser

Note:

When the power indicator light is flashing on the charger, the battery

is low and the life of the battery can be extended when charging

the battery in its lowest voltage. Charge the rechargeable battery

every two or three months if the laser will be unused for a long

period of time.

Before Using Your Laser Level

When you charge the new battery or one which has not been used

for long periods of time, it may not reach full charge until after

you have discharged it fully in use and recharge it several times.

Instrument Usage

1. Put in Ni-MH rechargeable battery pack, or 4 “C” alkaline batteries

(not included, except in 40-6526), or connect the 6V DC battery

adaptor to the unit’s power jack.

2. Place the laser on a platform or tripod, connecting with tripod to

the 5/8" screw thread at the bottom of the instrument.

Note: If the laser is inclined beyond the self-leveling range, the

laser will deliver an audible alarm. You will need to re-position the

laser inside of its self-leveling range.

4411H-English_Manuals 3/11/11 1:13 PM Page 9

3. Press power button to turn power on, and press operation buttons

on control panel or use remote control (not included with 40-6526)

to adjust to your desired working status.

4. After finishing operation or before moving the instrument, turn the

power off.

7. Using the Product

Place the unit on a relatively level surface like a tripod, floor, etc

during operation.

perating Panels

TILT mode key

Reset TILT mode

X direction LED

Y direction LED

Remote Control Panel

operating panel for calibration (located

beneath the sliding nameplate panel of

the remote control)

TILT mode LED Power LED

Remote control LED

Slope key

Scan/dot

counterclockwise key

Slope adjustment key Scan/dot clockwise key

Remote on/off key

Rotating speed key

On/Off key

Scan key

Slope adjustment key

4411H-English_Manuals 3/11/11 1:13 PM Page 10

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Nivel láser de Johnson Level & Tool

Johnson Level & Tool

Johnson Level & Tool 40-6625 Manual de usuario

Johnson Level & Tool

Johnson Level & Tool 1455-0000 Manual de usuario

Johnson Level & Tool

Johnson Level & Tool 40-6515 Manual de usuario

Johnson Level & Tool

Johnson Level & Tool 40-6164 Manual de usuario

Johnson Level & Tool

Johnson Level & Tool 40-6675 Manual de usuario

Johnson Level & Tool

Johnson Level & Tool 1435-1000D Manual de usuario

Johnson Level & Tool

Johnson Level & Tool 1760-2400 Manual de usuario

Johnson Level & Tool

Johnson Level & Tool 40-0918 Manual de usuario

Johnson Level & Tool

Johnson Level & Tool 40-6560 Manual de usuario

Johnson Level & Tool

Johnson Level & Tool JLX 5700D Manual de usuario

Johnson Level & Tool

Johnson Level & Tool JLX 5700D Manual de usuario

Johnson Level & Tool

Johnson Level & Tool 40-6060 Manual de usuario

Johnson Level & Tool

Johnson Level & Tool 40-0915 Manual de usuario

Johnson Level & Tool

Johnson Level & Tool 40-6065 Manual de usuario

Johnson Level & Tool

Johnson Level & Tool 9105/40-0910 Manual de usuario

Johnson Level & Tool

Johnson Level & Tool 40-6522 Manual de usuario

Johnson Level & Tool

Johnson Level & Tool 40-6164 Manual de usuario

Manuales populares de Nivel láser de otras marcas

Nedo

Nedo ET-5 Manual de usuario

geo-FENNEL

geo-FENNEL Maxi-Liner FL 65 HP Manual de usuario

LaserLiner

LaserLiner X2-Laser Manual de usuario

Spectra

Spectra LL300N Manual de usuario

geo-FENNEL

geo-FENNEL Selection PRO FLG 40-PowerCross GREEN SP Manual de usuario

Nedo

Nedo Crossliner 4 Manual de usuario

Lasertec

Lasertec FX360G Manual de usuario

Flex

Flex ALC 8 Manual de usuario

Black & Decker

Black & Decker LZR5 Manual de usuario

Johnson

Johnson 40-6692 Manual de usuario

Cocraft

Cocraft HL 20-SG Manual de usuario

Zircon

Zircon iLine Manual de usuario

HWH

HWH 310 SERIES Manual de usuario

Leica

Leica iCON robot 60 Manual de usuario

LaserLiner

LaserLiner SuperCross-Laser SCL 2 Manual de usuario

LaserLiner

LaserLiner ActiveFinder XP Manual de usuario

DeWalt

DeWalt DW082 Manual de usuario

imex

imex EL20 Manual de usuario