Johnson Controls T701DFN-1 Manual de usuario

Owner’s Manual

Remote sensor ready

Self-prompting adjustment

Auto 2-pipe changeover

when used with accessory

changeover sensor

Dry contact equipped

Backlit display

One For AllTM

works with

most all fan coil systems

Electric heat ready

Non-volatile

memory

Dual setpoint with

adjustable deadband

Keypad lockout

Configurable display

Display either F or C

Terminals on backplate

2 or 4 pipe systems

Non-Programmable

Thermostat

model T701DFN-1

Thermostat

Fan Coil

P/N T701DFN-1

Table Of Contents

FRONT PANEL

DISPLAY

BASIC OPERATION

ADVANCED SETUP

ABOUT ADVANCED FEATURES

& OPERATION

WARRANTY

Page 1

CAUTION

WARNING

SELECTING THE HEAT

OR COOL MODE

Follow Installation Instructions

carefully. Disconnect Power

to the Heater/Air Conditioner

before removing the old therm-

ostat and installing the new

thermostat.

This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when this equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user

will be required to correct the interference at his/her own expense.

United States

Canada

North American Emissions Compliance

This Class (A) digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numerique de la Classe (A) respecte toutes les exigences du Reglement sur le materiel brouilleur du Canada.

‘

Front Panel

Page 2

Liquid Crystal Display

with Thermoglow

Up/Down Buttons

Mode Button

Fan/Override Button

Heat or Cool Indicator

Heat = Red, Cool = Green

COOL

HEAT

AUTO

Mode Fan

Display

OUTSIDE

unoccupied

Mode Indicators - Page 5-8

Selects the operational mode of the equipment.

HEAT - Indicates the heating mode.

COOL - Indicates the cooling mode.

AUTO - Indicates the system will automatically

changeover between heat and cool modes

as the temperature varies.

OFF - Indicates heating and cooling are turned off.

Room Temperature Display

Indicates current room temperature.

Desired Set Temperature - Page 9

Indicates desired room temperature(s).

Setup icon - Pages 10-14

Indicates the thermostat is in the advanced setup

mode.

Page 3

Display

OUTSIDE

unoccupied

Fan icon - Page 9

Indicates fan operation.

Fan = low speed

Fan = medium speed

Fan = high speed

When only the Fan icon is displayed, the fan is in

the Auto mode and will run only when necessary to

heat or cool.

Locked icon - Page 21

Indicates keypad has been locked.

Outside icon - Pages 13 & 22

Indicates the temperature displayed is from the

optional outside sensor.

Unoccupied icons - Pages 13-14

Indicates a dry contact forced Unoccupied time

period is in effect.

Page 4

70 68

HEAT

COOL

HEAT

AUTO

OFF

Press

MODE

Press

MODE

Page 5

The HEAT setting indicates

the temperature that the room

has to fall to before the

heating source will turn

on to heat the room.

Heating Only

The COOL setting indicates

the temperature that the room

has to rise to before the

cooling source will turn

on to cool the room.

Cooling Only

OFF indicates both heating

and cooling are turned off.

Off

AUTO will automatically

select heat or cool based

on room temperature

demand.

Heating or Cooling

Select Mode by Pressing the MODE Button

Selecting the Heat or Cool Mode 4-Pipe Operation

Heat Only

Step #4 = 1 in the Advanced Setup section,

page 11.

70 68

HEAT

OFF

Press

MODE

Selecting the Heat or Cool Mode 2-Pipe Operation

The HEAT setting indicates

the temperature that the room

has to fall to before the

heating source will turn

on to heat the room.

Heating Only

OFF indicates both heating

and cooling are turned off.

Off

Page 6

Cool Only

Step #4 = 2 in the Advanced Setup section,

page 11.

OFF

Press

MODE

COOL

Selecting the Heat or Cool Mode 2-Pipe Operation

The COOL setting indicates

the temperature that the room

has to rise to before the

cooling source will turn

on to cool the room.

Cooling Only

OFF indicates both heating

and cooling are turned off.

Off

Page 7

HEAT indicates the temperature

that the room has to fall to before

the heating source energizes. If

the water supply is cold, this

screen and heating would be

locked out.

COOL indicates the temperature

that the room has to rise to before

the cooling source energizes. If

the water supply is hot, this

screen and cooling would be

locked out.

OFF

Press

MODE

Press

MODE

Page 8

70 69

Note: If the water temperature is changed during the

year, the thermostat will then automatically lock out the

incorrect mode.

Heating and/or Cooling

Step #4 = 3 in Advanced Setup (page 11), and a

changeover sensor is used.

Step #4 = 4 or 5 in Advanced Setup (page 11).

Operation is the same as a 4-pipe system (page 5).

Selecting the Heat or Cool Mode 2-Pipe Operation

If step #4 = 3, this

screen will not appear.

AUTO will automatically select

heat or cool based on the room

temperature demand.

OFF indicates both heating

and cooling are turned off.

Selecting Your Desired Temperature

(adjusting the setpoints)

Basic Operation

COOL

HEAT

AUTO

AUTO OR PROGRAM MODE

Pressing the UP or DOWN button in Auto or Program

mode will adjust both the heat and cool set temperatures

simultaneously.

buttons.

Adjust the desired

set temperature with the

Fan Operation

Press

FAN

Press

FAN

Press

FAN

Press

FAN

Press

FAN

Low Speed Medium Speed High Speed Auto

Fan

Pressing the FAN button will run the fan in

low, medium, or high speed continuously

(see below and page 20).

When only the Fan icon is displayed, the fan

is in the Auto mode and will run only when

necessary to heat or cool (see below and

page 20).

Note: If the thermostat is placed in the Off mode, the fan

will de-energize (see page 5).

Fan Fan Fan

Page 9

Otros manuales para T701DFN-1

Tabla de contenidos

Otros manuales de Termostato de Johnson Controls

Johnson Controls

Johnson Controls TEC2201-2 Manual de usuario

Johnson Controls

Johnson Controls ACC-WIFI Manual de usuario

Johnson Controls

Johnson Controls York DPC-1 Manual

Johnson Controls

Johnson Controls GLAS Manual de servicio

Johnson Controls

Johnson Controls S1-TTSCC01 Guía

Johnson Controls

Johnson Controls T7200 Manual de usuario

Johnson Controls

Johnson Controls T8000 Series Manual de usuario

Johnson Controls

Johnson Controls T7000 Series Manual de usuario

Johnson Controls

Johnson Controls TCN-890x Manual de usuario

Johnson Controls

Johnson Controls TEC2003-3 Manual de usuario

Johnson Controls

Johnson Controls T9180 Instrucciones de funcionamiento

Johnson Controls

Johnson Controls TEC2101-3 N2 Manual de usuario

Johnson Controls

Johnson Controls T600HPP-2 Manual de usuario

Johnson Controls

Johnson Controls T600HCN-1 Manual de usuario

Johnson Controls

Johnson Controls TEC2103-1 Manual de usuario

Johnson Controls

Johnson Controls T8800 Series Manual de usuario

Johnson Controls

Johnson Controls T701DFP-4 Manual de usuario

Johnson Controls

Johnson Controls TEC2103-2 Manual de usuario

Johnson Controls

Johnson Controls Hx3 S1-THXU430W Guía

Johnson Controls

Johnson Controls TEC3000 Series Manual de usuario

Johnson Controls

Johnson Controls T2000 series Manual de usuario

Johnson Controls

Johnson Controls TVI-TD-6007 Series Manual de usuario

Johnson Controls

Johnson Controls T9100 Manual de usuario

Johnson Controls

Johnson Controls T600HCN-3 Manual de usuario

Manuales populares de Termostato de otras marcas

EWELLY

EWELLY EW-181 Manual de usuario

Prolon

Prolon T1100 Instrucciones de instalación

Computherm

Computherm Q20 Manual de usuario

Heatmiser

Heatmiser neoStat Manual de usuario

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario

Saswell

Saswell SAS920XWHB-7-S-RF Guía

Aircalo

Aircalo TFP1-ET85P2 Manual de usuario

Honeywell

Honeywell CM721 Manual de usuario

Carrier

Carrier DEBONAIR 33CS Manual de usuario

Lennox

Lennox iHarmony Zone Thermostat Instrucciones de montaje

Gemtech

Gemtech GT7000 Manual de instrucciones

Rollei

Rollei Smartes 45000 Manual de usuario

Sinope

Sinope TH1300RF Manual de usuario

Honeywell

Honeywell RLV4305 Manual de usuario

Honeywell

Honeywell Prestige 2.0 THX9421 Manual de usuario

NuTone

NuTone NTBZ48 Instrucciones de funcionamiento originales

Stelpro

Stelpro MAESTRO ASMT402AD Manual de usuario