JLG 3513PS Manual de uso y cuidado

Operation & Safety

Manual

Original Instructions

Keep this manual with machine at all times.

An Oshkosh Corporation Company

Platforms for

3513PS,

4013PS,

4014PS,

4017PS

31200345

Revised

July 15, 2016

Revision Log

a31200345

Revision Log REVISION LOG

December 12, 2007 - A - Original Issue of Manual

March 5, 2008 - B - Revised pages 1-3, 9-1 and 9-2.

November 16, 2009 - C - Revised covers and page 9-2.

March 22, 2010 - D - Revised pages b, c, d, 1-1, 1-5, 2-1 thru 2-11, 3-2, 3-3, 3-4, 4-1, 4-3, 4-4,

5-1, 5-2, 5-3, 6-2, 6-3, 7-1 thru 7-6, 8-1 & 9-1.

October 8, 2013 - E - Revised covers and pages d, 2-4, 2-5, 5-3, 7-4 thru 7-7, 8-1, 9-1, 9-2 &

9-3.

July 15, 2016 - F - Revised rear cover and pages 2-4 thru 2-8, 2-11, 4-1, 4-3 & 7-2.

Read This First

b31200345

Read This First

This manual is a very important tool! Keep it with the machine at all times.

The purpose of this manual is to provide owners, users, operators, lessors, and lessees

with the precautions and operating procedures essential for the safe and proper machine

operation for its intended purpose.

Due to continuous product improvements, JLG Industries, Inc. reserves the right to make

specification changes without prior notification. Contact JLG Industries, Inc. for updated

information.

Operator Qualifications

The operator of the machine must not operate the machine until this manual has been

read, training is accomplished and operation of the machine has been completed under

the supervision of an experienced and qualified operator. Operation within the U.S.A.

requires training per OSHA 1910.178.

Operators of this equipment must possess a valid, applicable driver’s license, be in good

physical and mental condition, have normal reflexes and reaction time, good vision and

depth perception and normal hearing. Operator must not be using medication which

could impair abilities nor be under the influence of alcohol or any other intoxicant during

the work shift.

In addition, the operator must read, understand and comply with instructions contained

in the following material furnished with the material handler:

• This Operation & Safety Manual

• Telehandler Safety Manual (ANSI only)

• All instructional decals and plates

• Any optional equipment instructions furnished

The operator must also read, understand and comply with all applicable Employer,

Industry and Governmental rules, standards and regulations.

Modifications

Any modification to this machine must be approved by JLG.

Read This First

c31200345

This product must comply with all safety related bulletins. Contact JLG Industries, Inc. or

the local authorized JLG representative for information regarding safety-related bulletins

which may have been issued for this product.

JLG Industries, Inc. sends safety related bulletins to the owner of record of this machine.

Contact JLG Industries, Inc. to ensure that the current owner records are updated and

accurate.

JLG Industries, Inc. must be notified immediately in all instances where JLG products have

been involved in an accident involving bodily injury or death of personnel or when

damage has occurred to personal property or the JLG product.

FOR:

• Accident Reporting and Product Safety Publications

• Current Owner Updates

• Questions Regarding Product Applications and Safety

• Standards and Regulations Compliance Information

• Questions Regarding Product Modifications

CONTACT:

Product Safety and Reliability Department

JLG Industries, Inc.

13224 Fountainhead Plaza

Hagerstown, MD 21742

USA

or Your Local JLG Office

(Addresses on back cover)

In USA:

Toll Free: 1-877-JLG-SAFE (1-877-554-7233)

Outside USA:

Phone: +1-717-485-6591

E-mail:

ProductSafety@JLG.com

Read This First

d31200345

Other Publications Available

For detailed machine operation procedures and safety information, please refer to the

appropriate machine Operation & Safety Manual.

Table of Contents

i31200345

TABLE OF CONTENTS

Revision Log

Read This First

Operator Qualifications ........................................................................... b

Modifications............................................................................................... b

Other Publications Available ................................................................. d

Table of Contents

Section 1 - General Safety Practices

1.1 Hazard Classification System ....................................................................1-1

Safety Alert System and Safety Signal Words...............................1-1

1.2 General Precautions .....................................................................................1-1

1.3 Operation Safety............................................................................................1-2

Electrical Hazards....................................................................................1-2

Tip Over Hazard.......................................................................................1-3

Load Falling Hazard ...............................................................................1-4

Lifting Personnel .....................................................................................1-5

Pinch Points and Crush Hazards........................................................1-6

Fall Hazard .................................................................................................1-8

Chemical Hazards ...................................................................................1-9

Section 2 - Pre-Operation and Inspection

2.1 Pre-Operation Check and Inspection.....................................................2-1

2.2 Safety Decals ...................................................................................................2-3

Console.......................................................................................................2-3

Fixed Platform..........................................................................................2-4

Extendable Platform ..............................................................................2-6

2.3 Walk-Around Inspection.............................................................................2-8

2.4 Operational Check ........................................................................................2-9

2.5 Platform Gate ............................................................................................... 2-10

2.6 Lanyard Anchorage Points...................................................................... 2-11

2.7 Platform Extension (If Equipped).......................................................... 2-12

Section 3 - Controls and Indicators

3.1 General..............................................................................................................3-1

3.2 Controls.............................................................................................................3-2

Indicator Panel.........................................................................................3-3

Boom Joystick ..........................................................................................3-4

Table of Contents

ii 31200345

Section 4 - Operation

4.1 Preparing Machine for Platform Operation.........................................4-1

4.2 Platform Operation.......................................................................................4-2

Starting the Engine ................................................................................4-2

Normal Engine Operation ...................................................................4-2

Control Operation ..................................................................................4-3

Shut-Down Procedure ..........................................................................4-3

4.3 Loading and Securing for Transport ......................................................4-4

Section 5 - Platform

5.1 Approved Platforms.....................................................................................5-1

5.2 Unapproved Platforms................................................................................5-1

5.3 Telehandler/Platform Capacity ................................................................5-2

5.4 Platform Installation.....................................................................................5-3

Section 6 - Emergency Procedures

6.1 Emergency Operation .................................................................................6-1

Operator Unable to Control Machine .............................................6-1

Platform or Boom Caught Overhead...............................................6-1

6.2 Emergency Lowering Of Boom................................................................6-2

Cab Auxiliary Power System ...............................................................6-2

Platform Auxiliary Power System......................................................6-2

6.3 Incident Notification ....................................................................................6-3

Section 7 - Lubrication and Maintenance

7.1 Introduction ....................................................................................................7-1

Clothing and Safety Gear.....................................................................7-1

7.2 General Maintenance Instructions..........................................................7-1

7.3 Service and Maintenance Schedules .....................................................7-2

10, 50 & 1000 Hour Maintenance Schedule..................................7-2

7.4 Operator Maintenance Instructions.......................................................7-4

Fuel System...............................................................................................7-4

Tires .............................................................................................................7-6

Battery ........................................................................................................7-8

Section 8 - Additional Checks

8.1 General..............................................................................................................8-1

8.2 Auxiliary Power System ..............................................................................8-1

Table of Contents

iii31200345

Section 9 - Specifications

9.1 Product Specifications.................................................................................9-1

Performance .............................................................................................9-1

Dimensions ...............................................................................................9-2

Supplemental Information..................................................................9-3

Index

Inspection, Maintenance and Repair Log

Table of Contents

iv 31200345

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de elevación de JLG

JLG

JLG G6-42A Guía

JLG

JLG 1930ES Manual de usuario

JLG

JLG 600AJ Guía de instalación y uso

JLG

JLG 1350SJP Manual de uso y cuidado

JLG

JLG LiftPod FS60 Guía de instalación y uso

JLG

JLG 400S Manual de usuario

JLG

JLG 600SC Manual de uso y cuidado

JLG

JLG LiftPod FT70 Guía de instalación y uso

JLG

JLG 1230ES Guía de instalación y uso

JLG

JLG EcoLift70 Manual de uso y cuidado

JLG

JLG TH336 Manual de usuario

JLG

JLG 450A II Series Guía de instalación y uso

JLG

JLG 260MRT Manual de usuario

JLG

JLG 400SJ Manual de uso y cuidado

JLG

JLG 1930ES Manual de uso y cuidado

JLG

JLG 601S Guía de instalación y uso

JLG

JLG LiftPod FS80 Guía de instalación y uso

JLG

JLG EcoLift50 Guía de instalación y uso

JLG

JLG 260MRT Manual de uso y cuidado

JLG

JLG AM Series Manual de uso y cuidado

JLG

JLG 10msp Guía de instalación y uso

JLG

JLG G5-18A Manual de usuario

JLG

JLG 600A Manual de uso y cuidado

JLG

JLG E600 Guía de instalación y uso

Manuales populares de Sistema de elevación de otras marcas

morse

morse 82H-124 Manual de usuario

Braun

Braun NL955 Series Manual de usuario

haacon

haacon 1889.10 Manual de usuario

Protekt

Protekt AT 252 Manual de usuario

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manual de usuario

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manual de usuario

Genie

Genie Z-60/34 Manual de usuario

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manual de usuario

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manual de usuario

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manual de programación

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manual de programación

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manual de programación

BERG

BERG BeNomic EasyLeaf Manual de usuario

Powermate

Powermate LiftGate LG-3 Manual de usuario

Snorkel

Snorkel TM12 Series Manual de usuario

Terberg

Terberg OMNIDEKA Manual de usuario

Harmar Mobility

Harmar Mobility AL625 Instrucciones de funcionamiento

Rotary

Rotary SPO16 Manual de usuario