JFY tech WiFi Plug Manual de usuario
WiFi Plug
User Manual
Shenzhen JFY Tech.Co.,Ltd
Content
1. Introduction ....................................................................................................................................................................................................... 1
2. Device Layout .................................................................................................................................................................................................... 1
3. Connect the WiFi Plug with the Inverter ............................................................................................................................................. 1
4. Network setting ................................................................................................................................................................................................ 1
5. Parameters setting .......................................................................................................................................................................................... 5
6. Modify the account information for the WiFi Plug.......................................................................................................................12
7. Register on SolarMAN Portal ...................................................................................................................................................................13
8. Log in SolarMAN Portal to manage power station .......................................................................................................................16
9. Contact us ..........................................................................................................................................................................................................17
WiFi Plug User Manual
Wifi Plug.LPB-V1.0--EN
1
1. Introduction
SolarMAN WiFi Plug is a data logging module. With its "plug & play" function, the WiFi Plug can
collect information of PV systems from the inverter when it is connected with an inverter.
With the integrated WiFi function, the WiFi Plug can connect with a router and transmit data to the web
server, enabling users to view the collected data by logging in the online monitoring portal
(www.solarmanpv.com/portal). In addition, users can also get access to the internal web server of the
WiFi Plug via WiFi and directly obtain data from it.
2. Device Layout
3. Connect the WiFi Plug with the Inverter
3.1. Power off the solar inverter
3.2. Remove the cover of the RS 232 Port on the bottom of the inverter.
3.3. Connect the WiFi Plug with the RS232 Port on the inverter by fastening screws. Please double check
if the WiFi Plug is locked tightly or not as the sealability is important.
4. Network setting
4.1 Power on the solar inverter and the WiFi Plug will start to work.
Notice:
The setting hereinafter is operated with Windows XP for reference only. If other operating systems are used,
please follow the corresponding procedures.
Picture 1
WiFi Plug User Manual
Wifi Plug.LPB-V1.0--EN
2
4.2 Prepare a computer or device, e.g. tablet PC or smart phone that enables WiFi.
4.3 Obtain an IP address automatically
4.3.1 Open Wireless Network Connection Properties; double click Internet Protocol (TCP/IP)
4.3.2 Select Obtain an IP address automatically, and click OK
Picture 2
Picture 3
WiFi Plug User Manual
Wifi Plug.LPB-V1.0--EN
3
4.4 Set WiFi connection to the WiFi Plug
4.4.1 Open wireless network connection and click View Wireless Networks
4.4.2 Select wireless network of the WiFi Plug. The network name consists of AP and the serial number
of the product. Then click Connect.
Picture 4
Picture 5
WiFi Plug User Manual
Wifi Plug.LPB-V1.0--EN
4
4.4.3 Please enter password which are both WIFI123456 as default.
4.4.4 Connection successful
WIFI123456
WIFI123456
Notice:
If AP_ (serial number of product) is not available in the wireless network list, there may be problems in the
connection between the WiFi Plug and the inverter or in setting of WiFi Plug. Please check if the WiFi was installed
ok, and inverter has been powered on.
Picture 6
Picture 7
WiFi Plug User Manual
Wifi Plug.LPB-V1.0--EN
5
5. Parameters setting
5.1 Open a web browser, and enter 10.10.100.254, the “Authentication Required” interface will appear,
and then fill in username and password, both of which are admin as default.
admin
admin
If the “Authentication Required” interface cannot appear, please use another web browser!
Recommended browsers: Internet Explorer 8 or above, Google Chrome 15 or above, Firefox 10 or above!
Picture 8
Picture 9
WiFi Plug User Manual
Wifi Plug.LPB-V1.0--EN
6
5.2 In the System interface of WiFi Plug, you can view general information of the WiFi Plug.
Picture 10
WiFi Plug User Manual
Wifi Plug.LPB-V1.0--EN
7
5.3 Click “Work Mode” and the “Work Mode” interface will appear, here you can set the “Work Mode”.
Please see Picture 11
Notice:
1. In STA mode, after the web server is connected to the router, it will work as a client only, and the SSID of AP
network will be invisible.
2.
In AP mode, after the web server is connected to the router, it will work as another router, and the SSID of
the AP network will be visible.
3.
The WiFi Plug works under both AP and STA mode is recommended.
Picture 11
WiFi Plug User Manual
Wifi Plug.LPB-V1.0--EN
8
5.4 Start quick setting via “STA Setting” interface
5.4.1 Click Scan to search the wireless network
5.4.2 Select the wireless network you need to connect, and then click OK
Picture 12
Picture 13
Tabla de contenidos
Manuales populares de Unidad de control de otras marcas
Festo
Festo Compact Performance CP-FB6-E Manual de lista de piezas
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manual de usuario
JS Automation
JS Automation MPC3034A Manual de usuario
JAUDT
JAUDT SW GII 6406 Series Guía rápida
Spektrum
Spektrum Air Module System Manual de usuario
BOC Edwards
BOC Edwards Q Series Manual de usuario
