Jeti Specbos 1211 Manual

Short Instructions

Spectroradiometer

specbos 1211

JETI Technische Instrumente GmbH

Tatzendpromenade 2

D-07745 Jena

Tel +49-3641-225 680

Fax +49-3641-225 681

e-mail: sales @ jeti com

Internet: www jeti com

Operating Instructions JETI – Spectroradiometer specbos 1211

- 2 -

Operating Instructions JETI – Spectroradiometer specbos 1211

License Agreement for JETI Technische Instrumente GmbH Software Products

IMPORTANT READ CAREFULLY BEFORE USING THE JETI SOFTWARE

JETI hereby grants to you a non-exclusive license to use one copy of the delivered JETI

software program (the "software") on a single computer according to the following items:

The software is in "use" on the computer when it is loaded into temporary memory (i e

RAM) or installed into permanent memory (e g hard disk, CD-ROM, or other storage

device) of the computer However, installation on a network server for the sole purpose of

distribution to one or more other computer(s) shall not constitute "use" for which a separate

license is required, provided you have separate license for each computer to which the

software is distributed

It is only allowed to use the software in connection with the JETI product (instrument,

spectrometer or OEM electronics), which was delivered with this software For additional

JETI products you need an extra software license

The software is owned by JETI or its suppliers and is protected by German copyright laws

and international treaty provisions and all other applicable national laws Therefore, you

must treat the software like any other copyrighted material (e g a book or musical

recording) except that if the software is not copy protected you may either

(a) make one copy of the software solely for backup or archival purposes, or

(b) transfer the software to a singlehard disk provided you keep the original solely for

backup or archival purposes You may not copy the user documentation provided with

the software and the connected JETI product

You may not:

(i) permit other individuals to use the software except under the terms listed above;

(ii) modify, translate, reverse engineer, decompile, disassemble (except to the extent that

this restriction is expressly prohibited by law) or create derivative works based upon

the software or documentation;

(iii) copy the software or documentation (except for back-up or archival purposes);

(iv) rent, lease, transfer, or otherwise transfer rights to the software or documentation;

(v) remove any proprietary notices or labels on the software or documentation

Any such forbidden use shall immediately terminate your license to the Software

(a) You agree that you shall only use the software and documentation in a manner that

complies with all applicable laws in the jurisdictions in which you use the software and

documentation, including, but not limited to, applicable restrictions concerning

(b) You may not use the software in an attempt to, or in conjunction with, any device,

program or service designed to circumvent technological measures employed to

control access to, or the rights in, a content file or other work protected by the copyright

laws of any jurisdiction

physical media (e g , CD, diskette, etc ), the second copy may be used for archival

purposes only and may not be transferred to or used by any other person This license

does not grant you any right to any enhancement or update

The software may include certain external software components ("Add-Ons"), including the

Lab Windows user interface and drivers You may only call to or otherwise use such Add-

Ons through the use of the JETI applications Any direct use of Add-Ons through a non-JETI

proprietary application, including a custom or user-written application is prohibited by this

Agreement

If you have purchased JETI software in connection with a JETI product, you have the right

of purchasing a software update, if it is available, for a priority price

Title, ownership, rights, and intellectual property rights in and to the software and

documentation shall remain in JETI and/or its suppliers Title, ownership rights and

intellectual property rights in and to the content accessed through the software including the

content contained in the software media demonstration files shall be retained by the

applicable content owner and may be protected by applicable copyright or other law This

license gives you no rights to such content

For the JETI operating environment, the following terms apply:

- 3 -

Operating Instructions JETI – Spectroradiometer specbos 1211

JETI warrants that for a period of ninety (90) days from the date of acquisition the software,

if operated as directed, will substantially achieve the functionality described in the

documentation JETI does not warrant however that your use of the software will be

uninterrupted or that the operation of the software will be error-free or secure JETI also

warrants that the media containing the software, if provided by JETI, is free from defects in

material and workmanship and will so remain for ninety (90) days from the date you acquire

the software

To the maximum extend permitted by applicable law JETI and its suppliers disclaim all other

warranties either express or implied including but not limited to implied warranties of

merchantability and fitness for a particular purpose with regard to the software, the

accompanying written materials and any accompanying hardware

If the media is subjected to accident abuse or improper use during the warranty period; or if

you violate the terms of this License Agreement, this warranty shall immediately terminate

This warranty shall not apply if the software is used on or in conjunction with hardware or

software other than the unmodified version of hardware and software with which the

software was designed to be used as described in the documentation

This limited warranty gives you specific legal rights

Your remedies:

JETI's sole liability for a breach of this warranty shall be in JETI's sole discretion:

(i) to replace your defective media; or

(ii) to advise you how to achieve substantially the same functionality with the software as

described in the documentation through a procedure different from that set forth in the

documentation; or

(iii) if the above remedies are impracticable, to refund the license fee, if any, you paid for

the software Repaired, corrected or replaced software and documentation shall be

covered by this limited warranty for the period remaining under the warranty that

covered the original software or if longer for thirty (30) days after the date JETI either

shipped to you the repaired or replaced software or advised you as to how to operate

the software so as to achieve the functionality described in the documentation,

whichever is applicable Only if you inform JETI of the problem with the software

during the applicable warranty period and provide evidence of the date you acquired

the software will JETI be obligated to honor this warranty

Under no circumstances and under no legal theory whether in tort contract or otherwise

shall JETI or its suppliers or resellers be liable to you or any other person for any indirect,

special, incidental or consequential damages of any character including without limitation

damages for loss of goodwill, work stoppage, computer failure or malfunction or any and all

other commercial damages or losses even if JETI shall have been informed of the possibility

of such damages or for any claim by any other party Further, in no event shall JETI´s

liability under any provision of this agreement exceed the license fee paid to JETI for the

software and documentation

This software is intended for use only with properly licensed media, content, and content

creation tools It is your responsibility to ascertain whether any copyright, patent or other

licenses are necessary and to obtain any such licenses to serve and/or create, compress or

download such media and content You agree to record, play back and download only those

materials for which you have the necessary patent, copyright and other permissions,

licenses, and/or clearances You agree to hold harmless, indemnify and defend JETI, its

officers, directors and employees, from and against any losses, damages, fines and

expenses (including attorneys' fees and costs) arising out of or relating to any claims that

you have

(a) viewed, downloaded, encoded, compressed, copied or transmitted any materials (other

than materials provided by JETI) in connection with the software in violation of another

party's rights or in violation of any law, or

(b) violated any terms of this License Agreement

This License Agreement will automatically terminate if you fail to comply with any term

hereof No notice shall be required from JETI to effect such termination

- 4 -

Operating Instructions JETI – Spectroradiometer specbos 1211

Technical support for the software, as made available by JETI, is given directly from the

JETI office in Jena, Germany

This License Agreement shall constitute the complete and exclusive agreement between

JETI, it’s resellers and the end user, notwithstanding any variance with any purchase order

or other written instrument submitted by you, whether formally rejected by JETI or not The

acceptance of any purchase order you place is expressly made conditional on your consent

to the terms set forth herein The terms and conditions contained in this License Agreement

may not be modified except in a writing duly signed by you and an authorized representative

of JETI If any provision of this License Agreement is held to be unenforceable for any

reason, such provision shall be reformed only to the extent necessary to make it

enforceable, and such decision shall not affect the enforceability of such provision under

other circumstances, or of the remaining provisions hereof under all circumstances This

License Agreement shall be governed by the laws of Germany, without regard to conflicts of

law provisions, and you hereby consent to the exclusive jurisdiction of the provincial and

federal courts sitting in Germany Any and all unresolved disputes relating in any way to, or

arising out of, the software, your use of the software or this License Agreement shall be

submitted to arbitration in Germany; except that, to the extent that you have breached or

have indicated your intention to breach this License Agreement in any manner which

violates or may violate JETI's intellectual property rights, or may cause continuing or

irreparable harm to JETI (including, but not limited to, any breach that may impact JETI's

intellectual property rights, or a breach by reverse engineering), JETI may seek injunctive

relief, or any other appropriate relief, in any court of competent jurisdiction

JETI Technische Instrumente GmH, Tatzendpromenade 2, 07745 Jena, Germany All rights

reserved

- 5 -

Operating Instructions JETI – Spectroradiometer specbos 1211

- 6 -

Operating Instructions                                     JETI – Spectroradiometer specbos 1211   
Table of Contents
Introduction 9
Installation of Driver Software 11
1 Installation of Driver Software 11
1 1 Installation under Windows XP 11
1 2 Installation under Windows Vista and Windows 7 and 
11
2 PC- Software 12
2 1 Installation under Windows 12
Operation of Device 13
1 specbos 1211 13
2 specbos 1211-BT 13
Installation of Hardware 15
1 Installation of USB Device 15
2 Installation of Bluetooth Device (specbos 1211 BT)15
3 Installation of RS Device (specbos 1211 RS) 19
4 Network settings for specbos 1211 LAN 19
5 Installing RealPort Driver 21
Start the Software 24
Measurement  26
1 Procedure 26
1 1 Measurement with specbos 1211-BT 27
1 2 Finishing the Program 29
Software Settings 30
1 Measurement Settings 30
1 1 Integration Time 30
1 2 Continuous measurement 31
1 3 Change measurement name 31
1 4 Delete Measurements 32
1 5 Calculation Range 33
2 Display Settings 33
2 1 Zoom 33
2 2 Diagram Options 34
2 3 Snap-to-Point Cursor 38
2 4 Screen Mode 38
3 Special Calculations 38
- 7 -

Operating Instructions                                     JETI – Spectroradiometer specbos 1211   
4 Snapshot 39
Data Storage 40
1 Data Transfer 40
2 Data Export 42
Shortcut Keys 44
Trigger Functions 45
Maintenance and Error Messages 46
Technical Data 47
1 Mechanical Dimensions 48
2 Battery charging (only specbos 1211-BT) 48
CE – Declaration of Conformity  50
Certificate of Warranty 51
Service 53
- 8 -

Operating Instructions JETI – Spectroradiometer specbos 1211

1. Introduction

specbos 1211 is an easy to use spectroradiometer for various

applications Its miniaturized shape makes it suitable for laboratory

as well as industrial use The spectroradiometer specbos 1211 can

measure luminance/ radiance as well as illuminance/ irradiance

Furthermore colorimetric data (CCT, chromaticity, color purity,

dominant wavelength, CRI) are calculated from the spectral data

Therefore it is suited for the test of light sources as CRT screens, for

the measurement of projectors and of room illuminance

specbos 1211 covers the wavelength range of 350 … 1000 nm and

is suitable for low light measurements due to its high sensivity

The version specbos 1211 UV extends the wavelength range to 250

The indication of the measuring spot on the target in case of

luminance/ radiance measurements will be proceeded with a pilot

laser circle Irradiance measurements are done with a cosine

corrector head-piece The software switches automatically to the

appropriate measuring mode depending from the attached

measuring head

Acquisition and analysis of data is done by the PC software JETI

LiMeS The connection to the PC is via USB interface (virtual COM

port) It is also possible to communicate directly with the instrument

without the PC program Virtual Instruments for LabView are

contained on the CD as well as radiometric and spectrometric DLLs

Detailed helping information for both applications is included

Furthermore the instrument can be driven by the SCPI compatible

firmware commands The command list is also available on the CD

specbos 1211 is available with additional interfaces:

Serial interface specbos 1211 RS232

Bluetooth interface specbos 1211 BT

PC requirements:

•Pentium 4 / AMD Athlon XP or higher, min 512 MB RAM

•Graphic resolution: 1024*768, 16 bit color depth

recommended

•Windows XP (SP3); Vista or Windows 7, Windows 8; Excel

2000 (for data transfer)

- 9 -

Operating Instructions JETI – Spectroradiometer specbos 1211

The specbos 1211 packages includes:

•Basic device specbos 1211 with protection cap

•Cosine corrector head-piece

•Operating instructions

•Tripod

•Transport box

•CD-ROM with PC software JETI LiMeS, DLLs, LabView Virtual

Instruments, operating instructions and firmware command list

•USB cable

•Trigger connector

additionally:

specbos 1211 BT

•Bluetooth antenna, bluetooth adapter and a rechargeable

lithium polymer battery EasyPack 3 7V (EZPack XL)

specbos 1211 RS

•serial cable

•Power supply 9V

specbos 1211 LAN

•Power supply 5V

- 10 -

Tabla de contenidos

Otros manuales de Instrumento de medición de Jeti

Jeti

Jeti spectraval 1501 Manual de usuario

Jeti

Jeti specbos 12 1 Series Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario

Jeti specbos 1211 Manual

Manuales populares de Instrumento de medición de otras marcas