Jensen Lynx 9000 Manual de usuario
Lynx 9000 user manual
version 1.0 - November 2016 - © Jensen of Scandinavia AS
Get to know your LYNX 9000
Connecting your LYNX 9000
Connect devices to your LYNX 9000
No internet connection?
Connect to a wireless network in Windows 10
Connect to a wireless network in Mac OS X
Connect to a wireless network using Android
Connect to a wireless network using iOS (iPhone)
How to improve your wireless network
How to change settings on your LYNX 9000 router
How do I change the channel on the wireless network?
How do i change the name of the wireless network?
How do i change password for the wireless network?
How to setup guest network
How to setup internet filter
How to setup the scheduler
How to upgrade firmware
How do I reset the router?
Frequently asked questions
Where can I get more help?
Content page
Congratulations on your choice of Jensen LYNX 9000.
In this manual you will find information on basic setup of LYNX 9000, like
internet connection, router placement, changing of the the channel and password
on the wireless network etc., as well as useful tips and information on how to get
the wireless network to function as good as possible.
If there is any questions not addressed in this manual simply contact us via
contact details found on last page.
Page 2
3
4
5
6
7
8
9
10
11
15
16
17
18
19
20
21
23
24
25
26
Page 3
Get to know your LYNX 9000
A. Power input
B. On/Off switch
C. LAN ports. For connecting PC, TV setup box, Playstation, XBOX etc.
D. Internet port. For connecting internet modem.al du koble kabel fra internettmodemet.
E. USB 2.0 and USB 3.0 port connecting USB hard drive.
F. Reset button
G. WPS button
H. Antennas for wireless network
I. Wall mounting point
RESET WPS
A B C D E F G
H
I
Power ON/OFF LAN 4 LAN 3 LAN 2 LAN 1 Internet USB 2 USB 1
Page 4
Connecting your LYNX 9000
In order for the internet connection to work properly it’s important that you connect
it to your broadband connection correctly.
Please note! If you have problem getting internet access with the LYNX 9000 we recommend
you to try the instructions on page 6.
A) Connect the enclosed power adapter to port marked Power.
B) Turn the router on by press ON/OFF button.
C) Connect the enclosed network cable from your broadband connection (internet modem) to the
blue Internet port.
AC
Power ON/OFF LAN 4 LAN 3 LAN 2 LAN 1 Internet USB 2 USB 1
B
Internet modem
Power
RESET WPS
Page 5
Connect devices to your LYNX 9000
A. Wireless connection:
LYNX 9000 is a dual-band router, which means it transmit two wireless networks (2.4GHz and 5Ghz).
Most type of devices (PC, smart phone etc.) support 2.4Ghz wireless network, but not necessarily
5GHz. If your device only support 2.4Ghz you will only see one of the two wireless networks.
On the back of LYNX 9000 you will find the name (1) and password (2) for the wireless networks.
The name and password for your LYNX 9000 are unique.
The blow label is only an example:
B. Wired connection:
Devices needed to be connected by network cable can be connected to yellow ports
marked LAN 1, 2,3 or 4.
Power ON/OF F LAN 4 LAN 3 L AN 2 LAN 1 Internet US B 2 USB 1
RESET WPS
A
B
X
Page 6
No internet connection?
If you have connected the modem to your LYNX 9000 router the way as described on page 4 and still won't
get an internet connection, it could be because of the way the internet modem is set up.
In some cases the internet modem is set to only deliver one IP-address, and in that kind of situation the
LYNX 9000 will not get an IP-address from the internett modem.
This happens most commonly in cases when internet is delivered trough Cable-TV.
We recommend that you do the following:
Disconnect the power from both the LYNX 9000 and the
internet modem and wait for 10 seconds
Make sure the cable from the modem is connected to
the internet port labeled INTERNET
Connect the power to the LYNX 9000 and wait 1 minute
before proceeding.
Connect the power to the internet modem and wait until the
modem has connected itself to the service provider
(about 1-2 minutes)
Connect the computer (or the device you wish to use)
to the LYNX 9000 either wirelessly or with cable in
the ports 1, 2, 3, or 4
If you decide to connect wirelessly, you will find the
network name (SSID) and password under the router.
1
2
3
4
5
Strømkabel
Internet modem
Strømkabel
Internet modem
Strømkabel
Nettverkskabel
Internet modem
Strømkabel
Nettverkskabel
Strømkabel
Strømkabel
Internet modem
Strømkabel
Nettverkskabel
Strømkabel
11
2
2
3
3
4
1
2
5
3
4
2
1. Click the icon for wireless network on the system tray and then
Network setings
2. You will now see a list of available wireless networks in your area.
Select your wireless network from the list and click Connect.
The name of your router can be found under your router.
3. Please enter the encryption key for your Jensen router and click Next.
The encryption key can be found on top or under the router.
The key is 8 digit with a mix of lower / upper case letters and numbers.
4. Please select if you wish to activate sharing of files between devices
in your network.
5.The PC is now connected to the wireless network.
If there are several AirLink routers in your neighbourhood,
it can be several AirLink routers on the list that look similar
Be carefull to select the AirLink router that matches the
network name of your router.
Page 7
Connect to a wireless network in Windows 10
1. Click on the Wireless network icon in right upper corner.
You will now see a list of available wireless network in your area.
Select your AirLink router by clicking on the network name.
The network name of your AirLink router can be found under your router.
2. Enter the encryption key for your AirLink router and click Join.
The encryption key can be found on top or under the router.
The encryption key is a mix of lower / upper case letters and numbers.
3. The Mac is now connected to the wireless network.
1
2
23
If there are several AirLink routers in your neighbourhood,
it can be several AirLink routers on the list that look similar
Be carefull to select the AirLink router that matches the
network name of your router.
Page 8
Connect to a wireless network in Mac OS X
1. Click Settings
2. Click Connections -> WiFi
3. You will now see a list of available wireless networks.
Select your wireless network from the list by click the name of it.
4. Enter the password/encryption of the wireless network and
click Connect.
5. Your Android device should now be connected.
2
23
24
25
1
Page 9
Connect to a wireless network using Android
Android
1. Click Settings
2. Click Wi-Fi
3. You will now see a list of available wireless networks.
Select your wireless network from the list by click the name of it.
4. Enter the password/encryption of the wireless network and
click Connect.
5. Your iOS device should now be connected.
2
23
24
25
1
Page 10
Connect to a wireless network using iOS (iPhone)
iOS (iPhone)
Tabla de contenidos
Otros manuales de Enrutador inalámbrico de Jensen
