JEKKO SPX532 Manual de usuario
1
SPX532 – QUICKSTART GUIDE
REVISION
1
ISSUED BY
ENRICO P.
DATE OF RELEASE
13/03/2020
REVISIONED BY
IGOR P.
DATE OF REVISION
13/03/2020
APPLIED TO
MODELS
SPD-SERIES
SPD265
SPD360
SPD500
JF-SERIES
JF30 JF40 JF365 JF545 JF990
SPX-JUNIOR
SPB209 SPX312 SPX424 SPX429
SPX-SENIOR
SPX527 SPX536 SPX1040 SPX1275
MPK-SERIES
MPK20 MPK50
NEW SERIE
SPX532 SPX1280
OTHERS
SPK 60 OTHER TOOLS INSTRUMENT
SPX532
Quickstart Guide
2
SPX532 – QUICKSTART GUIDE
INDEX
1. TURN ON THE POWER ....................................................................................................................................................................................... 3
2. RELEASE THE EMERGENCY BUTTON ................................................................................................................................................................... 4
3. POWER UNIT SELECTION.................................................................................................................................................................................... 5
4. TURN ON THE REMOTE CONTROL ...................................................................................................................................................................... 6
5. START/STOP DIESEL ENGINE (OR POWER PACK)................................................................................................................................................. 7
6. CONFIRM LMI CONFIGURATION ........................................................................................................................................................................ 8
7. MODIFY LMI CONFIGURATION........................................................................................................................................................................... 9
8. WORKING MODE SELECTION ............................................................................................................................................................................11
9. TRACKS ............................................................................................................................................................................................................13
10. OUTRIGGERS UP & DOWN ................................................................................................................................................................................16
11. CRANE..............................................................................................................................................................................................................23
12. PICK & CARRY...................................................................................................................................................................................................26
13. MACHINE STABILITY (NO FUNCTIONS AVAILABLE) ............................................................................................................................................30
14. ENGINE POWER MODE SELECTOR .....................................................................................................................................................................32
15. WINCH SPEED REDUCTION SELECTOR ...............................................................................................................................................................33
16. CRANE SPEED REDUCTION SELECTOR................................................................................................................................................................34
17. ALARMS & WARNINGS .....................................................................................................................................................................................35
3
SPX532 – QUICKSTART GUIDE
1. TURN ON THE POWER
Go to the right side of the machine’s central frame, where the
main switch is placed.
On the right side panel there are the following devices:
•main power switch (1);
•main power led indicator (2);
•emergency button (3);
•power unit switch selector (4);
•hour counter (5).
Turn on the Main power switch to energize the machine (the Main
power led indicator will turn on).
RIGHT SIDE PANEL
4
SPX532 – QUICKSTART GUIDE
2. RELEASE THE EMERGENCY BUTTON
Check and release the emergency button on the right side panel of the
machine.
Check and release the emergency button on the remote control.
5
SPX532 – QUICKSTART GUIDE
3. POWER UNIT SELECTION
By rotating the Power unit switch selector (located on right side panel) it will be possible to engage
the desired power unit:
*if power pack is present.
SPX532CL version
SPX532CDH version
LITHIUM BATTERY PACK
POWER PACK *
DIESEL ENGINE
POWER PACK *
6
SPX532 – QUICKSTART GUIDE
4. TURN ON THE REMOTE CONTROL
Turn on the remote control key.
Press once the Start button on the left side of the remote control
and wait for “Loading HMI …” (about 5 sec.)
When requested on the screen, press again the Start button and wait for
“Configuring Radio”.
7
SPX532 – QUICKSTART GUIDE
5. START/STOP DIESEL ENGINE (OR POWER PACK)
To start the diesel engine on SPX532CDH version (or the power pack electric motor), use the Engine
start/stop selector on the remote control:
START DIESEL ENGINE / POWER PACK
TURN OFF DIESEL ENGINE / POWER PACK
OR PRE-HEAT THE PLUGS (IF DIESEL ENGINE IS SELECTED AND IS OFF)
NOTE FOR SPX532CL MODEL ONLY:
The lithium battery pack power unit doesn’t need to be started/stopped using the Engine selector:
as soon as one or more functions are operated from the remote control, the electric motor is
activated and the pump starts/stops running automatically.
8
SPX532 – QUICKSTART GUIDE
6. CONFIRM LMI CONFIGURATION
The LMI configuration page will be displayed automatically (see
the picture beside).
Press the button (on top of the screen to the right) to confirm the LMI
configuration.
IMPORTANT:
Always check the congruity between the LMI configuration on the display and the real
configuration of the machine!
Once the LMI settings are confirmed, the LMI icon on top of the
screen will become green:
LMI CONFIGURATION CONFIRMED
LMI CONFIGURATION NOT CONFIRMED
9
SPX532 – QUICKSTART GUIDE
7. MODIFY LMI CONFIGURATION
Only if needed, use the Line falls selector to modify the LMI configuration and set the correct
number of rope lines/falls or the hook mode:
INCREASE THE ROPE LINE FALLS NUMBER
PRESS ONCE TO GO BACK TO HOOK MODE IMMEDIATELY
7.1. LMI possible configurations
NOTE:
The machine recognizes automatically the tool installed, thanks to the Plug&Play feature.
The operator is responsible to properly set the rope line falls or hook mode.
MAIN BOOM:
Hook mode
1 line
2lines
3 lines
4 lines
JIB1000.2HL1MX:
Hook mode
1 line
10
SPX532 – QUICKSTART GUIDE
7.2. SELECTION JIB ON BOARD
From LMI configuration page it is possible to select jib
on board by pressing Button 3.
Jib on board icon legend
JIB PARKED ON BOARD: the LMI takes in count
the weight of the jib parked on the boom
JIB NOT ON BOARD: the LMI doesn’t take in
count the weight of the jib
NOTE:
On SPX532 the counterweight is not removable!
Tabla de contenidos
Otros manuales de Equipos de construcción de JEKKO
