JCM GLOBAL WBA Series Manual de usuario

Maintenance Manual

WBA Series

Version: 2.0 05.2007

Maintenance Manual WBA Series

QA-IF006 R02E Wartungsanleitung WBA_newLogo.doc

Japan Cash Machine Germany GmbH Page 2 of 16

Contents

1. PARTS (BILL ACCEPTOR)....................................................................................................................... 3

2. GENERAL INFORMATION ON MAINTENANCE AND CLEANING ............................................... 4

3. DETERGENTS............................................................................................................................................. 5

YOU SHOULD USE............................................................................................................................................ 5

WHAT YOU SHOULD NOT USE!........................................................................................................................ 5

4. MAINTENANCE- AND CLEANING INTERVALS................................................................................ 5

CLEANING WITH THE JCM CLEANING CARD .................................................................................................. 7

THOROUGH CLEANING AND CHECKING IS RECOMMENDED EVERY EIGHT TO TWELVE MONTHS.................... 8

5. ADJUSTMENT........................................................................................................................................... 10

QUICK ADJUSTMENT..................................................................................................................................... 11

PC SUPPORTED ADJUSTMENT........................................................................................................................ 12

6. ACCESSORIES.......................................................................................................................................... 15

7. NEWEST SOFTWARE / UPDATES........................................................................................................ 15

8. WHAT YOU SHOULD DO WHEN THE ACCEPTOR IS MALFUNCTIONING............................. 16

Maintenance Manual WBA Series

QA-IF006 R02E Wartungsanleitung WBA_newLogo.doc

Japan Cash Machine Germany GmbH Page 3 of 16

1. Parts (Bill Acceptor)

Fig. 01

DIP Switch

Maintenance Manual WBA Series

QA-IF006 R02E Wartungsanleitung WBA_newLogo.doc

Japan Cash Machine Germany GmbH Page 4 of 16

2. General information on maintenance and cleaning

Bill validators, or acceptors, scan currency using optical and magnetic sensors. Upon

validation, different bill properties are compared to internal reference values. If the item is

accepted, it is retained by the machine and gets placed into the cash box. If the acceptor

detects the bill as counterfeit, the piece of currency is rejected by the validator.

One has to keep in mind, that the acceptor performs best when its components are clean

and undamaged. Any dirt or damages can potentially reduce the acceptance rate of the

validator.

Generally, the intervals at which the acceptor needs to be cleaned at, depend on different

factors. These include, for example, the direct environment surrounding the validator, its

application area, and its degree of utilization.

Machines that are placed in dusty areas, or smoking areas, should therefore be cleaned

relatively often.

There is no general rule as too how many times the acceptor should be cleaned, as it

depends on the surroundings of the acceptor.

Maintenance Manual WBA Series

QA-IF006 R02E Wartungsanleitung WBA_newLogo.doc

Japan Cash Machine Germany GmbH Page 5 of 16

3. Detergents

You should use

A soft, non-fluffy cloth ( eg: cotton or microfibre)

Cotton buds

A mild detergent (basic). The cloth/cotton buds can be dampened but make sure

no water is going inside the acceptor. The driving belts and the wheels can be

cleaned with Isopropanol. Please avoid any contact between the lenses and

alcohol or other solvents.

An alternative way of cleaning, would be using our JCM cleaning cards. These

cleaning cards are designed specifically for cleaning on site. It needs to be

mentioned however, that those cards do not replace thorough cleaning.

JCM Ceaning Card

What you should not use!

Hard or pointy items should not be used when cleaning. They can scratch the lenses.

Do not use solvents like petrol or spirit! These can lead to cloudy optical lenses.

Do not clean with compressed air.

4. Maintenance- and Cleaning intervals

The head unit should be cleaned every two to three months. (Fig. 02). This applies to general

cleaning. Under unfavourable circumstances the head unit should be cleaned more often.

dirty lenses and roller

clean lenses and roller

Maintenance Manual WBA Series

QA-IF006 R02E Wartungsanleitung WBA_newLogo.doc

Japan Cash Machine Germany GmbH Page 6 of 16

Procedure:

Clean thoroughly all lenses, wheels and driving belts (note yellow marked areas)

and check the head unit for potential damages.

Fig. 02

Example for contaminations

Fig. 03 Fig. 04

Open the head unit by pulling at both

locks at once.

Maintenance Manual WBA Series

QA-IF006 R02E Wartungsanleitung WBA_newLogo.doc

Japan Cash Machine Germany GmbH Page 7 of 16

Cleaning with the JCM Cleaning card

The JCM cleaning card is a preventative tool, that is designed to reduce contaminations and

paper abrasion. Optimum functionality is ensured between the regular cleaning intervals.

Fig. 05

Procedure:

1. Make sure the machine is switched on, and does not malfunction.

2. Remove the cleaning card from its packaging and insert it into the acceptor, like a

normal bill.

3. The cleaning card is accepted and rejected.

4. Repeat the process.

5. At the last turn, when the bill validator accepts the bill and tries to place it into the

cash box, hold on tight to the cleaning card, so that the driving belts get cleaned.

6. After having used the cleaning card, make sure to through it away.

Package of cleaning card

Cleaning Card

Maintenance Manual WBA Series

QA-IF006 R02E Wartungsanleitung WBA_newLogo.doc

Japan Cash Machine Germany GmbH Page 8 of 16

Thorough cleaning and checking is recommended every eight to twelve months.

The intervals are shorter under unfavourable conditions.

Procedure:

1. Remove the head as well as the carrying unit (fig 06 and 07)

Fig. 06 Fig. 07

2. Check for any superficial damages

Again check for damages in the cog wheels etc. Damaged parts need to be

changed. The acceptor can also be sent to JCM-G.

Maintenance Manual WBA Series

QA-IF006 R02E Wartungsanleitung WBA_newLogo.doc

Japan Cash Machine Germany GmbH Page 9 of 16

3. Cleaning

Make sure the interior of the head and carrying unit is thoroughly cleaned.

(siehe Fig. 08 und 09)

Dust and dirt need to be removed, too!

Fig. 08

Additional procedures

Testing and cleaning!

NB:

The belts need to be cleaned the

whole way through. They can be

moved by hand.

Fig. 09

Maintenance Manual WBA Series

QA-IF006 R02E Wartungsanleitung WBA_newLogo.doc

Japan Cash Machine Germany GmbH Page 10 of 16

The acceptance rate can become worse as time goes by. This may not only result

in because of the acceptor’s direct environment, but also because the parts are

getting older.

If the acceptance rate is still low after cleaning the acceptor, and no mechanical

problems are obvious, the sensors may need to be callibrated.(fig 5.).

In the unlikely event of continued malfunction please write down the

1. name of the product

2. serial number

3. Software Version

4. LED Blink Codes

and contact our Customer Support

5. Adjustment

There are two kinds of adjustment => Quick adjustment und PC supported adjustment

Please note !

Please note the settings of the dipswitch, so that they can be repositioned to their

original settings, after the adjustment.

An adjustment is only possible if:

- the machine was cleaned!

- the head unit and the carrying unit are inserted and the acceptor is plugged in

- the face plate was removed.

Different accessories are needed in order to successfully carry out an adjustment

(details fig 6. accessories).

The adjustment paper is specifically fitted to the model and the width of the head

unit.

We therefore kindly ask you to check which adjustment paper you are using!

The adjustment is only possible if the adjustment paper is clean and undamaged.

Please handle the paper carefully, put it in a plastic bag, and store it in a lightproof

area.

Tabla de contenidos

Otros manuales de Validador de billetes de JCM GLOBAL

JCM GLOBAL

JCM GLOBAL UBA Pro Series Manual de usuario

JCM GLOBAL

JCM GLOBAL RDM-100 Series Guía de configuración rápida

JCM GLOBAL

JCM GLOBAL iVIZION2 Series Guía de configuración rápida

JCM GLOBAL

JCM GLOBAL TBV-100 FSH Manual de usuario

JCM GLOBAL

JCM GLOBAL TBV Series Guía de configuración rápida

JCM GLOBAL

JCM GLOBAL VEGA Series Manual de usuario

JCM GLOBAL

JCM GLOBAL Taiko PUB-7 Manual de usuario

JCM GLOBAL

JCM GLOBAL DBV Series Guía de configuración rápida

Manuales populares de Validador de billetes de otras marcas

Alberici

Alberici BILLYONE UN1 Manual de usuario

Kolibri

Kolibri Bishop Manual de usuario

Royal Sovereign

Royal Sovereign RCD-2000 Manual de usuario

Innovative Technology

Innovative Technology BV100 Manual de usuario

Innovative Technology

Innovative Technology NV4 Manual de usuario

Innovative

Innovative NV200 Manual de usuario

Inves

Inves Secureuro Plus Manual de usuario

ICT

ICT Bill Validator S7 Series Manual de usuario

Kolibri

Kolibri Domino Manual de usuario

CUMMINS ALLISON

CUMMINS ALLISON JetScan Manual de usuario

Hamilton

Hamilton XE Guía de inicio rápido

CashCode

CashCode AMZ-154 Manual de usuario

Innovate Technology

Innovate Technology NV10 Manual de usuario

JCM

JCM iVIZION Manual

Innovative Technology

Innovative Technology NV10 Family Manual de usuario

Amrotec

Amrotec MIB-11F Manual de usuario

Crane

Crane NRI G-13.mft Standard Manual de usuario

CASH TECHNOLOGY

CASH TECHNOLOGY CCE 20 Manual de usuario