Jbc RWS-A Manual de usuario

中文 19

Deutsch 13

Español 7

PHS Rework Adjustable Arm

Ref. RWS-A

English 2

Page

www.jbctools.com

Packing List

The following items should be included:

Tool Arm ...................................................... 1 unit

Adapters ...................................................... 1 unit

Ref. 0017058 (for JT-TA Heater)

0017059 (for TE-TB Precision Heater)

Base .............................................................. 1 unit

Screw ........................................................... 1 unit

Ref. 0017057

Allen key ...................................................... 1 unit

Ref. 0013609

Manual ......................................................... 1 unit

Ref. 0017489

Ref. RWS-A

PHS Rework Adjustable Arm

www.jbctools.com

IR Preheater Support

Ref. PHS-SA

to Hot Air stations

ESD safe connector

Ideal for working with JBC’s Hot Air stations and a Preheater, especially the PHS-KB.

Features

Hose ClampTurn the lever to lower the tool Vertical axis with ruler

When you have finished

raise the tool to free up the

workspace.

www.jbctools.com

Height Adjustment

The RWS-A Arm allows adjustment for

different heights according to your work needs

through the vertical axis rule.

Slide the tool holder to the appropriate height

and secure by tightening the lower knob to

guarantee stability. Make sure the upper knob is

loosened before sliding the tool holder.

Assembly

Fit the tool arm onto the base and tighten the

screw.

Slide the adapter along the hose to the end of

the handle.

1. Setting up the Tool Arm

3. Mounting the Tool 4. Place the hose in the clamp.

2. Inserting the Adapter (JT/TE)

Adapter

Insert the tool as far as possible.

Allen key

Lower knob

Upper knob

Work Position Adjustment

The RWS-A arm allows adjustment for different positions according to your work needs.

The articulated arm covers all work areas.

Position the arm and tighten the knobs.

Top view

Maintenance

- Check periodically that the RWS-A is clean,

especially the sliding parts and the shaft.

- Use a damp cloth when cleaning. Alcohol

can only be used to clean the metal parts.

- Replace any defective or damaged parts.

Use original JBC spare parts only.

- Repairs should only be performed by a

JBC authorized technical service

Keep the sliding

parts clean

www.jbctools.com

It is imperative to follow safety guidelines to prevent electric shock, injury,

fire or explosions.

Safety

- Do not use the equipment for any purpose other than PCB rework. Incorrect use may cause fire.

- The temperature of accessible surfaces may remain high after the unit is turned off. Handle with care.

- Be careful with the fumes produced when soldering.

- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when

working to avoid personal harm.

- Utmost care must be taken with liquid tin waste which can cause burns.

- This appliance can be used by children over the age of eight as well as persons with reduced

physical, sensory or mental capabilities or lacking experience provided that they have been given

adequate supervision or instruction concerning use of the appliance and understand the hazards

involved. Children must not play with the appliance.

- Maintenance must not be carried out by children unless supervised.

Specifications

-Total weight: 5 kg (11.02 lb)

- Base dimensions: 270 x 400 mm (10.63 x 15.75 in)

- Height: 386,5 mm (15.21 in)

- Arm lenght: 444,5 mm (17.50 in)

- ESD safe connector

Complies with CE standards

ESD protected housing “skin effect”

Brazo Rework para PHS

Ref. RWB-A

www.jbctools.com

Composición

Los siguientes artículos deben estar incluidos:

Tool Arm

Soporte de herramienta ....................... 1 unidad

Adapters

Adaptadores .......................................... 1 unidad

Ref. 0017058 (Para herramienta JT-TA)

0017059 (Para herramienta TE-TB)

Manual ................................................... 1 unidad

Ref. 0017489

Base ........................................................ 1 unidad

Screw

Tornillo ..................................................... 1 unidad

Ref. 0017057

Allen key

Llave Allen .............................................. 1 unidad

Ref. 0013609

Ref. RWS-A

PHS Rework Adjustable Arm

www.jbctools.com

Ideal para trabajar con las estaciones de aire caliente y los precalentadores de JBC, en particular el

Precalentador PHS-KB.

Características

IR Preheater Support

Soporte para Precalentador IR

Ref. PHS-SA

a estaciones de

aire caliente

Conector de seguridad

ESD

Abrazadera para la mangueraTire hacia abajo para trabajar Eje vertical con regla

When you have finished

raise the tool to free up the

workspace.

www.jbctools.com

Ajuste de altura

El brazo RWS-A permite ajustar diferentes

alturas en función de cada necesidad de

trabajo gracias a la regla del eje vertical.

Es necesario ﬁjar el brazo con el pomo de

ﬁjación inferior, que garantiza la estabilización

del mismo. Asegúrese que antes de regular la

altura, el pomo superior esté aﬂojado.

Montaje

Haga encajar el soporte de la herramienta con la

base y atornille con una llave Allen.

Deslice el adaptador a lo largo del mango hasta

el ﬁnal del mismo.

1. Coloque el soporte de herramienta

3. Coloque la herramienta 4. Pase la manguera por la abrazadera

2. Coloque el adaptador (JT/TE)

Adaptador

Coloque la herramienta empujando hacia abajo,

hasta que el adaptador tope con la corredera.

Llave Allen

Pomo inferior

de ﬁjación

Pomo superior

de ﬁjación

Tabla de contenidos

Idiomas:

Manuales populares de Estación de retrabajo de otras marcas

aoyue

aoyue Int968 Manual de usuario

Duratool

Duratool D03329 Manual de usuario

Tenma

Tenma SS-952C-F Series Manual de usuario

Weller

Weller WR 2 Manual de usuario

Velleman

Velleman VTSS200 Manual de usuario

Bungard

Bungard HOT AIR 3000 Manual de usuario

Seamark ZM

Seamark ZM ZM-R380B Manual de usuario

STAMOS

STAMOS S-LS-10 Manual de usuario

Keter

Keter JOBMADE Manual de usuario

Pace

Pace TF 1700 Manual de usuario

Kurtz Ersa

Kurtz Ersa HR 500 Manual operacional

Quick

Quick 861DW Manual de usuario

ELCART

ELCART 07/00910-00 Manual de usuario

Metcal

Metcal MX500 Manual de usuario

Hakko Electronics

Hakko Electronics FR-811 Manual de usuario

Quick

Quick BGA2100 Manual de usuario

Velleman

Velleman VTSSD4 Manual de usuario

Rebel TOOLS

Rebel TOOLS LUT0085 Manual de usuario

jbc RWS-A Manual de usuario

Manuales populares de Estación de retrabajo de otras marcas