JB Systems COB-4BAR Manual de usuario

ENGLISH USER MANUAL

JB SYSTEMS®1/16 COB-4BAR

OPERATION MANUAL

Thank you for buying this JB SYSTEMS®product. To take full advantage of all possibilities and for your own

safety, please read these operating instructions very carefully before you start using this unit.

FEATURES

This unit is radio-interference suppressed. This product meets the requirements of the current European and

national guidelines. Conformity has been established and the relevant statements and documents have been

deposited by the manufacturer.

This device was designed to produce decorative effect lighting and is used in light show systems.

Stylish and compact powered 4BAR containing 4 energy saving COB LED-projectors

NO separate LEDs: each projector contains a 36W COB LED with perfect color mixing and the look of a

traditional lamp !

Exceptional high light output (exceeding the output of traditional PAR56 300W lamps !)

IR-remote controller included: no difficult controllers needed, perfect for DJs !

Equipped with 2 extra mains sockets, each with remote on/off control: any (LED) effect up to 500W can be

connected !

Different working modes:

Standalone with IR-remote: automatic / beat synchronized color patterns + on/off control of 2 (optional)

effect lights

Master/slave mode: several bars can be used together for wonderful preprogrammed, music

synchronized lightshows.

Can be controlled by our famous LEDCON-02 Mk2, LEDCON-XL or the optional “COB-4BAR

FOOTCONTROL” remote.

DMX-controlled: different channel modes with program selection and individual RGB control.

LED-Projector beam angles = 15° with lens / 100° without lens

Perfect for mobile applications: only 1m long and weighs only 8kg !

Many applications possible: Discotheques, DJs, rental companies, ...

0-100% dimming and ultra-fast strobe function (no additional strobes needed!)

Excellent built-in programs for wonderful, ever changing, light shows!

Optional foot controller available: perfect for small music bands!

Special USB-connection for use with an optionally available Wireless DMX-dongle.

Backlit alphanumeric 2x 16character LCD-display for easy menu navigation.

Standard 35mm pole adapter included.

A light but strong case for easy transport is included with the 4BAR.

BEFORE USE

Before you start using this unit, please check if there’s no transportation damage. Should there be any, do

not use the device and consult your dealer first.

Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary

for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused

by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects

or problems caused by disregarding this user manual.

Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user

manual.

Check the contents:

Check that the packing contains the following items:

Operating instructions

COB-4BAR

Wireless remote control

Power Cable

Flight-Case

2 spare IEC plugs for the extra effect power outputs

ENGLISH USER MANUAL

JB SYSTEMS®2/16 COB-4BAR

SAFETY INSTRUCTIONS:

To protect the environment, please try to recycle the packing material as much as possible.

To prevent fire or shock hazard, do not expose this appliance to rain or moisture.

To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when

bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full

performance or may even cause damages.

This unit is for indoor use only.

Don’t place metal objects or spill liquid inside the unit. Electric shock or malfunction may result. If a foreign

object enters the unit, immediately disconnect the mains power.

Locate the fixture in a well ventilated spot, away from any flammable materials and/or liquids. The fixture

must be fixed at least 50cm from surrounding walls.

Don’t cover any ventilation openings as this may result in overheating.

Prevent use in dusty environments and clean the unit regularly.

Keep the unit away from children.

Inexperienced persons should not operate this device.

Maximum safe ambient temperature is 40°C. Don’t use this unit at higher ambient temperatures.

Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging

and servicing.

Allow the device about 10 minutes to cool down before to start servicing.

Always unplug the unit when it is not used for a longer time or before to start servicing.

The electrical installation should be carried out by qualified personal only, according to the regulations for

electrical and mechanical safety in your country.

Check that the available voltage is not higher than the one stated on the unit.

The power cord should always be in perfect condition. Switch the unit immediately off when the power cord

is squashed or damaged. It must be replaced by the manufacturer, its service agent or similarly qualified

persons in order to avoid a hazard.

Never let the power-cord come into contact with other cables!

This fixture must be earthed in order to comply with safety regulations.

Don’t connect the unit to any dimmer pack.

Always use an appropriate and certified safety cable when installing the unit.

In order to prevent electric shock, do not open the cover. There are no user serviceable parts inside.

Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the same

type and electrical specifications!

In the event of serious operating problems, stop using the fixture and contact your dealer immediately.

CAUTION: To reduce the risk of electric shock, do not remove

the top cover. No user-serviceable parts inside. Refer servicing

to qualified service personnel only.

The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the

use or the presence of un-insulated “dangerous voltage” within the product’s enclosure that may

be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within the equilateral triangle is intended to alert the user to the presence

of important operation and maintenance (servicing) instructions in the literature accompanying

this appliance.

This symbol means: indoor use only

This symbol means: Read instructions

This symbol means: Safety Class I appliance

This symbol determines: the minimum distance from lighted objects. The minimum distance

between light-output and the illuminated surface must be more than x meters

The device is not suitable for direct mounting on normally flammable surfaces. (suitable only for

mounting on non-combustible surfaces)

CAUTION: Do not stare at operating lamp.

May be harmful to the eyes.

ENGLISH USER MANUAL

JB SYSTEMS®3/16 COB-4BAR

The housing and the lenses must be replaced if they are visibly damaged.

Please use the original packing when the device is to be transported.

Due to safety reasons it is prohibited to make unauthorized modifications to the unit.

Important: Never look directly into the light source! Don’t use the effect in the presence of persons suffering

from epilepsy.

DESCRIPTION:

1. DMX INPUT: 3pin male XLR-connector used to connect the COB-4BAR with the DMX controller or with

the previous unit in the DMX chain.

2. DMX OUTPUT: 3pin female XLR-connector used to connect the COB-4BAR with the next unit in the

DMX chain.

3. FOOT CONTROLLER INPUT: here you can connect the optional foot controller

4. DISPLAY shows the various menus and the selected functions.

5. MODE button: used to browse the different functions in the menu

6. ENTER button: used to confirm your choice or to enter the setup mode of a function.

7. UP button: to increase the values shown on the display.

8. DOWN button: to lower the values shown on the display.

9. Mains input: with IEC socket and integrated fuse holder, connect the supplied mains cable here..

10. Mains output with IEC socket: you can use a special IEC power cable to connect this output with the

mains input of the next bar or projector for easier linking.

Important note:the total maximum load may NOT exceed 10A (±2300 Watt) !

11. 35mm STAND ADAPTER: used to put the 4bar easily on top of a light stand

12. Extra Power Output 1: this output can be used to power an extra light effect or projector. In the menu of

the 4BAR you can choose if the power should be continuously ON or if it should be possible to switch the

power ON/OFF via DMX / wireless control / foot switch.

Important note:the maximum load may NOT exceed 3A (±690 Watt) !

13. Extra Power Output 2: this output can be used to power an extra light effect or projector. In the menu of

the 4BAR you can choose if the power should be continuously ON or if it should be possible to switch the

power ON/OFF via DMX / wireless control / foot switch.

Important note:the maximum load may NOT exceed 3A (±690 Watt) !

14. Special cables with power signal for the passive COB panels

15. Passive COB panels: each containing 1 RGB COB led producing colorful sharp 15° beams.

16. Removable 15° lens: each of the COB panels is equipped with a 15° lens that can be removed by

unscrewing the 2 screws that keep it in place. Without the lens the projectors have a beam angle of 100°

which makes the unit perfect as wash projector for all kinds of applications.

17. Sliding mechanism: can be used to add an extra small light effect or projector. You can also fix 2

(optional) mounting clamps on the sliding mechanism to easily mount the bar in your truss.

ENGLISH USER MANUAL

JB SYSTEMS®4/16 COB-4BAR

18. W-DMX DONGLE INPUT: this USB-input can be used to connect an (optionally available) wireless

DMX-dongle. With this dongle you can control the projector via wireless DMX.

OVERHEAD RIGGING

Important: The installation must be carried out by qualified service personal only. Improper

installation can result in serious injuries and/or damage to property. Overhead rigging requires

extensive experience! Working load limits should be respected, certified installation materials

should be used, the installed device should be inspected regularly for safety.

Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging

and servicing.

The device should be installed out of reach of people and outside areas where persons may walk by or be

seated.

Before rigging make sure that the installation area can hold a minimum point load of 10times the device’s

weight.

Always use a certified safety cable that can hold 12times the weight of the device when installing the unit.

This secondary safety attachment should be installed in a way that no part of the installation can drop

more than 20cm if the main attachment fails.

The device should be well fixed; a free-swinging mounting is dangerous and may not be considered!

Don’t cover any ventilation openings as this may result in overheating.

The operator has to make sure that the safety-relating and machine-technical installations are approved by

an expert before using them for the first time. The installations should be inspected every year by a skilled

person to be sure that safety is still optimal.

ELECTRICAL INSTALLATION

Important: The electrical installation should be carried out by qualified personal only,

according to the regulations for electrical and mechanical safety in your country.

Electrical installation for 1 standalone unit:

Insert the mains cable. The unit starts working immediately in the last selected mode.

Refer to chapter HOW TO SETUP to learn how to switch between the different working modes.

If you like, you can control the unit using the optionally available:

COB-4BAR FOOTCONTROL: foot controller, perfect for music bands etc.

LEDCON-02 Mk2: (must be Mk2 version!) perfect for use by DJs!

See chapters HOW TO SETUP and OPERATING INSTRUCTIONS for more information.

ENGLISH USER MANUAL

JB SYSTEMS®5/16 COB-4BAR

Electrical installation for two or more units in master/slave:

Connect several units together using good quality balanced microphone cables. The unit that has no

cable connected to its DMX-input is the “master”, the others are the slave units.

Make sure that all units are connected to the mains.

Refer to chapter HOW TO SETUP for more information.

Done!

Note: of course you can always add a foot controller or LEDCON-02 Mk2 to the master for more control.

Electrical installation for two or more units in DMX-mode:

The DMX-protocol is a widely used high speed signal to control intelligent light equipment. You need to

“daisy chain” your DMX controller and all the connected units with a good quality

balanced cable.

To prevent strange behavior of the light effects, due to interferences, you must use

a 90Ω to 120Ω terminator at the end of the chain. Never use Y-splitter cables, this

simply won’t work!

Make sure that all units are connected to the mains.

Each light effect in the chain needs to have its proper start address so it knows which commands from

the controller it has to decode. In the section HOW TO SETUP you will learn how to set the DMX

addresses. If for example you use the 4 channel DMX mode, a possible address setup could be: unit1 =

001 ~ unit2 = 005 ~ unit3 = 009 ~ unit4 = 013 ~ etc.

HOW TO SETUP:

DMX512 Address Setting

Used to set the start address in a DMX setup.

Press the MODE button until DMX MODE is shown on the display.

Press the ENTER button to enter the configuration mode

Use the DOWN and UP buttons to change the DMX address.

Once the correct address is shown on the display, press the ENTER button to confirm.

The channel mode will now start to blink on the display (03, 05, 06, 08, 12, 17, 18 Channels or LC-XL)

Use the DOWN and UP buttons if you would like to change the channel mode

Press the ENTER button to confirm

DMX Channel Mode

The unit has 7 different DMX channel modes. With this function you can choose the DMX mode you

want to use. Refer to the DMX-charts to see the differences.

Press the MODE button until DMX MODE is shown on the display.

Press the ENTER button to enter the configuration mode

The DMX address will start blinking on the display

Use the DOWN and UP buttons if you want to change this DMX start address.

Press the ENTER button to confirm.

The channel mode will now start blinking on the display (03, 05, 06, 08, 12, 17 or 18)

Use the DOWN and UP buttons if you would like to change the channel mode

Press the ENTER button to confirm

ENGLISH USER MANUAL

JB SYSTEMS®6/16 COB-4BAR

SLAVE MODE + FOOT CONTROLLER

Used to set the unit in slave mode when you want to have synchronized effects with the master unit.

(when the first unit is running it’s automatic programs or is set in a fixed color)

Used when you want to control the bar with the optional foot controller

Press the MODE button until SLAVE is shown on the display.

Press the ENTER button to confirm.

IMPORTANT: If you want to use the automatic modes and make the settings directly on the bar, you

need to deactivate the IR remote control receiver in the bar. (IR ACTIVE = OFF)

SOUND MODE

Used to set the parameters for the automatic Sound Mode.

Press the MODE button until SOUND MODE is shown on the display.

Press the ENTER button to enter the configuration mode

The value of the sensitivity (SENS) will start blinking on the display

Use DOWN and UP buttons to change the sensitivity of the build-in microphone (00 = minimal sensitivity,

31 = maximal sensitivity).

Press the ENTER button to confirm.

The value of the frequency (FQN) will start blinking on the display

Use DOWN and UP buttons to change the number of times each automatic program should be repeated

before to go automatically to the next automatic program.

Press the ENTER button to confirm.

IMPORTANT: Don’t forget the bar is equipped with a master dimmer. If the output seems to be too

low or if there is no light output at all, please check the MASTER DIM setting !

STATIC COLOR MODE:

Used to set a static color for the projectors.

Press the MODE button until 01.STATIC or xx.EFFECT (number 02 to 14 followed by EFFECT) is shown

on the display.

Press the ENTER button to enter the configuration mode

The actual mode (static or effect mode) is blinking on the display

If necessary, use the DOWN and UP buttons to select 01.STATIC

Press the ENTER button to enter the configuration mode for the static colors

Use DOWN and UP buttons to select COLOR_CW (cold white), COLOR_WW (warm white) or COLOR

SET (to compose your own color).

If you have chosen COLOR_CW or COLOR_WW : just press the ENTER button to confirm your choice

If you have chosen COLOR SET: press the ENTER button to access the manual color settings

RED is blinking on the display: use the DOWN and UP buttons to set the intensity of the red color

(000 = minimum, 255 = maximum)

Press the ENTER button to confirm and to go to the next color

GREEN is blinking on the display: use the DOWN and UP buttons to set the intensity of the green

color (000 = minimum, 255 = maximum)

Press the ENTER button to confirm and to go to the next color

BLUE is blinking on the display: use the DOWN and UP buttons to set the intensity of the blue

color (000 = minimum, 255 = maximum)

Press the ENTER button to confirm

IMPORTANT: Don’t forget the bar is equipped with a master dimmer. If the output seems to be too

low or if there is no light output at all, please check the MASTER DIM setting !

SLOW COLOR FADE MODE:

Used to let the projectors slowly fade from one color into another.

Press the MODE button until 01.STATIC or xx.EFFECT (number 02 to 14 followed by EFFECT) is shown

on the display.

Press the ENTER button to enter the configuration mode

The actual mode (static or effect mode) is blinking on the display

Use the DOWN and UP buttons to select 02.EFFECT (fading from one color into another) or

04.EFFECT (each color fading on and off)

Press the ENTER button to confirm

ENGLISH USER MANUAL

JB SYSTEMS®7/16 COB-4BAR

Speed starts blinking on the display: Use the DOWN and UP buttons to set the desired running speed (00

= slow, 99 = maximum speed)

Press the ENTER button to confirm

Flash starts blinking on the display: Use the DOWN and UP buttons to set the desired speed for the

stroboscopic effect (00 = off, 99 = maximum speed)

Press the ENTER button to confirm

IMPORTANT: Don’t forget the bar is equipped with a master dimmer. If the output seems to be too

low or if there is no light output at all, please check the MASTER DIM setting !

AUTOMATIC CHASE MODE:

Used to set the automatic Chase Mode so colors will change automatically at a constant speed.

Press the MODE button until 01.STATIC or xx.EFFECT (number 02 to 14 followed by EFFECT) is shown

on the display.

Press the ENTER button to enter the configuration mode

The actual mode (static or effect mode) is blinking on the display

Use the DOWN and UP buttons to select one of the 11 chase modes (03, 05, 06, 07, 08, 09, 10, 11, 12, 13

or 14.EFFECT).

Press the ENTER button to confirm

Speed starts blinking on the display: Use the DOWN and UP buttons to set the desired running speed (00

= slow, 99 = maximum speed)

Press the ENTER button to confirm

Flash starts blinking on the display: Use the DOWN and UP buttons to set the desired speed for the

stroboscopic effect (00 = off, 99 = maximum speed)

Press the ENTER button to confirm.

Remark: if you have selected 13.EFFECT or 14.EFFECT, you can choose 2 colors for your chase program:

C1 will blink on the display

Use the DOWN and UP buttons to and UP buttons to select the first color of your chase program.

Press the ENTER button to confirm

C2 will now blink on the display

Use the DOWN and UP buttons to and UP buttons to select the second color of your chase program.

Press the ENTER button to confirm

IMPORTANT: Don’t forget the bar is equipped with a master dimmer. If the output seems to be too

low or if there is no light output at all, please check the MASTER DIM setting !

AUTO RUN:

Used to start the automatic Random Chase Mode. The bar will play each individual chase program at

random. The speed and strobe speed that you have set for each individual chase program will be

used during this show. (see previous description: AUTOMATIC CHASE MODE)

Press the MODE button until AUTO RUN is shown on the display.

Press the ENTER button to enter the configuration mode

FQN will start blinking on the display.

Use the DOWN and UP buttons to change the number of times each program should be repeated before

to go automatically to the next automatic program. (01 to 99 times)

Press the ENTER button to confirm

FLOW INVERT

Used to invert the flow direction of the automatic chases. This can be useful when you use several

bars together in master / slave mode

Press the MODE button until FLOW INVERT is shown on the display.

Press the ENTER button to enter the configuration mode

Use the DOWN and UP buttons to select ON (flow is inverted) or OFF (flow is not inverted)

Press the ENTER button to confirm

MASTER DIM

This is the general master dimmer for ALL the build-in effect of the 4BAR.

Press the MODE button until MASTER DIM is shown on the display.

Press the ENTER button to enter the configuration mode

Use the DOWN and UP buttons to change the general dimmer level of the 4BAR

Press the ENTER button to confirm

ENGLISH USER MANUAL

JB SYSTEMS®8/16 COB-4BAR

If you would have the impression the 4BAR is not working, please check if this MASTER DIMMER is

not set to zero or to a too low level !

IR ACTIVE

Activate this function If you want to control the 4BAR with the small wireless remote control.

Always deactivate this function when you don’t want to use the wireless remote control.

Press the MODE button until IR ACTIVE is shown on the display.

Press the ENTER button to enter the configuration mode

Use the DOWN and UP buttons to select ON (wireless controller can be used) or OFF (cannot be

controlled via the wireless remote controller)

Press the ENTER button to confirm

IMPORTANT: If you don’t want to use the wireless remote controller, you need to deactivate the IR

remote control receiver in the bar. (IR ACTIVE = OFF)

LIGHT EFFECT OUT (only when controlled via DMX)

With this option you can decide if the 2 extra power outputs for extra light effect (12) and (13) can be

turned ON/OFF via DMX or if the power needs always to be ON

Press the MODE button until LIGHT EFFECT OUT is shown on the display.

Press the ENTER button to enter the configuration mode

Use the DOWN and UP buttons to select DMX CONTROL ON (the power outputs can be switched on or

off via DMX) or DMX CONTROL OFF (the power outputs are continuously ON)

Press the ENTER button to confirm

DEFAULT modes

If you want to use the 4bar with the Ledcon-02 or the Ledcon-XL controller, you need to modify a lot

of settings in the bar. If you forget one, it will not work…

To make it easy for you, we have added these default modes. Just select the Ledcon-XL or the

Ledcon-02 mode and all the settings will be automatically correct. All you still have to do is to set the

desired DMX address.

If you want to return to the original factory mode, select the factory preset.

You can find the settings that are done automatically in the chart below:

Factory Default

Ledcon-02

Ledcon-XL

Channel Mode

18 CH

LC-XL

Sound sensitivity

Max (31)

Flow invert

OFF

Master Dim

100%

IR ACTIVE

OFF

LIGHT EFFECT OUT

(230V connectors)

(controllable via DMX)

OFF

(NOT controllable via DMX)

Power continuous ON

OFF

(NOT controllable via DMX)

Power continuous ON

Press the MODE button until DEFAULT is shown on the display.

Press the ENTER button to enter the configuration mode

Use the DOWN and UP buttons to select the desired default mode

Press the ENTER button to confirm

OPERATING INSTRUCTIONS

A. Standalone 1unit:

Just connect the projector to the mains.

Select one of the automatic, sound or static color modes

Refer to chapter HOW TO SETUP to learn how to make the settings.

B. Two or more units in master/slave setup:

Connect the units together. Refer to the chapter “electrical installation” to learn how to do this.

Otros manuales para COB-4BAR

Tabla de contenidos

Otros manuales de Equipo de DJ de JB Systems

JB Systems

JB Systems STRIKER Manual de usuario

JB Systems

JB Systems MCD 200 Manual de usuario

JB Systems

JB Systems PARTY SPOT Manual de instalación

JB Systems

JB Systems Lounge Laser DMX Manual de usuario

JB Systems

JB Systems MCD 150 Manual de usuario

JB Systems

JB Systems CHALLENGER BSW Manual de usuario

JB Systems

JB Systems Liverack-10 Manual de usuario

JB Systems

JB Systems USB MUSHROOM Manual de usuario

JB Systems

JB Systems DJ-kontrol 2 Manual de usuario

JB Systems

JB Systems PARTY BEAMS Manual de usuario

JB Systems

JB Systems USB DERBY Manual de usuario

JB Systems

JB Systems CLUBSPOT Manual de instalación

JB Systems

JB Systems Sunbar White Manual de usuario

JB Systems

JB Systems MIX6 USB Manual de usuario

JB Systems

JB Systems LIVE-6 Manual de usuario

JB Systems

JB Systems BEAT6 Mk2 Manual de usuario

JB Systems

JB Systems SPACE-4 Mk2 LASER Manual de usuario

JB Systems

JB Systems Led Globe Manual de usuario

JB Systems

JB Systems CLUBWASH Manual de usuario

JB Systems

JB Systems DYNAMO 250 Manual de usuario

JB Systems

JB Systems LED Rave Manual de usuario

JB Systems

JB Systems Bubble-01 Manual de usuario

JB Systems

JB Systems CD 100 Manual de usuario

JB Systems

JB Systems enh2.3 Mk2 Manual de usuario

Manuales populares de Equipo de DJ de otras marcas

ALPHA LITE

ALPHA LITE ALPHA 1500 Manual del propietario

Chauvet

Chauvet OVATION E-930VW Manual de usuario

Zumtobel

Zumtobel APHRODITE Home Manual de usuario

Snow Masters

Snow Masters Zig Oscillator Manual de usuario

EuroLite

EuroLite 50530554 Manual de usuario

Beamz

Beamz BUV243 Manual de usuario

thomann

thomann Stairville DJ Lase 40-G MK-III Manual de usuario

Eagletone

Eagletone 6 Eyes Flower Manual de usuario

EuroLite

EuroLite FLD-1508 Manual de usuario

Technical Pro

Technical Pro LG8xSEA Manual de usuario

Lightmaxx

Lightmaxx Vega Halo 90 Manual de usuario

Elation

Elation FUZE WASH Z350 Manual de usuario

Maverick

Maverick MK3 WASH Manual de usuario

Infinity

Infinity TF-260C7 Fresnel Manual de usuario

Chauvet

Chauvet EVE E-50Z Manual de usuario

Eliminator Lighting

Eliminator Lighting E 138 Manual de usuario

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario

KAM

KAM DMX Laser80 FScan Manual de usuario