J&R MANUFACTURING 250R-FS Manual de operación
J&R MANUFACTURING, INC.(972) 285-4855 (Texas)
820 W. Kearney, Suite B (800) 527-4831 (All 50 States & Canada)
P. O. Box 850522 (972) 289-0801 (Parts & Service)
Mesquite, TX 75185-0522 (972) 288-9488 (Fax)
SMOKE-MASTER
250R-FS
THE LITTLE RED
SMOKEHOUSE
250FS & 250 FSE
OPERATIONS AND
SERVICE MA
NUAL
CE VERSION
SN _______________
Original (English Language) Instructions
SMOKE-MASTER
Model 250R-FS
THE LITTLE RED
SMOKEHOUSE
Model 250FSE
OPERATIONS AND SERVICE
MANUAL
CE Version
MANUFACTURED BY:
J & R MANUFACTURING, INC.
820-B West Kearney
Mesquite, Texas
USA Rev. 08-18
WARNINGS!
Disposal of Ashes
Ashes should be placed in a metal container with a tight-fitting lid. J&R offers
ash carts suitable for this purpose. The closed container of ashes should be
placed on a noncombustible floor or on the ground, well away from all
combustible materials, pending final disposal. If the ashes are disposed of by
burial in soil or otherwise locally dispersed, they should be retained in the closed
container until all cinders have thoroughly cooled.
Creosote – Formation and Need for Removal –
When wood is burned slowly, it produces tar and other organic vapors, which
combine with expelled moisture to form creosote. The creosote vapors condense
in the relatively cool chimney flue of a slow-burning fire. As a result, creosote
residue accumulates on the flue lining. When ignited this creosote makes an
extremely hot fire. The chimney connector and chimney should be inspected at
least twice monthly to determine if a creosote buildup has occurred. If creosote
has accumulated it should be removed to reduce the risk of a chimney fire.
Dedicated flue
If this unit is to be directly vented (no exhaust hood) do not connect to a flue
serving another appliance.
DANGER-Risk of Fire or Explosion
Do not burn garbage, gasoline, drain oil or other flammable liquids
WARNING-Risk of Fire
Do not operate with flue draft exceeding 0.03 in. water column.
Do not operate with fuel loading or ash removal doors open.
Do not store fuel or other combustible material within marked
installation clearances.
Inspect and clean flues and chimney regularly
CAUTION-Hot Surfaces
Keep children away
Do not touch during operation
Maximum draft 0.03 in. water column
If the pit stops (lights go off, etc.) and the front door feels excessively
hot to the touch, DO NOT OPEN THE PIT, as there may be a grease
fire inside. The pit will automatically resume operation when it cools
down. Open the doors only after it cools down.
NEVER OPEN A PIT DOOR UNTIL THE PIT HAS BEEN SWITCHED
TO EVAC FOR AT LEAST 60 SECONDS.
EU
DECLARATION
OF
CONFORMITY
No.:
DC
rev
02122018
Manufacturer:
Company
name:
J&R
Manufacturing,
Inc.
Address:
820-B
West
Kearney
Mesquite
Texas
75149
United
States
Authorized
Representative
I
Person
authorized
to
compile
the
Technical
File
(IF
ANY,
OTHERWISE
DELETE
THIS
SECTION):
Company
name:
Alura
Group
B.V.
Address:
Zwolsestraat
156
2587WB
The
Hague
Netherlands
This
declaration
of
conformity
is
issued
under
the
sole
responsibility
of
the
manufacturer.
Object(s)
of
the
declaration:
250
Series Smoker
Models
250F5E;
250RFS
The
object
of
the
declaration described
above
is
in
conformity
with
the
relevant
Community
harmonization
legislation:
Directive
2014/35/EU
of
the
European
Parliament
and
of
the
Council
of
26
Februaty 2014
on
the
harmoni5ation
of
the
laws
of
the
Member
States
relating
to
the
making
available on
the market
of
electrical
equipment designed
for use
within
certain
voltage
limits
(in
short
“the Low
Voltage
Directive”
or
“the
Low Voltage
Equipment
Directive
‘2
Directive
2014/30/EU
of
26
Februaty
2014
on
the
harmonisation
of
the
laws
of
the
Member
States
relating
to
electromagnetic
compatibility
(recast)
(in
short
referred
to
as
“the
EMC
Directive
‘2
References
to
the
relevant
harmonised
standards
used or
references
to
the
specifications
in
relation to
which
conformity
is
declared:
EN
1672-2:
2005+A1:2009
EN
60204-1:2006,
EN
60204-1:2006/A1:2009,
EN
60204-1:2006/A
C:2010
EN-IEC
60335-2-36:2002,
EN-IEC
60335-2-36:2002/A11:2002
Additional
information:
Signed for
and
on
behalf
of
J&R
Manufacturing,
Inc.
Mesquite,
Txas.
USA
Michael
Higgins
..
(Signature)
February 12, 2018
MODELS 250R-FS, 250 FS, 250 FSE ..............................................
INSTALLATION INSTRUCTIONS ..................................................... 2
DESIGN .........................................................................................
MODEL 250 NOMENCLATURE AND IMAGES
CONTENTS
1
5
OPERATIONAL SEQUENCING ........................................................ 6
OPERATING PROCEDURES............................................................. 7
MAINTENANCE AND CLEANING..................................................... 11
TIMER INSTRUCTIONS ...................................................................13
TROUBLESHOOTING...................................................................... 14
................................. 17
TIMER INSTRUCTIONS .................................................................... 39
ELECTRICAL DRAWINGS............................................................... 31
THERMOSTAT INSTRUCTIONS ......................................................35
WARRANTY.................................................................................... 42
WOOD SOURCE ............................................................................ 43
MODELS 250 R-FS; 250 FSE
These machines are solid-fuel fired meat smokers. They are intended to cook and smoke
meat from the raw state to the fully cooked state. They are intended to be used in indoors-
commercial settings, such as restaurants, institutions, and catering kitchens.
The operation of these units is identical.
The difference is that the 250 R-FS is physically larger,
The electrical heating elements are always mounted in the convection fan
air stream at the top of the units. The heater elements are controlled by
either the primary or secondary thermostat but will only operate if the
Heater Element Switch on the control panel is energized.
Page 1 of 43
2. Move unit into position.
1. Your unit will be shipped fully assembled. It can be handled with a
4000 pound capacity forklift. Uncrate and inspect for concealed
shipping damage. Install the casters (packed inside the unit).
INSTALLATION INSTRUCTIONS
Floor: Unit to be installed on a non-combustible floor
3. Vent according to venting instructions on the following pages.
5. Electrical
The unit will require 220 Volt, 19 Amp, 50/60Hz single-phase service.
Directly wire the unit, making the field connections inside the junction
box provided. Supply circuit requires two conductors plus a
completely de-energize all components of the machine.
(PE) ground (L1, L2, PE). A two pole, 20-amp breaker is required. Turn the
circuit breaker off and tag it whenever servicing as this is the only way to
4. Clearances: (in cm.) From Any Combustibles:
Above Top From Front From Back From Sides From Chimney
Of Casing Connector
30.5 122 15 2.5 46
Page 2 of 43
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Fumador de J&R MANUFACTURING
