Jackson Dishmachine Stand M24STD-6 Manual de usuario

Jackson MSC, INC.

P.O. BOX 1060

HWY. 25E

BARBOURVILLE, KY. 40906

FAX (606) 523-9196

PHONE (606) 523-9795

www.jacksonmsc.com

Installation Instructions

FOR JACKSON MODEL:

M24STD-6

Dishmachine Stand

August 7, 2006

P/N 07610-003-26-13 Rev. A

M24STD-6 INSTALLATION INSTRUCTIONS

Installation Instructions 07610-003-26-13

Issued: 08-10-2006 Revised: N/A

Tools Required:

• Standard Allen wrench set

• Tube of food-grade silicon

• Silicon gun

• Rag

Time Requirements:

It is expected that it will take 30 minutes to

install the M24STD-6 dishmachine stand.

Notes:

• Ensure that the dishmachine stand is

level prior to placing the dishmachine

on the stand.

• Never attempt to lift a dishwasher on

your own. Always use other personnel

to help or the appropriate lifting devices

to prevent accident and injury.

Steps:

• Inspect the assembly to ensure that

there has been no freight damage. If

there is any damage, contact the

freight carrier immediately.

• Your package should contain the fol-

lowing:

• Stand platform weldment

• (4) legs

• Instructions

• If any of these items are missing, im-

mediately contact Jackson Technical

Service at 1-888-800-5672.

• Remove the items from the box.

• Ensure that the set screws are located

within the leg sockets. If they are miss-

ing, immediately contact Jackson

Technical Service (See Figure 1).

• Verify that the foot of each leg can be

turned; this is how the stand will be ad-

justed in order to level it. Please note

that when assembled, there should be

a minimum of 6” (152.4mm) of space

between the bottom of the stand and

the finished floor.

• Place the legs fully into the leg sockets

of the platform and tighten down the

set screws to secure them in place.

(See Figure 2).

• Once all of the legs are tightly in place,

flip the dishmachine stand over and set

it down on all four legs. Ensure that the

legs are stable.

• If stable, take a small amount of silicon

and apply it to the set screw to cover

any exposed threads and to fill in the

hole for the Allen wrench. (See Figure

3). Note: do not use excessive

amounts of silicon; only enough to

complete the task.

Figure 1—Leg socket showing set screw

Figure 2—Tightening the legs

M24STD-6 INSTALLATION INSTRUCTIONS

Installation Instructions 07610-003-26-13

Issued: 08-10-2006 Revised: N/A

•To mount the undercounter dishmachine,

remove the feet from the frame bottom by un-

screwing them.

•Set the unit on top of the stand (minus the

feet) on the platform, lining up the holes in the

frame to the corresponding holes in the plat-

form.

•Secure the unit to the platform by rein-

serting and tightening the feet.

•Verify that the unit is level prior to making

any utility connections. If the unit is not level,

it may operate inefficiently.

After Maintenance Actions:

• Wipe down the stand to remove any

excess silicon.

• Once the dishmachine is fully hooked

up and operational (per the manufac-

turer’s instructions), operate the ma-

chine and observe it to ensure that

there is no excessive vibration or any

other source of concern.

Preventative Maintenance:

• Keep the area under the platform free

of dirt, soil and debris.

• Clean the stand regularly with a wet

towel to prevent the build-up of residue

and soil.

Figure 3—Applying silicon

Tabla de contenidos

Otros manuales de Lavavajillas de Jackson

Jackson

Jackson Traditional Series TSC-66 Manual de usuario

Jackson

Jackson Conserver XL-E Series Guía de configuración

Jackson

Jackson CONSERVER 24LT Manual de usuario

Jackson

Jackson ECOLAB ES-2000 Manual de usuario

Jackson

Jackson Delta HT-E-SEER-S Guía de configuración

Jackson

Jackson DELTA 5-E Manual de usuario

Jackson

Jackson JPX-300H Manual de usuario

Jackson

Jackson DishStar HT Guía del usuario

Jackson

Jackson DELTA 115 Guía del usuario

Jackson

Jackson DYNASTAR Series Guía del usuario

Jackson

Jackson 100 B/PRB Manual de usuario

Jackson

Jackson Conserver AXL Manual de usuario

Jackson

Jackson TEMPSTAR HH-E Guía de configuración

Jackson

Jackson 200 3 10 06401-003-12-94 Especificaciones técnicas

Jackson

Jackson Hot Water Sanitizing Undercounter Dishmachines... Manual de usuario

Jackson

Jackson AJX-44 Series Manual de usuario

Jackson

Jackson Door Gasket Kit JPX-300 Manual de usuario

Jackson

Jackson Avenger HT Manual de usuario

Jackson

Jackson CJ-20 Manual de usuario

Jackson

Jackson Enodis 300X Manual de usuario

Jackson

Jackson TEMPSTAR Manual de usuario

Jackson

Jackson AJ-64CGP Manual de usuario

Jackson

Jackson 150B/PRB Manual de usuario

Jackson

Jackson DELTA Series Guía de configuración

Manuales populares de Lavavajillas de otras marcas

Electrolux

Electrolux ESI5211LOX Manual de usuario

KitchenAid

KitchenAid KUDB230B Manual de usuario

Brandt

Brandt BDJ424DB Manual de usuario

Asko

Asko DSD767UXXL.AU Manual de usuario

Beko

Beko DFN26210W Manual de usuario

NEFF

NEFF S153ITX00E Hoja de especificaciones

Midea

Midea SV 4.45 wi Manual de usuario

LG LDF7932 Manual de usuario

Gorenje

Gorenje GV63214 Manual de usuario

Hotpoint

Hotpoint HDA1100ZWH Manual de servicio

Blomberg

Blomberg LDFN2240W Manual de usuario

AEG

AEG FFB83836PM Manual de usuario

Cylinda

Cylinda DM3220RFD Manual de usuario

Atag

Atag DW8214MB Manual de usuario

GE GLD8000 Series Manual de usuario

Siemens

Siemens SN23HI02KE Hoja de especificaciones

Omega

Omega ODW717X Manual de usuario

BORETTI

BORETTI BVW-683 Manual de usuario