IMPORTANT SAFETY INFORMATION
Failure to heed these markings may result in personal injury and/or property damage:
1. Study, understand, and follow all instructions
before operating this device.
2. Do not exceed rated capacity.
3. Use only on hard, level surface.
4. Before moving a load, assure that the load is
centered and secured with a load restraint device.
5. No alterations shall be made to this product.
6. Wear ANSI-approved safety goggles and
heavy-duty work gloves during use.
7. Keep clear of load’s path while placing on and
removing from dollies, and while moving.
8. Use as intended only. Do not use for
aircraft purposes. Use only in pairs.
9. Inspect before every use; do not use
if parts are loose or damaged.
10. Be aware of dynamic loading! Sudden
load movement may briefly create excess
load causing product failure.
11. Assemble only according to these instructions.
Improper assembly can create hazards.
12. Keep your work area clean and well lit.
Cluttered work areas invite accidents.
13. Keep bystanders, children, and visitors away
while operating Wheel Dolly. Distractions
can cause you to lose control.
14. Stay alert. Watch what you are doing, and
use common sense when operating Wheel
Dollies. Do not use while tired or under the
influence of drugs, alcohol, or medication. A
moment of inattention while operating Wheel
Dollies may result in serious personal injury.
15. Before use, read manufacturer’s instruction
manual for the vehicle you will lift.
16. Keep clear of load while lifting and lowering.
17. Do not work under vehicle while on Dollies.
18. Lower load slowly.
19. Weight capacity and other product capabilities apply
to properly and completely assembled product only.
20. Store idle Wheel Dollies out of reach of children
and other untrained persons. Jacks are
dangerous in the hands of untrained users.
21. Wheel Dolly service must be performed
only by qualified repair personnel. Service
or maintenance performed by unqualified
personnel could result in a risk of injury.
22. When servicing a Wheel Dolly, use only identical
replacement parts - refer to attached, product-specific
parts list and diagram. Follow instructions in the
“Inspection, Maintenance, And Cleaning” section of
this manual. Use of unauthorized parts or failure to
follow maintenance instructions may create a risk
of injury and may void any applicable warranty.
23. Industrial applications must follow
OSHA requirements.
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
