IWILL BD100 Plus Manual de usuario

EC Declaration of Conformity

Iwill Corp.

No. 10, Wu Chuan 3rd Rd.,

Hsin Chuang City, Taipei,

Taiwan, R.O.C.

Declare under sole responsibility that the

BD100 Plus motherboard

Meets the intent of Directive 89/336/ECC for Electromagnetic Compatibility. Compliance was

demonstrated to the following specifications as listed in the official Journal of the European

Communities:

EN 50081-1 Emissions:

EN 55022 Radiated, Class B

EN 55022 Conducted, Class B

EN 60555-2 Power Harmonics

EN 50082-1 Immunity:

IEC 801-2 Electrostatic Discharge

IEC 801-3 RF Radiate

IEC 801-4 Fast Transient

About This Manual

This manual will introduce to the user how this product is consisted. All useful information will be

described in later chapters. Keep this manual for your future upgrade or system re-configuration.

Chapter 0 Overview

An overview of some special and basic features of the BD100 Plus motherboard

Chapter 1 Features

The detailed features and specifications of the BD100 Plus motherboard

Chapter 2 Quick Installation

The quick reference for experienced users

Chapter 3 Hardware Installation

The detailed information on jumper setting, connection, and hardware installation

Chapter 4 System BIOS Setup

The detail information of the system BIOS setup options

Chapter 5 Software and Tools

The detail information for install software and tools

This manual contains information protected by copyright law. All rights are reserved. No any part of

this document may be used or reproduced in any forms or by any means, or stored in a database or

retrieval system without prior written permission from Iwill Corp.

This manual is subject to change without notice.

Trademark

Intel / Pentium are trademarks of Intel Corporation.

IWILL and IWILL logo are trademarks of IWILL Corp.

Sound Blaster is a registered trademark of Creative Technology Ltd.

Sound Blaster-LINK and SB-LINK are trademarks of Creative Technology Ltd.

All other product names are trademarks and registered trademarks of their respective owners.

Warning

Most of the features of this product have passed strict verification and are subject to change at any

time without notice. If any malfunction occurs due to the future technical changes made by the

respective component manufacturers, Iwill assumes no responsibility or liability for it.

Contents

CHAPTER 0.................................................................................................5

OVERVIEW.................................................................................................5

CHAPTER 1.................................................................................................7

FEATURES...................................................................................................7

1.1 FEATURES ..............................................................................................7

1.2 ENVIRONMENT REQUIREMENTS...............................................................9

1.3 MOTHERBOARD COMPONENTS PLACEMENT...........................................10

1.4 BACK PANEL CONNECTOR ..................................................................102

1.5 FORM FACTOR......................................................................................13

CHAPTER 2...............................................................................................15

QUICK INSTALLATION..........................................................................15

CHAPTER 3...............................................................................................19

HARDWARE INSTALLATION ................................................................19

3.1 PREPARATION AND INSPECTION .............................................................19

3.2 UNPACK THE BD100 PLUS....................................................................19

3.3 INSTALLATION PROCEDURE ...................................................................20

CHAPTER 4...............................................................................................29

SYSTEM BIOS SETUP..............................................................................29

4.1 INTRODUCTION.....................................................................................29

4.2 MAIN MENU.........................................................................................30

4.3 STANDARD CMOS SETUP ...............................................................31

4.4 BIOS FEATURES SETUP...................................................................34

4.5 CHIPSET FEATURES SETUP ............................................................38

4.6 POWER MANAGEMENT SETUP......................................................41

4.7 PNP/ PCI CONFIGURATION..............................................................45

4.8 INTEGRATED PERIPHERALS ..........................................................46

4.9 LOAD SETUP DEFAULTS.................................................................50

4.10 IWILL SMART SETTING.................................................................50

4.11 SUPERVISOR / USER PASSWORD SETTING.................................51

4.12 IDE HDD AUTODETECTION..........................................................52

4.13 SAVE & EXIT SETUP.......................................................................52

4.14 EXIT WITHOUT SAVING................................................................52

CHAPTER 5...............................................................................................53

SOFTWARE AND TOOLS........................................................................53

5.1 SOFTWARE INSTALLATION.....................................................................53

5.2 HOW TO MAKE DRIVER DISKETTE WITHOUT O.S. INSTALLED...................54

5.3 CPU FREQUENCY SELECTION BY BIOS..................................................54

5.4 VIEW DETAILED MANUAL.....................................................................55

5.5 INSTALLING OPERATING SYSTEMS.........................................................55

5.6 INSTALLING THE SUSPEND TO DISK UTILITY ON YOUR BD100 PLUS ......57

5.7 HOW TO USE THE THERMAL SENSOR......................................................62

5.8 IWILL SCSI SERIES ...............................................................................63

Chapter 0

Overview

Thank you for purchasing Iwill BD100 Plus motherboard. This operation manual will instruct you

how to configure and install the system properly. It contains an overview about the engineering

design and features of this product. Also, this manual provides useful information for later upgrades

or configuration changes. Keep this for your future reference.

BD100 PLUS FEATURES

The BD100 Plus is the newest, most exciting motherboard in the market today. A step ahead of the

competition, the BD100 Plus provides more power, convenience, and reliability for users. The

BD100 Plus has more speed, and is great for better, fast computer graphics. The BD100 Plus has our

special Iwill Smart Setting—an easy way to set your CPU frequency—and also more versatile

power-on functions, all for your convenience. Furthermore, the BD100 Plus has several power

saving modes to reduce energy waste. All of these features are compacted in a dynamic motherboard

that has the stability you require in a powerful motherboard. Special features of the BD100 Plus

include:

lAGP Booster—allows for fast graphics for games, and in some cases brings more

stability to your AGP port

lIwill Smart Setting—allows easy setting of your CPU frequency, no jumpers required!

lVersatile Power-On—you can power-on the system using a hot key, password, LAN,

or modem

lPower Management Setup—allows you to set Doze, Standby, and Suspend modes

lPower Failure Recovery—after a power failure, the system will automatically turn on

again once the power returns

lHealth Monitoring System—helps manage your system so that your system runs safely

The BD100 Plus also includes some basic features, such as: 1 x Slot 1 for Pentium® III/II/Celeron,

Intel 443BX chipset, 4 x DIMM slots, 5 x PCI slots, 1 x FDC floppy disk connector, 2 x IDE

connectors, 2 x USB ports, 1 x PS/2 mouse, 1 x PS/2 keyboard ports, one parallel port, two serial

ports, ATX power connector, one Sound Blast Link connector, and much, much more!

The BD100 Plus has speed, convenience, and reliability, all wrapped up in one outstanding

motherboard. The BD100 Plus is ahead of the pack. There is no other motherboard quite like it.

Iwill: Lead the way into the 21st century!

YEAR 2000 issue

The IBM compatible PC utilizes a Motorola MC146818 compatible Real-Time Clock (RTC) chip to

maintain the date and time. Unfortunately, the “century”is not manipulated by the RTC. It uses 8-

bits of information to report the year and can only hold the last two digits of a year in packed BCD

format. For example, 1997 is reported solely as 97. Since the RTC also contains non-volatile

memory, IBM specified a location in the memory to hold “century”information. By combining the

century data with the year data, software can obtain a full 4-digit year. When the Year 2000 occurs,

the RTC reports the year as ’00’and the “century”in RTC memory will contain ’19.’Combining the

full 4-digit year yields 1900, not 2000. Any applications which compare dates, or uses relative dates

to perform functions will see incorrect dates.

All motherboards contain BIOS, which is one of the key ingredients to check for systems designed to

handle the year 2000. All motherboards currently shipped from Iwill contain BIOS capable of

handling the year 2000 date correctly. The BIOS contains a feature that checks the least two

significant digits of the year stored in the RTC during each BIOS request (INT 1Ah) to read the date

and, if less than `80', updates the century byte to `20'. This feature enables operating systems and

applications using the BIOS date/time services to reliably manipulate the year as a four-digit value.

Be aware that the BIOS capability alone does not ensure that the system will handle the transition

correctly. Other system components such as the operating system and application software also need

to be able to handle the year 2000 date, and recognize the date format from other sources.

Peripherals and Devices

If you want to improve your system’s I/O performance, choose the latest Iwill SCSI controllers. The

following are some Iwill SCSI controllers you may purchase and use with your BD100 Plus

motherboard:

lSIDE 2930C: a fast SCSI for MO, CD-R, CD-R/W, CD-ROM. This

value/performance SCSI card connects up to 7 devices.

lSIDE 2930U+: a 20MB/Sec. transfer rate. A full function card, supports booting from

hard disk or CD-ROM, connects 7 devices

lSIDE 2935UW: 40 MB/sec transfer rate, 15 devices. The most stable product for an

efficient system

lSIDE 2935LVD: an 80MB/sec transfer rate, and a 12-meter cable length connecting 15

devices. Perfect solution for enthusiasts.

Chapter 1

Features

1.1 Features

1.1.1 Processor

Supports single Pentium®

III/II/Celeron processors

Supports 100 MHz and 66 MHz bus speeds

Supports all published Pentium®

III/II/Celeron processor voltages

SEC (Single Edge Contact) cartridge Slot 1 connector

Jumper inside selects the processor speed from 233 MHz to 500 MHz or higher

1.1.2 Core Logic

Intel 82443BX PCI/ AGP controller

Integrated DRAM controller

Integrated PCI bus mastering controller

Integrated Accelerated Graphics Port (AGP) bus controller

Intel 82371EB PCI/ISA/IDE Xcelerator (PIIX4E)

Multifunction PCI-to-ISA bridge (PCI Rev 2.1 compliant)

Integrated IDE controller with Ultra DMA/33 support

USB host interface with support for two USB ports

Enhanced DMA controller and standard Interrupt controller and Timer function

System Management Bus (SMB) with support for DIMM Serial PD

1.1.3 Main Memory

4 x 168-pin DIMM (Dual Inline Memory Module) sockets

Supports up to 1 GB of 3.3 V Unbuffered SDRAM or Registered DIMM

Supports up to 1 GB of 3.3 V Extended Data Out (EDO) memory.

64-bit data interface with ECC support (SDRAM only)

1.1.4 Multi I/O

Winbond W83977 super I/O controller

Note: Several different chips of the W83977 series may be used to support special features.

Supports two floppy disk drives (include 3 Mode drive) and / or QIC-80 tape drive

Supports one multi-mode parallel port

Supports two high speed 16550 FIFO serial ports

Integrated keyboard controller

Integrated PS/2 mouse controller

Supports PS/2 Power-On function

Supports Power Failure Recovery

1.1.5 Expansion slots

1 x ISA slot

4 x PCI slots

1 x shared ISA/PCI slot

1 x AGP slot

1.1.6 Form Factor

Compliance with ATX Version 2.01 specification

Supports ATX power supply connector

Supports the remote on/off switch

Physical dimensions: length: 188 mm / width: 305 mm

1.1.7 Manageability

Winbond W83781 System Hardware Monitor built-in.

Note: Several different chips of the W83781 series may be used to support special features.

Wake on LAN header for use with add-in network interface cards (NICs)

Power failure recovery

Wake on modem

1.1.8 Other features

Award BIOS

Using 2Mbit Flash ROM to provide on-board-upgrade ability without changing components

Plug and Play compatible

Supports Advanced Power Management (APM)

Supports ACPI (Advanced Configuration Power Interface)

Supports Creative SB-LINK to deliver Sound Blaster 16 compatibility

1.2 Environment Requirements

Temperature 0-55 degrees C (operating or storage)

5% to 95% non-condensing relative humidity

At least a 250 W power supply

The power supply must comply with the following recommendations found in the specifications:

The potential relation between 3.3 VDC and +5 VDC power rails

The current capability of the +5VSB line

All timing parameters

1.3 Motherboard Components Placement

The following figure shows the location of the components on the BD100 Plus motherboard.

FAN1

AGP

FAN3

IDE0

IDE1

LPT

SLOT1

USB

J21,J22

JP5

PWR ON

PWR

DIMM0~3

FDC

J43

VCC

IRRX

GND

IRTX

IRMODE

GND

+12V

SENSE

1--2:Normal

2--3:Clear CMOS

JP1

SB-LINK

GNT#

GND

REQ#

GND

SIRQ

PCIx

LID-ON

GND

5VSB

WOL

FAN2

Tmp2

RST ALED

SPKR

Cathode-

Anode+

Reset

GND

VCC

Cathode-

Anode+

Buzz

GND

Keylock

GND

PLED

ACPI LED

Anode+ Cathode-

JP10

JP9

J52

JP11

JP42

Tabla de contenidos

Otros manuales de Placa madre de IWILL

IWILL

IWILL VX133u Manual de usuario

IWILL

IWILL DK8X Manual de usuario

IWILL

IWILL VX133 Manual de usuario

IWILL

IWILL DPIILS2 Manual de usuario

IWILL

IWILL dca200 Manual de usuario

IWILL

IWILL P55XU Manual de usuario

IWILL

IWILL DVD266u-RN Manual de usuario

IWILL

IWILL PIINS Manual de usuario

IWILL

IWILL piils Manual de usuario

IWILL

IWILL MPX2 Manual de usuario

IWILL

IWILL P4SE Series Manual de usuario

IWILL

IWILL P55XB2 Manual de usuario

IWILL

IWILL P55TU Manual de usuario

IWILL

IWILL WO2 Instrucciones de funcionamiento originales

IWILL

IWILL DH800 Manual de usuario

IWILL

IWILL VD133 Pro Series Manual de usuario

IWILL

IWILL P55TV Manual de usuario

IWILL

IWILL Motherboard DJ800 Manual de usuario

IWILL

IWILL DN800-SLI Manual de usuario

IWILL

IWILL XA100 Ultra ATA-2 Manual de usuario

IWILL

IWILL DK8N Manual de usuario

IWILL

IWILL P4SP Manual de usuario

IWILL

IWILL KK266 Manual de usuario

IWILL

IWILL DP533 Series Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario