IWILL VD133 Manual de usuario

EC Declaration of Conformity

IWILL Corporation

No. 10, Wu Chuan 3rd Rd.,

Hsin Chuang City, Taipei,

Taiwan, R.O.C.

Declare under sole responsibility that the

VD133 motherboard

Meets the intent of Directive 89/336/ECC for Electromagnetic Compatibility. Compliance was

demonstrated to the following specifications as listed in the official Journal of the European

Communities:

EN 50081-1 Emissions:

EN 55022 Radiated, Class B

EN 55022 Conducted, Class B

EN 60555-2 Power Harmonics

EN 50082-1 Immunity:

IEC 801-2 Electrostatic Discharge

IEC 801-3 RF Radiate

IEC 801-4 Fast Transient

About This Manual

This manual will introduce to the user how this product is installed. All useful information will be

described in later chapters. Keep this manual for future upgrades or system configuration changes.

Chapter 0 Overview

An overview of some special and basic features of the VD133 motherboard

Chapter 1 Features

The detailed features and specifications of the VD133 motherboard

Chapter 2 Quick Installation

The quick reference for experienced users

Chapter 3 Hardware Installation

The detailed information on jumper setting, connection, and hardware installation

Chapter 4 System BIOS Setup

The detailed information of the system BIOS setup options

Chapter 5 How to use Power Installer

The detailed information for installing software and tools

This manual contains information protected by copyright law. All rights are reserved. No part of this

document may be used or reproduced in any form or by any means, or stored in a database or retrieval

system without prior written permission from IWILL Corporation.

This manual is subject to change without notice.

Trademark

Intel / Pentium are trademarks of Intel Corporation.

IWILL and IWILL logo are trademarks of IWILL Corp.

Sound Blaster is a registered trademark of Creative Technology Ltd.

Sound Blaster-LINK and SB-LINK are trademarks of Creative Technology Ltd.

All other product names are trademarks and registered trademarks of their respective owners.

Warning

Most of the features of this product have passed strict verification tests, and are subject to change at

any time without prior notice. If any malfunction occurs due to the future technical changes made by

the respective component manufacturers, IWILL assumes no responsibility or liability for it.

Contents

CHAPTER 0.................................................................................................5

OVERVIEW.................................................................................................5

CHAPTER 1.................................................................................................7

FEATURES...................................................................................................7

1.1 FEATURES ..............................................................................................7

1.2 ENVIRONMENT REQUIREMENTS...............................................................9

1.3 MOTHERBOARD COMPONENTS PLACEMENT...........................................10

1.4 BACK PANE CONNECTORS ....................................................................12

1.5 FORM FACTOR......................................................................................13

CHAPTER 2...............................................................................................15

QUICK INSTALLATION..........................................................................15

CHAPTER 3...............................................................................................19

HARDWARE INSTALLATION ................................................................19

3.1 PREPARATION AND INSPECTION .............................................................19

3.2 UNPACK THE VD133.............................................................................19

3.3 INSTALLATION PROCEDURE ...................................................................20

CHAPTER 4...............................................................................................30

SYSTEM BIOS SETUP..............................................................................30

4.1 INTRODUCTION.....................................................................................30

4.2 MAIN MENU.........................................................................................31

4.3 STANDARD CMOS SETUP ...............................................................32

4.4 BIOS FEATURES SETUP...................................................................35

4.5 CHIPSET FEATURES SETUP ............................................................39

4.6 POWER MANAGEMENT SETUP......................................................41

4.7 PNP/ PCI CONFIGURATION .............................................................45

4.8 INTEGRATED PERIPHERALS ..........................................................47

4.9 LOAD SETUP DEFAULTS.................................................................52

4.10 IWILL SMART SETTING.................................................................52

4.11 SUPERVISOR PASSWORD SETTING.............................................54

4.13 IDE HDD AUTODETECTION..........................................................54

4.14 SAVE & EXIT SETUP.......................................................................54

4.15 EXIT WITHOUT SAVING................................................................54

CHAPTER 5...............................................................................................55

HOW TO USE POWER INSTALLER......................................................55

5.1 SOFTWARE INSTALLATION.....................................................................55

5.2 HOW TO USE THE POWER INSTALLER CD ...............................................55

5.3 INSTALLING OPERATING SYSTEMS.........................................................61

5.4 HOW TO USE THE THERMAL SENSOR......................................................63

5.5 IWILL SCSI SERIES .............................................................................63

Chapter 0

Overview

Thank you for purchasing the IWILL VD133 motherboard. This operation manual will instruct you

how to configure and install the system properly. It contains an overview about the engineering

design and features of this product. Also, this manual provides useful information for later upgrades

or configuration changes. Keep this for your future reference.

VD133 FEATURES

The VD133 is the newest, most exciting motherboard in the market today. A step ahead of the

competition, the VD133 provides more power, convenience, and reliability for users. The VD133

has more speed, and is great for better, fast computer graphics. The VD133 has our special IWILL

SmartSetting—an easy way to set your CPU frequency—and also more versatile power-on functions,

all for your convenience. Furthermore, the VD133 has several power-saving modes to reduce energy

waste. All of these features are compacted in a dynamic motherboard that has the stability you

require in a powerful motherboard. Special features of the VD133 include:

lIWILL Smart Setting—allows easy setting of your CPU frequency, no jumpers

required!

lVersatile Power-On—you can power-on the system using a hot key, password, LAN,

or modem

lPower Management Setup—allows you to set Doze, Standby, and Suspend modes

lPower Failure Recovery—after a power failure, the system will automatically turn on

again once the power returns

The VD133 also includes some basic features, such as: 1 x Slot 1 for Pentium® III/II/Celeron

TM, VIA

Apollo Pro 133 chipset, 3 x DIMM slots, 5 x PCI slots, 2 x ISA slots, 1 x FDC floppy disk connector,

2 x IDE connectors, 2 x USB ports, 1 x PS/2 mouse, 1 x PS/2 keyboard ports, one parallel port, two

serial ports, ATX power connector, one Sound Blaster Link connector, and much, much more!

The VD133 has speed, convenience, and reliability, all wrapped up in one outstanding motherboard.

The VD133 is ahead of the pack. There is no other motherboard quite like it.

IWILL: Lead the way into the 21st century!

YEAR 2000 issue

The IBM compatible PC utilizes a Motorola MC146818 compatible Real-Time Clock (RTC) chip to

maintain the date and time. Unfortunately, the “century”is not manipulated by the RTC. It uses 8-

bits of information to report the year, and can only hold the last two digits of a year in packed BCD

format. For example, 1997 is reported solely as 97. Since the RTC also contains non-volatile

memory, IBM has specified a location in the memory to hold “century”information. By combining

the century data with the year data, software can obtain a full 4-digit year. When the Year 2000

arrives, the RTC reports the year as ’00’and the “century”in RTC memory will contain ’19.’

Combining the full 4-digit year yields 1900, not 2000. Any application which compare dates, or uses

relative dates to perform functions will see incorrect dates.

All motherboards contain BIOS, which is one of the key ingredients to check for systems designed to

handle the year 2000. All motherboards currently shipped from IWILL contain BIOS capable

of handling the year 2000 date correctly. The BIOS contains a feature that checks the least two

significant digits of the year stored in the RTC during each BIOS request (INT 1Ah) to read the date

and, if less than `80', updates the century byte to `20'. This feature enables operating systems and

applications using the BIOS date/time services to reliably manipulate the year as a four-digit value.

Be aware that the BIOS capability alone does not ensure that the system will handle the transition

correctly. Other system components such as the operating system and application software also need

to be able to handle the year 2000 date, and recognize the date format from other sources.

Peripherals and Devices

If you want to improve your system’s I/O performance, choose the latest IWILL SCSI controllers.

The following are some IWILL SCSI controllers you may purchase and use with your VD133

motherboard:

lSIDE 2930C: a fast SCSI for MO, CD-R, CD-R/W, CD-ROM. This

value/performance SCSI card connects up to 7 devices.

lSIDE 2930U+: a 20MB/Sec. transfer rate. A full function card, supports booting from

hard disk or CD-ROM, connects 7 devices

lSIDE 2935UW: 40 MB/sec transfer rate, 15 devices. The most stable product for an

efficient system

lSIDE 2935LVD: an 80MB/sec transfer rate, and a 12-meter cable length connecting 15

devices. Perfect solution for enthusiasts.

Chapter 1

Features

1.1 Features

1.1.1 Processor

Supports single Pentium®

III/II/CeleronTM processors

Supports 133 MHz, 100 MHz and 66 MHz bus speeds

Supports all published Pentium®

III/II/ CeleronTM processor voltages

Jumper inside selects the processor speed from 233 MHz to 500 MHz or higher

1.1.2 Core Logic

VIA-VT82C693A APOLLO PRO 133

Integrated DRAM controller

Integrated PCI bus mastering controller

Integrated Accelerated Graphics Port (AGP) bus controller

VIA-VT82C596B PCI / ISA / IDE Xcelerator

Multifunction PCI-to-ISA bridge (PCI Rev 2.1 compliant)

Integrated IDE controller with Ultra DMA/66 support

USB host interface with support for two USB ports

Enhanced DMA controller and standard Interrupt controller and Timer function

System Management Bus (SMB) with support for DIMM Serial PD

1.1.3 Main Memory

3 x 168-pin DIMM (Dual Inline Memory Module) sockets

The VD133 motherboard supports the following memory features:

JEDEC MO-161 compliant 168-pin DIMMs with gold-plated contacts

Supports up to 1.25 GB of 3.3 V Unbuffered SDRAM, Registered DIMM, or

60-ns Extended Data Out (EDO) memory

Single-sided or double-sided DIMMs (3.3 V memory module only)

64-bit data interface with ECC support (SDRAM only)

ECC logic detects multiple-bit errors and corrects single-bit errors (SDRAM)

16 / 64 Mbit DRAM technology

Symmetrical and asymmetrical DRAM addressing

1.1.4 Multi I/O

Winbond W83977 super I/O controller

Supports two floppy disk drives (include 3 Mode drive) and / or QIC-80 tape drive

Supports one multi-mode parallel port

Supports two high speed 16550 FIFO serial ports

Integrated keyboard controller

Integrated PS/2 mouse controller

Supports PS/2 Power-On function

Supports Power Failure Recovery

1.1.5 Expansion slots

1 x ISA Slot / IBM AT compliant.

4 x PCI slots / PCI Rev2.1 compliant.

1 x shared ISA/PCI slot.

1 x AGP slot / AGP Rev2.0 compliant.

1.1.6 Form Factor

Compliance with ATX Version 2.01 specification

Supports ATX power supply connector

Supports the remote on/off switch

Physical dimensions: length: 188 mm / width: 305 mm

1.1.7 Manageability

Winbond W83781 System Hardware Monitor built-in.

Wake on LAN header for use with add-in network interface cards (NICs)

Flash Control

Hardware Monitoring

Wake on modem

1.1.8 Other features

Award BIOS

Using 2Mbit Flash ROM to provide on-board-upgrade ability without changing components

Plug and Play compatible

Supports Advanced Power Management (APM)

Supports ACPI (Advanced Configuration Power Interface)

Supports Creative SB-LINK to deliver Sound Blaster 16 compatibility

Supports PC133

Supports ATA66 IDE I/O

1.2 Environment Requirements

Temperature 0-55 degrees C (operating or storage)

5% to 95% non-condensing relative humidity

At least a 250 W power supply

The power supply must comply with the following recommendations found in the specifications:

The potential relation between 3.3 VDC and +5 VDC power rails

The current capability of the +5VSB line

All timing parameters

1.3 Motherboard Components Placement

The following figure shows the location of the components on the VD133 motherboard.

FAN2 S2 LPT USB

WOL S1 KB

(bottom)

JP5 IR JP9 TEMP2 MS(top)

KB_ON

PWR

SLOT1

TEMP1

AGP

FAN1

DIMM0

DIMM1

DIMM2

ISAx

PCIx

JP42

FAN3

J43

TEMP3 JP1 JP11 IDE0 FDC

SB-LINK IDE1

PWR-ON JP12 JP10

Otros manuales para VD133

Tabla de contenidos

Otros manuales de Placa madre de IWILL

IWILL

IWILL DPX2-S320 Manual de usuario

IWILL

IWILL DN800-SLI Manual de usuario

IWILL

IWILL KK266 Manual de usuario

IWILL

IWILL P4SE2 Manual de usuario

IWILL

IWILL Motherboard DJ800 Manual de usuario

IWILL

IWILL WO2 Instrucciones de funcionamiento originales

IWILL

IWILL P4G Series Manual de usuario

IWILL

IWILL KK266plus-R Instrucciones de funcionamiento originales

IWILL

IWILL DK8N Manual de usuario

IWILL

IWILL K7S3 Series Manual de usuario

IWILL

IWILL BS100 Manual de usuario

IWILL

IWILL kv200 Manual de usuario

IWILL

IWILL DS133R Manual de usuario

IWILL

IWILL DGL200 Manual de usuario

IWILL

IWILL DVD266u-RN Manual de usuario

IWILL

IWILL KK400 Series Manual de usuario

IWILL

IWILL DX400-SN Manual de usuario

IWILL

IWILL VX133u Manual de usuario

IWILL

IWILL P4DA Manual de usuario

IWILL

IWILL P4R533 Manual de usuario

IWILL

IWILL P55XB2 Manual de usuario

IWILL

IWILL P55TV Manual de usuario

IWILL

IWILL DK8S Manual de usuario

IWILL

IWILL P6NS Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario