ITS Telecom Pancode VoIP Instrucciones de montaje
Pancode VoIP
Pantel VoIP
Access Control Door Phones
Installation and
Programming Manual
September 2010
Version 2 Release 11 ed2
Pancode VoIP/Pantel VoIP Access Control Door Phones
Installation and Programming Manual
NOTICE
This publication refers to the PANCODE IP and Pantel IP Door Access Control devices, Firmware
Version 2.xx.
Additional copies of this manual may be obtained from ITS Ltd. Reproduction of this manual or parts
thereof without written permission from ITS is strictly prohibited.
ITS Ltd. reserves the right to modify the hardware and software described herein without prior notice.
However, changes made to the hardware or software described do not necessarily render this
publication invalid.
WARRANTY
In the event that the product proves to be defective in workmanship or materials within a period of
one year from date of shipment, ITS Ltd. shall repair or replace the same at its discretion. Transportation
will be the responsibility of the dealer/distributor.
Under no circumstances shall ITS Ltd. be liable for consequential or special damages, loss
of revenue or user/dealer expenses arising out of or in connection with the use or
performance of the product, whether base on contract, tort or any other legal agreement.
The following shall void the above warranty: malfunctions resulting from fire, accident, neglect, abuse or
acts of God; use of improper electrical power; or repair of, tampering with or alteration of the product
by anyone other than ITS authorized.
Pancode VoIP/Pantel VoIP Access Control Door Phones
Installation and Programming Manual
Table of Contents
1. Introduction ...............................................................................................................................................2
1.1 Pancode VoIP/Pantel VoIP Kit Contents............................................................................................3
2. Physical Description....................................................................................................................................4
2.1 Pancode VoIP Front Panel ................................................................................................................4
2.2 Pantel VoIP Front Panel....................................................................................................................5
3. Installation .................................................................................................................................................6
3.1 Pancode VoIP/Pantel VoIP Schematic Setup .....................................................................................8
4. Installing the Pantel VoIP/Pancode VoIP ......................................................................................................9
4.1 Installing the Video Camera (Optional) ..........................................................................................14
4.1.1 Installing the analog Video Camera ..................................................................................14
4.1.2 Installing the IP Networking Video Camera .......................................................................17
4.1.3 Web view .........................................................................................................................24
4.2 Adjacent Access Control Device.....................................................................................................27
5. Programming ...........................................................................................................................................29
5.1 Searching for a Device in LAN........................................................................................................30
5.2 Scanning for a Device in the Network............................................................................................32
5.3 Application Interface .....................................................................................................................33
5.4 System Parameters ........................................................................................................................35
5.5 VoIP Dialing settings......................................................................................................................38
6. Firmware/Software Upgrade.....................................................................................................................42
6.1 Firmware/Software Upgrade Procedure .........................................................................................42
7. Technical Specification .............................................................................................................................44
7.1 Analog Video Camera Technical Specification ...............................................................................45
7.2 Network Server Technical Specification..........................................................................................46
1
Pancode VoIP/Pantel VoIP Access Control Door Phones
Installation and Programming Manual
1. Introduction
This guide provides installation and programming instructions for the following products:
Pancode VoIP outdoor piezo keypad unit
Pantel VoIP outdoor piezo keypad unit
The Pancode VoIP and Pantel VoIP are smart wall-mounted and flush-mounted access control door phones
connected to a local Voice Over IP (VoIP) network of a VoIP PBX, allowing door entry control. They are available
for outdoor installation in an aluminum unit with a piezo keypad.
The Pancode VoIP and Pantel VoIP have the following features:
Feature Pancode VoIP Pantel VoIP
Integration with local LAN and VoIP networks UU
Authorized registration with existing VoIP switching system (Proxy) UU
Two different operation modes:
Standard – for direct dialing to any destination number
Speed-dial – for one-touch dialing to internal or external subscribers
UX
Automatic busy & disconnect detection UU
Door opening from any extension UU
Door opening from Bypass Switch button UU
Programmable day and night destinations UU
High quality speakerphone with separate volume control UU
Entry access code (supports up to ten codes) UX
Works in conjunction with card readers and security devices UU
Programming via Ethernet interface using a web-based GUI application UU
Acoustic echo canceller UU
Automatic gain control (AGC) UU
SRTP (encryption and authentication) UU
Support for analog video (optional) UU
Support for video over IP (MPEG 4) (optional) UU
Internal network switch UU
Smart looking durable design UU
Software upgrade UU
2
Pancode VoIP/Pantel VoIP Access Control Door Phones
Installation and Programming Manual
1.1 Pancode VoIP/Pantel VoIP Kit Contents
The contents of the Pancode VoIP/Pantel VoIP are as follows:
Pancode VoIP or Pantel VoIP unit
External 12V AC power supply for the device with / without analog video camera
External 12V DC power supply for devices with internal video camera and IP video server (Video
Over IP feature)
Ethernet cable
Installation CD
Device is available with internal B&W or color video camera and
internal network video server.
Video camera and network server must be ordered separately.
Device accomplished with the IP (Video over IP)
internal video camera and video server supplied
with the 12 V DC external power supply. Check
the power supply connections polarity. Incorrect
connectivity can destroy device.
Device accomplished with the analog internal
video camera supplied with the 12 V AC external
power supply.
3
Pancode VoIP/Pantel VoIP Access Control Door Phones
Installation and Programming Manual
2. Physical Description
The Pancode VoIP and Pantel VoIP are attached to the wall using a bracket and screws. These units are
hardwired and powered by an external 12V AC transformer, included in the package. The Pancode VoIP and
Pantel VoIP dimensions are:
Height: – 19.4 cm
Width: – 10.2
Flush Mounted unit dimensions are:
Flush Panel:13.8 x 23.3cm / 5.4 x 0.9 inch
Flush Mounted part: 9.8 x 19 x 2.5 cm/3.8 x 7.5 x 0.9 inch
2.1 Pancode VoIP Front Panel
The front panel of the Pancode VoIP unit contains a built-in speaker, a microphone, touch-keypad and
internal video camera hole (optional) (Figure 2-1).
Figure 2-1. Pancode VoIP Front Panel
4
Pancode VoIP/Pantel VoIP Access Control Door Phones
Installation and Programming Manual
2.2 Pantel VoIP Front Panel
The front panel of the Pantel VoIP unit contains a built-in speaker, a microphone, call button and internal
video camera hole (optional) (Figure 2-2).
Figure 2-2. Pantel VoIP Front Panel
5
Pancode VoIP/Pantel VoIP Access Control Door Phones
Installation and Programming Manual
3. Installation
The Pantel VoIP/Pancode VoIP is mounted on the provided installation bracket. This mounting bracket should be
installed as shown in Figure 3-1.
Figure 3-1. Installation Bracket
To install the wall bracket:
a. Measure and mark the location on the wall where the holes will be drilled for the mounting bracket.
b. Drill the holes and insert the wall anchors into the holes.
c. Attach the mounting bracket using the provided wall screws.
If your Pantel/Pancode unit is equipped with a designated flush mounting adaptor (See Figure 3-2 ), install the
unit as follows:
•Carve a 2.5 cm cavity in the wall.
•Insert the adaptor into the cavity and screw it with four screws to the wall.
•Place the adapter into the cavity.
•Place the unit into the adaptor and attach it to the frame using four screws, as displayed in Figure 3-3.
Make sure that the screwing holes are clean of wall dust, because it will make the unscrewing of the
unit very difficult.
6
Pancode VoIP/Pantel VoIP Access Control Door Phones
Installation and Programming Manual
Figure 3-2. Installation Adaptor
Depth: 2.5 cm
Figure 3-3. Unit Installation
After installation, you can now program the Pantel/Pancode VoIP unit.
7
Pancode VoIP/Pantel VoIP Access Control Door Phones
Installation and Programming Manual
3.1 Pancode VoIP/Pantel VoIP Schematic Setup
The Pancode VoIP/Pantel VoIP unit is connected to the VoIP PBX as a SIP extension or via any IP router (Network
HUB, Switch etc). The unit powers the door lock, provided it is powered by an external supply and not PoE. The
unit includes the internal 2 port’s network switch which allows connecting additional network equipment (PC,
Internal or External video IP server etc…) directly via VoIP Pancode / Pantel. Figure 3-4 details the unit schematic
setup.
Figure 3-4. Schematic Setup
8
Otros manuales para Pancode VoIP
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Sistema de intercomunicación de ITS Telecom
