iSecus G600 Manual de usuario
Smart Security System
User Guide
CONTENTS
1 ABOUT THIS GUIDE
1 OVERVIEW
1 IN THE BOX
2 HOW ALARM SYTEM WORKS
3 AT A GLANCE
3 Smart Hub/Panel
9 Remote Tag (Wireless Key)
10 Door/Window Sensor
11 PIR Motion Detector
12 PLACEMENT/INSTALLATION
12 Where to Place/Install Smart Hub
12 Where to Place Door/Window Sensor
13 How to Install PIR Motion Detector
14 Hardwired Zone Connections
15 GETTING STARTED
15 Download and Install APP
15 Connect to Wi-Fi
15 Cellular Network Connection
16 How to Set Phone Numbers
17 Pairing With Wireless Accessories
17 How to Record a Voice Message
18 How to Add Fingerprints
18 How to Connect a Wireless Siren
19 USING SMART SECURITY SYSTEM
19 The Security Levels
20 Arm/Disarm
21 Make a Call on Panel
21 USING APP
21 Adjust Some Settings
22 Sensor/Zone Response Type Definitions
23 Name a Accessory
22 RESET TO FACTORY SETTINGS
23 SPECIFICATIONS
1
ABOUT THIS GUIDE
This guide is for:
Hub basic model ( Hub 2G+Wi-Fi , Hub 4G+Wi-Fi with SOS button model )
Hub fingerprint model ( Hub 2G+Wi-Fi , Hub 4G+Wi-Fi with fingerprint sensor model )
OVERVIEW
The hub cellular+Wi-Fi model is a dual network system that utilizes both Wi-Fi 802.11 b/g/n(2.4GHz)
and cellular(GSM or 4G).
On hub fingerprint model, you can use the sensor to read your fingerprint, instead of using your
passcode to unlock your hub. The home screen shows you current temperature and humidity got from
Location Services.
Up to 100 wireless sensors, 4 hardwired zones, 10 remote tags, multiple wireless sirens and an
external siren can be connected to the hub.In the event of alarm activation, for example, when a
sensor is triggered, the hub internal siren sounds at 80dB on-site,an optional external or wireless siren
sounds at 100dB, and a push notification will be sent and an alarm call will be made automatically to
all registered users.
The system can be armed/disarmed on-site by your fingerprint, touch panel, the remote tag supplied,
or remotely from anywhere with our free dedicated mobile application.
If the building has lost electrical power, the backup battery built-in the hub provides power operation
up to 3 hours.
IN THE BOX
Alarm Panel/Hub x1
Power Adapter and Cable x1
Remote Tag x2
Door/Window Sensor x1
PIR Motion Detector x1
User Guide x1
External Siren ( Optional )
Wireless Siren ( Optional )
2
HOW ALARM SYSTEM WORKS
The hub internal siren
sounds at 85dB on-site, and
an optional external siren
sounds at 100dB.
The hub sends a push notification
and text message to your phone
when a sensor is triggered if you
enable the notification function
located in your app settings. After
that the hub will also make phone
calls to each preset phone
numbers.
The hub receives the
command and enters
“Armed” mode.
Arm the system by the
remote, fingerprint, the ARM
button of hub or the APP.
When an optional external
wireless siren has been
placed there will be a signal
to be sent to the siren.
When a Door/Window Sensor
detects a door/window is being
opened, the sensor sends a
signal to the panel letting the
hub know that there has been
an intrusion.
The APP lets you know what’s
happening at home, anywhere,
any time.
3
AT A GLANCE
Smart Hub/Panel
Alarm, display, touchscreen, fingerprint reader and the brains of the system
1. Touchscreen. Show system status, time, current temperature and humidity and the alarm’s
information, select items.
2. Fingerprint sensor on fingerprint model. Use to read your fingerprint to unlock screen, arm
or disarm. Panic button on basic model. Press to instantly sound the alarm, send an
emergency alert to everyone.
1. Microphone. For monitoring and two-way talking.
2. Power button. When your hub is powered by built-in backup
battery, press and hold it until Bye appears to power your hub off.
Press and hold it until Hello appears to power your hub on.
3. Power port (Micro USB). Plug in the power cable here.
4. Siren port. Plug in the siren cable here.
1. Tamper switch. The tamper switch (lever underneath the bracket) will trigger an alarm
notification if an attempt is made to remove the hub from its installed location. And the alarm
sounds.
2. Speaker. For voice prompt and the alarm.
3. Regular SIM card receptacle. A regular SIM card is required to use cellular services when
connecting to GSM networks. Install SIM card into receptacle before getting started.
4. EOLR (End of Line Resistor) Hardwired Zones Connections (Reserved)
1
2
3
4
1
2
1
2
4
3
4
Home screen
1. Top status icons. Show you cellular and Wi-Fi network status, battery level, and more.
2. Calendar.
3. Current temperature.
4. Current humidity.
5. Dial button. Use to make a call.
6. Menu button. Use for settings, accessories, logs, Wi-Fi configuration, and more.
7. Home/Stay/Partial arm button. Use when you’re home and want security. The alarm sounds
when a door or window opens.
8. SOS button. Use in case of emergency. The alarm sounds and sends an alert notification to
registered users
9. Arm button. Use when no one is home. The alarm will sound in armed mode, when a door or
window opens, or when motion detected.
10. Disarm button. Use when you don’t want security by the system. The alarm won’t sound in
disarmed model.
11. Bottom status area. Show you system arm/disarm status, countdown bar, alarm information,
and more.
12. Lock screen button. Use to lock or turn off the screen.
Weather
The screen shows your local current temperature and humidity over the network and updates them
every 30 minutes when your hub has been connected to internet and your local Location Service is
available .
xx will be shown if the network isn’t available.
Note: Weather may not be available in all areas.
1
2
3
4
5
6
7
8
9
10
11
12
5
Top status icons
The icons in the status bar at the top of the screen give information about your hub
Bottom status area
Arm/Disarm status
Here’s the Arm/Home Arm/Disarm status of system.
Alarm information
Display what happened in case of alarm.
Status icon what you see
What it means
Cellular network
No SIM card inserted or SIM card faulty
Shows that your carrier’s cellular network is
available in case of white bars. More bars means
stronger signal. The bars are gray if not registered
with cellular network.
Wi-Fi network
Shows that the system is connected to a Wi-Fi
source and the signal strength when it is shown in
white. More bars means stronger connection.
Shows that the hub has a Wi-Fi Internet
connection when dot is shown.
SMS
Text message sending
Call
Calling
Lock keypad
The keypad is locked
Power
AC powered, and the progress bars shows in case
of charging.
Shows the battery level when the system has lost
AC power. The icon is red when the backup
battery power is low.
What you see
What it means
System is AWAY ARMED.
System is HOME ARMED.
System is DISARMED.
6
Countdown bar
Countdown bar lets you know which process happens and what you should do.
Quick view of menu features
Here are some approach icons. Tapping an icon can do different things.
What you see
What happens and what you should do
Please exit
You now have xx seconds to leave home before the Exit
Delay expires. When Exit Delay is completed, the alarm
system is armed.
Please disarm
You must disarm the system before Entry Delay expires, or an
alarm will go off.
Synchronizing
You must active the wireless transmitter to be paired before
the paring delay expires.
Icon
Item
What you can do with it
Menu
Settings
Delay
Exit Delay
Adjusting Exit Delay(1)(0~65535 seconds, default: 40)
Entry Delay
Adjusting Entry Delay(1)(0~65535 seconds, default: 30)
Siren Duration
Adjusting Siren Duration(0~65535 minutes, default: 3)
Switch
Turn on/off features
Arm Beep
Turning arm and disarm beep(2) on or off(default:on)
Siren
Turning alarm continuous siren on or off when an alarm occurs.
(default:on)
Arm/Disarm
SMS
Turning SMS notification on or off when the system arms or
disarms (default:off).
Keypad Lock
Turning touchscreen lock(3) on or off(default:off)
Backlight
Turning touchscreen backlight(4) on or off(default:off)
Keypad Tone
Turning operation chime on or off(default:on)
Delay Tick
Turning exit and entry chime on or off(default:on)
Human Voice
Turning Human Voice(5) on or off(default:on)
Door/Window
Open Warning
Turning warning notification on or off if you leave a window or door
open and arm (default: on).
Sensor Low
Battery
Enable to receive notification when the wireless accessory is low
battery.
Password
System
Changing System Code(6)(4 digits, default: 8888)
7
User
Changing User Code(7)(4 digits, default: 1234)
Language
Language Selection(8)(default: English)
简体中文
English
Deutsch
РУССКИЙ
Español
Polski
Italiano
Français
Português
Ελληνικά
Românâ
Čeština
Initialization
Resetting to factory defaults(9)
Phone
Call-Phone
Number
Setting the Phone Number for call in case of alarm
SMS-Phone
Number
Setting the Phone Number for text message in case of alarm
Log
Alarm Log
Viewing system alarm events
Arm Log
Viewing system arm/disarm events
Parts
Paring, deleting/editing and deleting all accessories
Remote
Pairing, deleting and deleting all the remote tags
Detector
Pairing, editing, deleting and deleting all the wireless sensors
RFID
Reserved
Siren Learn
Sending a transmission signal to the wireless siren to be paired
Alarm Socket
Pairing a wireless switch that syncing on/off with the siren
Socket
Reserved
Decoder
Read the serial number of detector from its transmitting signal.
You can know which wireless accessory were paired in your hub by
this tool.
EOL Zone
Setting EOL (end of line resistor) wired zones mode
Smart Pairing
Pair a wireless accessory and its type can be identified
automatically after being read in.
Fingerprint
Adding, deleting and deleting all fingerprints.
Wi-Fi
(Available on hub cellular+Wi-Fi model only)
8
Here’re some of menus how to use.
Smartlink
Configure
Connecting your bub to the Wi-Fi network and internet by Smart
Configuration(Requires the mobile APP)
Unbind
Unbinding the hub link from the server
MAC/IP
Getting the MAC and IP addresses of the Wi-Fi module
SoftAP
Configure
Connecting your bub to the Wi-Fi network and internet by Soft AP
Configuration(Requires the mobile APP)
Record
Record
Recording voice message and playback
Play
Listening to the recorded message
Delete
Deleting the recorded message
Duration
Adjusting Record Duration (1-20 seconds is available)
Timer
Arm Schedule
Setting a schedule(in 24-hour) for arming automatically
Disarm
Schedule
Setting a schedule(in 24-hour) for disarming automatically
Zone&Sync
Reserved
Date&Time
Setting the local date and time(in 24-hour)
Wi-Fi Sync
Turning using the Wi-Fi network-provided time on or off
(hub cellular+Wi-Fi model only)
2G/4G Sync
Turning using the cellular network-provided time on or off
Version
Getting the firmware and Serial Number of hub, the firmware and
IMEI of the GSM module, and MAC address of the Wi-Fi module
(hub cellular+Wi-Fi model only)
Item
Caption
Description
1
Exit/Entry Delay
Your security system has been programmed with delay times
that allow you to exit the premises after arming, and to disarm
the system upon entry before an alarm occurs. If you leave
home too late when exiting, or disarm too late when arriving
home, it will cause a false alarm. If an false alarm occurs, you
should disarm the system immediately.
2
Arm Beep
When it is turned on, the external siren will beep when armed or
disarmed.
3
Keypad Lock
For additional security, you can require a passcode to unlock the
touchscreen. When it is turned on, if you don’t touch the screen
for 30 seconds or so, the touchscreen locks automatically.
4
Backlight
When it is turned off, if you don’t touch the screen on the home
screen for 30 seconds or so, the touchscreen backlight turns off
automatically.
Tabla de contenidos
Otros manuales de Sistema de seguridad de iSecus
Manuales populares de Sistema de seguridad de otras marcas
EDM
EDM Solution 6+6 Wireless-AE Manual de usuario
Highway Safety Group
Highway Safety Group EA401 Manual de usuario
Siren
Siren LED GSM Manual de usuario
Detection Systems
Detection Systems 7090i Instrucciones de montaje
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manual de usuario
Siemens
Siemens FDM273 Manual de usuario