IQAir AirVisual Pro Manual de usuario

User Guide

2
Table of contents
Introduction
Meet the AirVisual Pro........................ 3
Important Safety Instructions ........... 4
Operating instructions
Getting started...................................12
AirVisual Pro controls........................13
Home screen......................................14
Indoor screen .....................................16
Forecast screen .................................17
Recommendations screen................18
Advice and status icons....................19
Air Quality Index (AQI) icons ............ 20
CO2 icons........................................... 21
Care & maintenance ......................... 22
Air Quality introduction & FAQ’s
Air Quality Index (AQI) ..................... 23
PM2.5 introduction........................... 24
CO2 introduction ............................... 25
Temperature & humidity................... 26
FAQ - View PM2.5 concentration..... 27
FAQ - Factory reset ........................... 28
FAQ - Sleep mode.............................. 29
FAQ - Serial number.......................... 30
Join the AirVisual Community......... 31

3
Meet the AirVisual Pro
Congratulations!
You are about to take the rst step to improving the air you breathe!
The AirVisual Pro is a comprehensive solution to optimize health and wellbeing
through clean and fresh air.
By combining laser technology and articial intelligence, your AirVisual Pro
is able
to deliver immediate and accurate
air quality measurements, as well as intuitive
recommendations based on both your indoor and outdoor environments.
Use the AirVisual Pro to see invisible threats in your air and understand where they
come from. Learn more: iqair.com
Please study this User Guide carefully to familiarize yourself with the special
features and functions of this IQAir product. Keep this document in a safe place for
future reference.

4
WARNINGS
Do not drop, disassemble, open,
crush, bend, deform, puncture,
shred, microwave, incinerate, paint,
submerge in a liquid, damage,
modify, overload the outputs of
or insert foreign objects into the
product. Do not use the product
anymore if an object has fallen on
it or it has fallen on the oor.
Keep product out of the reach
of children. Children shall be
supervised when using the
product.
Do not expose product to heat,
re, rain or snow. Do not store in
direct sunlight or in a vehicle.
Do not use a damaged cable
or non-tting connector and do
not use or charge a damaged
product or a product with reduced
capacity of the internal battery.
In the event of leaking of internal
battery, keep away from skin and
eyes. Wash any affected area
with large amounts of water and
seek medical attention. In case of
damage or reduced capacity of
the internal battery take product
to a qualied service person/
manufacturer.
Important safety information

5
The product needs to be charged
before use. Do not leave the
product on prolonged charge
when not in use. Disconnect the
product from the charger/adapter
once full. Store the product in a
cool, dry place when not in use.
When the product is not used
for prolonged periods, it shall be
charged periodically in order to
maintain the internal battery’s life.
Do not use any charger/adapter
or cable other than that provided
by the manufacturer and do not
charge the product unattended.
Keep all instructions provided with
the product for future reference.
Equipment and accessories
are to be supplied by IQAir or its
agent only. Use of equipment,
components and accessories
other than those specied by
IQAir may impair the safety
provided by the equipment. This
equipment is to be operated with
provided accessories only. Safety
of any system incorporating the
equipment is the responsibility of
the installer of the system. If the
AirVisual Pro is used in a manner
not specied by the manufacturer,
the protection provided by the
equipment may be impaired.
Important safety information

6
This equipment is intended for use
at supply voltages with uctuations
not exceeding +/-10 % and
classied as over voltage category
II. This equipment is intended for
use in environments classied as
pollution degree 2 and it is not to
be stored or used in wet locations.
The USB adapter is not to be
positioned so that it is difcult to
be unplugged.
This equipment is to be cleaned
with a damp cleaning cloth with
warm water containing a drop
of dishwashing detergent. After
cleaning, dry it with a cloth.
CAUTION
The AirVisual Pro and its
accessories are not intended for
outdoor use. The AirVisual Pro
enclosure is not weatherproof or
waterproof. Any water that enters
the inner compartment will likely
severely damage the AirVisual Pro
and may present a safety hazard.
Before plugging the USB adapter
into a socket, check if voltage and
frequency corresponds to 100 to
240 V and to 50 to 60 Hz. Do not
use the equipment at altitudes
exceeding 2’000 meters (6’560
feet). DO NOT remove any parts
Important safety information

7
from the IQAir AirVisual Pro. There
are no outputs available from the
IQAir AirVisual Pro.
The AirVisual Pro and its USB
adapter is rated to operate
between -10°C and +40°C (14°F to
104°F) with humidity ranging from
0% to 95% non-condensing.
LASER SAFETY
The AirVisual Pro contains
a PM sensor module that is
classied as a Class 1 laser-based
instrument. DO NOT open the
PM sensor inside AirVisual Pro.
During normal operation, you will
not be exposed to laser radiation.
When operated according to the
manufacturer’s instruction, this
device is a Class 1 laser product
as dened by U.S. Department
of Health and Human Services
standards under the Radiation
Control for Health and Safety Act
of 1968.
Important safety information

8
Important safety information
WARNING The use of controls,
adjustments, or procedures
other than those specied in this
manual may result in exposure to
hazardous optical radiation.
FCC Statement
Any changes or modications not
expressly approved by the party
responsible for compliance could
void the user’s authority to operate
the equipment.
Note: This equipment has been
tested and found to comply with the
limits for a Class B digital device,
pursuant to part 15 of the FCC
Rules. These limits are designed
to provide reasonable protection
against harmful interference in
a residential installation. This
equipment generates, uses and can
radiate radio frequency energy and, if
not installed and used in accordance

9
Important safety information
with the instructions, may cause
harmful interference to radio
communications. However, there is
no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and
on, the user is encouraged to try to
correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving
antenna;
• Increase the separation between
the equipment and receiver;
• Connect the equipment to an outlet
of a circuit different from that to
which the receiver is connected;
• Consult the dealer or an
experienced radio/TV technician
for help.

10
ISED RSS notice - Avis d’ISDE
RSS
This device complies with ISED
licence exempt RSS standard(s).
Operation is subject to the following
two conditions: (1) this device may
not cause interference and (2) this
device must accept any interference,
including interference that may
cause undesired operation of the
device.
Cet appareil est conforme aux
normes RSS exemptes de licence
d’ISDE. Son fonctionnement
est soumis aux deux conditions
suivantes: (1) cet appareil ne doit
pas provoquer d’interférences
et (2) cet appareil doit accepter
toute interférence, y compris les
interférences susceptibles d’entraîner
un fonctionnement indésirable de
l’appareil.
ISED Radiation Exposure Statement
- Déclaration d’ISDE sur l’exposition
aux radiations
This equipment complies with ISED
RF radiation exposure limits set forth
for an uncontrolled environment. This
transmitter must not be co-located
or operating in conjunction with any
other antenna or transmitter.
Cet équipement est conforme
Important safety information
Otros manuales para AirVisual Pro
3
Tabla de contenidos
Otros manuales de Instrumento de medición de IQAir
Manuales populares de Instrumento de medición de otras marcas

Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER
KLINGER CMF V Series Manual de usuario

EXFO
EXFO FTB-2 Manual de operación y mantenimiento

Keysight
Keysight M8290A Manual de usuario

ADTEK
ADTEK MW-5 Manual de usuario















