I+ME ACTIA I+ME ACTIA NetPorty II Manual de usuario
Welcome to I+ME ACTIA !
Before acquainting you with your new I+ME Hardware
we would first like to thank you for purchasing our
product. We are extremely pleased that you have
chosen to place your trust in I+ME ACTIA and will do
our best to satisfy whatever needs you may have. The
following is a brief explanation highlighting our
background, areas of expertise and general product
lines. This products and the list of our world-wide
branch offices show that you have found a competent
partner in I+ME ACTIA.
Since its foundation in 1986, I+ME ACTIA has made
quite a name for itself. Our employees are dedicated to
producing high-quality solutions in the field bus and
multiplexed systems sectors. The knowledge of our
experts allows to develop a spectrum of products which
have been used in the automotive field as well as in
general industrial environments. Our products can be
used in all phases of system development: system
definition, prototyping, evaluation and field application.
Informatik und MikroElektronik
Whether your professional background is into industry-
process-control or development and test tools, we offer
six product groups to fulfill your sophisticated needs.
Tried and tested under the most severe conditions the
automotive industry has to offer, our products have
proved themselves again and again.
Our six products groups are:
1 CAN System Test & Design Tools
Support of various user ap-
plication phases: Learning, proto-
typing, testing and evaluation of
networked systems. Comfortable
Real-Time simulation of message
transfer characteristics in CAN
networks. Tools for mobile
diagnosis and tests.
2 CAN PC Interfaces
Easy interfacing between PCs,
Laptops, notebooks and networks
with automotive fieldbus – proto-
cols. Available for all PC standard
interfaces such as ISA-slot, PCI,
backplane, RS232, Centronics
and PCMCIA. Development of
applications under DOS/Windows according to Real-
Time requirements is supported
3 CAN Industrial I/O NiPC is an intelligent hardware
concept for sensor / actuator inter-
facing. A modular architecture al-
lows the flexible change target
micro controllers for process
control.
4 CAN System Application Software
Enabling Real-Time system
modeling, testing of networked
systems as well as application
support. Offering basic services
for network communication which
is applicable for various
processors and programming
languages. Facilitating the application interface for
distributed industrial process control according to the
CAL standard by CiA. Support of Windows 3.1,
Windows 95 & NT.
5 CAN System Know How
Promoting the understanding of
various network protocols in
practice. Understanding of CAN
networks with CAL in practice.
Developing HW/SW solutions for
customer specific problems. We
offer CAN / CAL workshops and
in-house seminars to enable CAN
users to benefit from I+ME
ACTIA’s extensive knowledge.
6 Automotive Diagnostics
Assistance during the development
phases. Diagnostic tools for quality
control in production lines as well as
after sales diagnostic, control and
servicing tools are provided to
manufacturers, suppliers and dealers
of the car industry by I+ME ACTIA.
If you have any questions concerning our products or
you look for specific solutions within our product groups,
don’t hesitate to call us and benefit from I+ME’s
extensive knowledge - your need is our desire.
Our merger with the french corporation ACTIA in 1995
allowed us to become a powerful supplier for the
European automotive industry. ACTIA products include
diagnostic systems for automotive service and
maintenance as well as development and production of
high-quality on-board electronics. joining forces with
ACTIA has enabled I+ME to better service it’s
international customers not only in Europe, but
throughout the world.
Headquarter: Office Stuttgart:
I+ME ACTIA GmbH I+ME ACTIA GmbH
Rebenring 33 Zettachring 4, 1.OG
38106 Braunschweig 70567 Stuttgart
Germany Germany
T: +49 531 38701 0 T: +49 711 72874 45
F::+49 531 38701 88 F: +49 711 72874 46
ACTIA SA
ACTIA INC.
AiXIA SA DAIWA SANKO
INDUSTRADE AG
NOHAU ELEK. AB
NOHAU UK LTD.
SI-KWADRAAT
I+ME
WORLDWIDE REPRESENTATIVES
I+ME ACTIA Representatives
SI-KWADRAAT ACTIA SA
Nuenen, Netherlands Toulouse, France
T: +31 40 2631185 T: +33 05 61176161
F: +31 40 2838092 F: +33 05 61554231
NOHAU ELEK. AB ACTIA INC.
Malmö, Sweden Bedford, Texas USA
T: +46 40 592200 T: +1 817 5710435
F: +46 40 592229 F: +1 817 3559513
If needed, please contact our associates below.
ATAL SPOL SRO ACTIA DO BRASIL
Tabor, Czech Rep. Porte Alegre, Brazil
T: +420 361 251791 T: +55 51 9699802
F: +420 361 23043 F: +55 51 3411989
ATON SYSTEMS SA ACVIBUS SA
France Mexico
T: +33 01 42071800 T: +525 368 6169
F: +33 01 42078555 F: +525 368 5646
VIDEOBUS SA
Madrid, Spain
T: +34 1 5001950
F: +34 1 5000607
Manual
NetPorty II
Contents
1 Introduction......................................... 1-1
1.1 Your I+ME NetPorty II ......................................1-2
1.2 System Requirements......................................1-4
1.3 Delivery Contents .............................................1-5
1.3.1 Standard................................................1-5
1.3.2 Supplementary Support........................1-5
1.4 Technical Specifications...................................1-6
2 Installation........................................... 2-1
2.1 Overview...........................................................2-2
2.2 Installing the Hardware.....................................2-2
2.3 Installing the Software......................................2-4
2.3.1 If you start at serial port ........................2-4
2.3.2 If you start at parallel port .....................2-5
3 Hardware ............................................. 3-1
3.1 Micro controller.................................................3-2
3.2 Memory.............................................................3-3
3.2.1 NetPorty II internal buffers:...................3-3
3.3 Protocol Interface .............................................3-4
3.4 Physical Interface.............................................3-5
3.5 Optical interface................................................3-5
3.6 Connector.........................................................3-6
3.6.1 9pol sub-min-D male.............................3-6
3.6.1.1 1 CAN Channel..................................3-6
3.6.1.2 More than 1 CAN Channel ................3-8
3.6.2 25pol sub-min-D male.........................3-10
3.6.3 Cable set for serial connection............3-11
3.6.4 Power Supply......................................3-12
4 Troubleshooting & Techn. Support... 4-1
4.1 What to do if you have problems......................4-2
4.1.1 Solutions for all parts ... ........................4-3
4.1.2 Solutions for PCMCIA...........................4-4
1.1.1 Non-Supported PCMCIA Drives ...........4-5
4.1.3 Solutions for NetPorty II........................4-6
5 Glossary.............................................. 5-1
6 Literature............................................. 6-1
A LevelX API
B LevelX Demos
C PcCANControl
Administration of Document
Document version: 1.05
Tabla de contenidos
Manuales populares de Hardware de computadora de otras marcas
EMC2
EMC2 VNX Series Manual del propietario
Panasonic
Panasonic DV0PM20105 Manual de usuario
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manual de usuario
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manual de usuario
Raidon
Raidon iT2300 Manual de usuario
National Instruments
National Instruments PXI-8186 Manual de usuario
