IOptron Pier Manual de usuario

iOptron®Pier

Instruction Manual

Product #8030, #8033

iOptron®Pier is designed for iOptron GOTO

mounts, which includes iEQ45, iEQ30,

MiniTower, MiniTower II, or MiniTower Pro

mount.

Parts included1:

1. 1x Pier Tube

2. 1x Pier Base with three (3) Pier Legs

preinstalled

3. iEQ45 Center Stud and Alignment Peg

(preinstalled)

4. 1x M12 Center Bolt with turning lever for

MiniTower/MiniTower Pro mounting

5. 1x iEQ30 Alignment Peg

Specifications:

#8030 48 inch tall pier:

yPier diameter: 5.7" (144mm) with 6"

(150mm) Flange plates

yPier height: 40” (1016mm)

yStanding height:48” (1220 mm)

yLeg length: 22.5” (570mm)

yNet weight: 25 lbs (11.3 kg)

yPayload: 132 lbs (60kg)

#8033 42 inch tall pier:

yPier diameter: 5.7" (144mm) with 6"

(150mm) Flange plates

yPier height: 34” (840mm)

yStanding height:42” (1066mm)

yLeg length: 22.5” (570mm)

yNet weight: 23 lbs (10.4 kg)

yPayload: 132 lbs (60kg)

Pier Setup:

iOptron pier comes in a single box. For #8030 (48”

pier), all the parts are stored inside the pier tube, as

shown in Fig.1. For #8033 (42” pier), three (3) poll

rods may slide into the pier tube, but not as secure

as #8030.

Figure 1

1Parts included may be different from the list and photos.

Unthread the Pier Locking Screw (This screw is

only used for pier storage). Separate the Pier

Base with Legs from the Pier Tube. Remove the

Pull Rods from inside the pier.

Figure 2

Figure 3

Move the Pier Foot from the end to the side.

Figure 4

Spread the Pier Leg. Put the Pier Tube onto the

Pier Base, with Pier Alignment Slot aligned over the

Alignment Tab on the Pier Base.

Pull Rods

Pier Foot

(Storage

Position)

Pier Base

Pier Tube

Pier Locking

Screw

Figure 5

Adjust the length of the three Pull Rods. Hook one

end of a Pull Rod onto a bolt located on the Pier

Leg and the other Pull Rod end onto the mounting

beam inside the Pier Tube. Evenly tighten the Pull

Rods. Make sure there is no gap between the Pier

Base and Pier Tube.

Figure 6

There are three sets of holes/threads on top flange

of the pier. They are designed for mounting an

iEQ45, an iEQ30 or a MiniTower series mount, as

indicated in Figure 7.

Figure 7 Pier with Alignment Peg and Center Stud

for iEQ45

To install an iEQ45 mount onto the pier, just simply

face the alignment peg north (if you are located in

northern hemisphere), and install the iEQ45 mount.

Tighten 3 Azimuth Locking Screws.

Figure 8 iEQ45 on a pier

To install an iEQ30 mount onto the pier, remove the

iEQ45 alignment peg. Thread an iEQ30 alignment

peg into the middle threaded hole located on inner

circle. Then face the alignment peg north (if you are

Tighten evenly

Adjustable Feet

Pier Leg

Pier Base

Align Slot

Align Tab

For iEQ45 Azimuth

Lockin

Screw Alignment

Peg

Center

Stud

located in northern hemisphere), and install the

iEQ30 mount. Tighten 2 Azimuth Locking Screws.

Figure 9 Pier with Alignment Peg and Center Stud

for iEQ30

Figure 10 iEQ30 on a pier

To install a MiniTower series mount (MiniTower,

MiniTower II or MiniTower Pro) onto the pier,

remove the top flange from the Pier Tube by

remove three mounting screws. Remove iEQ

Center Stud and Alignment Peg. Insert the

MiniTower Center Bolt through the center hole.

Install the Turning Lever. Mount the Top Flange

back to the Pier Tube.

Figure 11 Pier with MiniTower Center Bolt

Install 3 MiniTower level adjustment screws and

threaded in about half of the threads. Put the

MiniTower on to it. Level it. Thread the MiniTower

Center Bolt into the MiniTower and tighten it. Make

sure the mount is leveled while rotating the mount.

Figure 12 MiniTower on a Pier

For iEQ30 Azimuth

Lockin

Screw For MiniTower

Levelin

Screws Center Bolt

Este manual sirve para los siguientes modelos

Otros manuales de Rack y soporte de iOptron

iOptron

iOptron CEM25 Manual de usuario

iOptron

iOptron CEM60 Manual de usuario

iOptron

iOptron GEM45EC Manual de usuario

iOptron

iOptron SkyGuide 3550A Manual de usuario

iOptron

iOptron CEM40 Manual de usuario

iOptron

iOptron Precision AZ/EQ Base Manual de usuario

iOptron

iOptron CEM26 Manual de usuario

iOptron

iOptron CEM40EC Manual de usuario

iOptron

iOptron HAE29 Manual de usuario

iOptron

iOptron CEM120 Manual de usuario

iOptron

iOptron HEM44 Series Manual de usuario

iOptron

iOptron HAZ31 Manual de usuario

iOptron

iOptron iEQ30 Pro 3000E Manual de usuario

iOptron

iOptron GEM28 Manual de usuario

iOptron

iOptron MiniPier Manual de usuario

iOptron

iOptron SmartStar CubePro GOTO AltAz Manual de usuario

iOptron

iOptron NI63385 Manual de usuario

iOptron

iOptron iEQ30 Pro 3000E Manual de usuario

iOptron

iOptron SkyHunter Portable EQ/AZ GoTo System Manual de usuario

iOptron

iOptron CEM25P Manual de usuario

iOptron

iOptron CEM40 Manual de usuario

iOptron

iOptron GEM28 Manual de usuario

iOptron

iOptron HEM27 Manual de usuario

iOptron

iOptron MiniTower GOTO Manual de usuario

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

Pyle

Pyle PMKSPAD1 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario

iOptron Pier Manual de usuario

Manuales populares de Rack y soporte de otras marcas