Iomega 100D Manual de usuario

Network Attached

Storage Server 100d

Quick Start Guide

Contents

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Quick Install . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Package Contents

100 d

Network Attached

Storage

100 Series Server

Quick Install

Installation rapide

Schnellstart

Installazione rapida

Instalación rápida

Default Settings

100 d

• DHCP client enabled

• Default IP Address on networks without DHCP: 169.254.10.10

• Wireless access point enabled

• Default wireless SSID: IOMEGA_NAS



Quick Install







For best performance and easiest configuration, Iomega recommends connecting the Iomega NAS 100d to

a wired network. For instructions on configuring the Iomega NAS via a wireless connection, see the user's

manual on the Solutions CD.

Connect the included Ethernet cable to the Iomega

NAS and to an open network port on your router,

switch, or hub.

Connect the power supply to the Iomega NAS and

then to a power strip or outlet.

Press the power button on the back panel of the

Iomega NAS.

NOTE: The Iomega NAS will take a couple of

minutes to start up. Please wait until the Power

LED changes to solid blue before proceeding.

If your network does not have a DHCP

server, change your computer’s IP address

to 169.254.10.85 with a subnet mask of

255.255.0.0. The default IP address of the Iomega

NAS is 169.254.10.10. For more information on

changing your computer’s IP address, see page 7.

If you have a problem, we can help. Please do NOT return this product to the store!

Your answer is on the web. Visit our award-winning web support site www.iomega.com.

Select your region, then select Support.

Start Up

Mise en route

Start

Inicio

Inicialização

Instalación

www.iomega.com

Network

Hard Drive

Windows

Mac

Avvio









Insert the Solutions CD and follow the instructions

onscreen to register your Iomega NAS.

Launch the Iomega NAS Discovery utility.

NOTE: Iomega NAS Discovery is available for

Windows only. If you are using a Macintosh to

configure the Iomega NAS, please see the user’s

manual on the Solutions CD.

Select your Iomega NAS in the Discovery window.

If your NAS is not listed, see Troubleshooting on

page 7.

Click the Manage button, then log into the Iomega

NAS for advanced configuration.

User name: admin (case sensitive)

Password: (Leave the password blank)

Click on Configuration, then select NAS ID. In the

Device Name field, enter a new name for your

Iomega NAS.

NOTE: Choose a name that is easy to remember.

The device name will make it easier to connect to

the Iomega NAS.









Click on the IP Settings button.

Configure the IP Settings of the Iomega NAS to

match your network, then click the Apply button.

The Iomega NAS is configured by default to act as

a wireless access point. If you wish to connect to

the Iomega NAS from wireless clients and do not

already have a wireless access point, no change is

necessary; however, you will need to connect the

antenna to the Iomega NAS.

Make any other desired configuration changes. See the user’s manual on the Solutions CD or the

help system for more information on Iomega NAS 100d configuration options.

If you already have a wireless access point or

do not wish to allow wireless clients to connect

to the NAS, click on the Wireless tab, deselect

the Wireless check box, and then click the Apply

button.

Troubleshooting

Changing Your Computer’s IP Address (Windows Users)

1. Right click on My Network Places or Network Neighborhood, then select Properties.

2. Right click on your LAN connection, then select Properties.

3. Select Internet Protocol (TCP/IP), then select Properties.

4. Write down the the current network settings.

5. On the General Tab, click on Use the following IP address:.

6. Change the IP address and subnet mask

7. Click OK.

8. Click OK.

I Cannot Configure the Iomega NAS

• Make sure all cable connectors are securely inserted in the proper ports.

• Make sure that the Iomega NAS has started up (The Power LED is solid blue).

• If your network is not running DHCP, assign your client computer an IP address in the 169.254.*.*

range with a subnet mask of 255.255.0.0.

• Disable any personal firewall software on the client computer.

• If you have multiple network connections, disable all but one network connection on the client

computer.

• Enter the IP address of your Iomega NAS in your web browser’s URL line (http://169.254.10.10 is

the default IP address on networks without a DHCP server). If you have a DHCP server, look for the

Iomega NAS in the server’s DHCP client list. See your router or DHCP server’s documentation for more

information.

• See the user’s manual included on the Solutions CD for more Troubleshooting steps.

Customer Support

For service and support for your Iomega product, visit us at www.iomega.com.

d31336500 04/04/05 b

Copyright © 2005 Iomega Corporation. All rights reserved. Iomega, the stylized “i” logo, and all Iomega brand blocks are either registered trademarks or trademarks of Iomega Corporation in the United States

and/or other countries. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Apple and Macintosh are either registered

trademarks or trademarks of Apple Computer, Inc. in the United States and/or other countries. Certain other product names, brand names, and company names may be trademarks or designations of their

respective owners.

Tabla de contenidos

Otros manuales de Servidor de almacenamiento en red de Iomega

Iomega

Iomega StorCenter ix4-200d Manual de usuario

Iomega

Iomega 34571 - Home Media 2 TB Network Attached... Manual de usuario

Iomega

Iomega Ix2-200 - StorCenter Network Storage NAS... Manual de usuario

Iomega

Iomega 34208 - Storcenter Pro 200RL Nas 3TB 4X750GB Sata II Raid 0/0+1/5... Manual de usuario

Iomega

Iomega P400u - 32371 NAS 7200 RPM 160 GB Server Manual de usuario

Iomega

Iomega 33469 - StorCenter Pro NAS 450r Server 1TB WSS 2003 R2... Manual de usuario

Iomega

Iomega 33252 - NAS 300R SERIES 500GB Manual de usuario

Iomega

Iomega 1562 Manual de usuario

Iomega

Iomega 33784 - Gigabit Ethernet 1HD X 500GB StorCenter Network... Manual de usuario

Iomega

Iomega StorCenter px6-300d Manual de usuario

Iomega

Iomega 33271 - StorCenter Network Hard Drive Manual de usuario

Iomega

Iomega 34340 - StorCenter Pro ix4-100 NAS Server Manual de usuario

Iomega

Iomega StorCenter ix4-200d Manual de usuario

Iomega

Iomega 33459 - StorCenter Pro NAS 250d/500GB Server Manual de usuario

Iomega

Iomega 33610 - 1TB StorCenter Pro NAS 150d Server Manual de usuario

Iomega

Iomega 33244 - NAS 200d/750GB With Print Server Manual de usuario

Iomega

Iomega 33451 - StorCenter Pro NAS 400r/2TB Server Manual de usuario

Manuales populares de Servidor de almacenamiento en red de otras marcas

HP NetStorage 6000 Manual de usuario

Seagate

Seagate U10 ST320423A Manual de usuario

Synology

Synology RackStation RS816 Manual

D-Link

D-Link ShareCenter Pro DNS-1200-05 Manual de usuario

Avid Technology

Avid Technology VideoRAID ST Guía de seguridad

Western Digital

Western Digital My Cloud Home Duo Manual de usuario

PrimeArray

PrimeArray 4xxx Manual de usuario

Buffalo

Buffalo TeraStation WSS WSH5010N6 Manual de usuario

Planex

Planex MZK-NAS01SG Manual de usuario

Intel

Intel SS4000-E - Entry Storage System NAS Server Manual de usuario

Synology

Synology RS2212+ Manual de usuario

Allnet

Allnet ALL69000 Manual de usuario

Adaptec

Adaptec 5325301580 Manual de usuario

Motorola

Motorola EXORdisk II Manual de usuario

Sony

Sony XDAAI1PK Manual de usuario

Cisco

Cisco Linksys NAS200 Instrucciones de funcionamiento originales

Sans Digital

Sans Digital MR4UT6G Manual de usuario

AIC

AIC FB128-LX Manual de usuario