Intermec EasyLan AW02 Manual de usuario

EasyLAN™ Wireless

Quick Start Guide

ii EasyLAN Wireless Quick Start Guide

Intermec Technologies Corporation

Corporate Headquarters

6001 36th Ave. W.

Everett, WA 98203

U.S.A.

www.intermec.com

The information contained herein is proprietary and is provided solely for the

purpose of allowing customers to operate and service Intermec-manufactured

equipment and is not to be released, reproduced, or used for any other purpose

without written permission of Intermec.

Information and specifications contained in this document are subject to change

without prior notice and do not represent a commitment on the part of Intermec

Technologies Corporation.

The word Intermec, the Intermec logo, Norand, ArciTech, CrossBar, Data

Collection Browser, dcBrowser, Duratherm, EasyADC, EasyCoder, EasyLAN,

Enterprise Wireless LAN, EZBuilder, Fingerprint, i-gistics, INCA (under license),

Intellitag, InterDriver, Intermec Printer Network Manager, IRL, JANUS,

LabelShop, Mobile Framework, MobileLAN, Nor*Ware, Pen*Key, Precision

Print, PrintSet, RoutePower, SmartSystems, TE 2000, Trakker Antares, and

Virtual Wedge are either trademarks or registered trademarks of Intermec

Technologies Corporation.

This product includes software developed by the OpenSSL Project for use in the

OpenSSL Toolkit (http://www.openssl.org/).

This product includes cryptographic software written by Eric Young

([email protected]).

Throughout this manual, trademarked names may be used. Rather than put a

trademark (™or ®) symbol in every occurrence of a trademarked name, we state

that we are using the names only in an editorial fashion, and to the benefit of the

trademark owner, with no intention of infringement.

There are U.S. and foreign patents pending.

EasyLAN Wireless Quick Start Guide iii

Contents

Getting Started ......................................................................... 5

What’s New in Firmware Version 4.35? ..................... 6

Out of the Box ........................................................... 6

System Requirements ................................................. 7

Identifying EasyLAN Wireless Components .............10

Installing EasyLAN Wireless................................................... 11

Collecting Information............................................. 12

Connecting EasyLAN Wireless to Your PC .............. 14

Setting Network Communications and Security ....... 14

Attaching the Antenna.............................................. 16

Starting EasyLAN Wireless ..................................................... 17

Printing Test Labels................................................................ 17

Configuring and Managing EasyLAN Wireless ...................... 20

iv EasyLAN Wireless Quick Start Guide

EasyLAN Wireless Quick Start Guide 5

Getting Started

The Intermec EasyLAN™Wireless Model AW02 is an IEEE

802.11b radio option that can be installed in the EasyCoder®

3400e, 4420, and 4440 printers.

The EasyLAN Wireless Model AW02 with

an IEEE 802.11b radio installed is Wi-Fi®

certified for interoperability with other

802.11b wireless LAN devices.

In an ad-hoc network, a printer with EasyLAN Wireless

communicates wirelessly with a PC that contains an 802.11b/g

radio. In an infrastructure network, a printer with EasyLAN

Wireless communicates with other wired and wireless devices via

an access point with an 802.11b/g radio.

Local

Area

Networ

Access

Point

EasyLAN

Wireless

printer

EasyLAN

Wireless

printer

Laptop computer with

802.11b radio

Laptop computer with

802.11b radio

Infrastructure Network

Ad-hoc Network

Network Illustration: This illustration shows EasyLAN Wireless printers in an

ad-hoc network and an infrastructure network.

6 EasyLAN Wireless Quick Start Guide

What’s New in Firmware Version 4.35?

EasyLAN Wireless Model AW02 firmware version 4.35 provides

these new features:

•The EasyLAN Wireless Model AW02 with an IEEE 802.11b

radio installed is Wi-Fi certified for interoperability with

other 802.11b wireless LAN devices. Because 802.11g radios

are compatible with 802.11b radios, the EasyLAN Wireless

can communicate with 802.11b/g devices. The connection

must be established with negotiated 802.11b data rates only.

•You can now use the web browser interface and a remote

TFTP server to reload or update your firmware. For help, see

the EasyLAN Wireless User’s Manual (P/N 074980).

•You can now set the Encryption Mode to Dynamic WEP,

WPA2, or WPA2-WPA. For help, see the EasyLAN Wireless

User’s Manual.

•You can now set your Authentication Type to PEAP. For

help, see the EasyLAN Wireless User’s Manual.

Out of the Box

Your printer with EasyLAN Wireless comes with these items:

•PrinterCompanion CD, which includes:

•EasyLAN Wireless User’s Manual (P/N 074980)

•EasyLAN Network Setup

•Intermec Printer Network Manager (IPNM)

•Intermec Print Monitor

•Printer quick start guide and safety supplement

•Antenna

•This EasyLAN Wireless Quick Start Guide (P/N 074981)

•Important EasyLAN Wireless Information! (P/N 074991)

EasyLAN Wireless Quick Start Guide 7

System Requirements

EasyLAN Wireless can communicate with 802.11b/g devices,

but the connection must be established with negotiated 802.11b

data rates only.

To set up printing through EasyLAN Wireless, you need to

know if you have an ad-hoc or infrastructure network:

•In an ad-hoc network, you need a PC with an 802.11b/g card

or other 802.11b/g device that prints straight to the printer.

•In an infrastructure network, you need an installed 802.11b/g

network that allows devices to print to the printer.

To use 802.1x security and TTLS, you need:

•an authentication server. You can use a PC with the Funk

Odyssey™RADIUS server software v1.1 or later. You can

use an Intermec MobileLAN™access point with software

v1.80 or later; for help, see the access point system manual.

Or, you can use a compatible authentication server.

•an authenticator that supports TTLS, such as an Intermec

MobileLAN access point with an 802.11b/g radio and

software v1.80 or later. The authenticator knows the IP

address and secret key of the authentication server and

translates TTLS frames to Remote Authentication Dial-In

User Service (RADIUS) frames and vice versa.

•a printer with EasyLAN Wireless Model AW02 running

firmware version 4.30 or later.

To use 802.1x security and LEAP, you need:

•an authentication server. You can use a PC with the Funk

Odyssey RADIUS server software v1.1 or later. You can use

an Intermec MobileLAN access point with software v1.80 or

later; for help, see the access point system manual. You can

use a Cisco 1230, 1231, or 1300 access point as a LEAP

authentication server as well as the authenticator.

•an authenticator that supports LEAP, such as a Cisco 1200

series or Cisco 350 series access point with an 802.11b/g

radio.

•a printer with EasyLAN Wireless Model AW02 running

firmware version 4.30 or later.

8 EasyLAN Wireless Quick Start Guide

To use 802.1x security and PEAP, you need:

•an authentication server. You can use a PC with the Funk

Odyssey RADIUS server software v1.1 or later. Or, you can

use a compatible authentication server.

•an authenticator that supports PEAP, such as an Intermec

MobileLAN access point with an 802.11b/g radio. The

authenticator knows the IP address and secret key of the

authentication server and translates PEAP frames to Remote

Authentication Dial-In User Service (RADIUS) frames and

vice versa.

•a printer with EasyLAN Wireless Model AW02 running

firmware version 4.32 or later.

To use WPA-Personal, you need:

•an access point that supports WPA-Personal (PSK). You can

use an Intermec MobileLAN access point with software v1.80

or later. For help, see the access point system manual.

•a printer with EasyLAN Wireless Model AW02 running

firmware version 4.30 or later.

To use WPA-Enterprise, you need:

•an authentication server. You can use a PC with the Funk

Odyssey RADIUS server software v1.1 or later. You can use

an Intermec MobileLANTM access point with software v1.80

or later; for help, see the access point system manual. Or, you

can use a compatible authentication server.

•an authenticator that supports both WPA and 802.1x, such as

an Intermec MobileLAN access point with an 802.11b/g

radio and software v1.80 or later. The authenticator knows

the IP address and secret key of the authentication server and

translates EAP frames to Remote Authentication Dial-In User

Service (RADIUS) frames and vice versa.

•a printer with EasyLAN Wireless Model AW02 running

firmware version 4.30 or later.

EasyLAN Wireless Quick Start Guide 9

To use WPA2-Personal, you need:

•an access point that supports WPA2, such as a Cisco 1230,

1231, or 1300 access point. For help, see the access point

system manual.

•a printer with EasyLAN Wireless Model AW02 running

firmware version 4.32 or later.

To use WPA2-Enterprise, you need:

•an authentication server. You can use a PC with the Funk

Odyssey RADIUS server software v1.1 or later. Or, you can

use a compatible authentication server.

•an authenticator that supports both WPA2 and 802.1x, such

as a Cisco 1230, 1231, or 1300 access point. For help, see the

access point system manual. The authenticator knows the IP

address and secret key of the authentication server and

translates EAP frames to Remote Authentication Dial-In User

Service (RADIUS) frames and vice versa.

•a printer with EasyLAN Wireless Model AW02 running

firmware version 4.32 or later.

10 EasyLAN Wireless Quick Start Guide

Identifying EasyLAN Wireless Components

Make sure you can identify the EasyLAN Wireless components

on the back of your printer.

Antenna

Serial

port

Orange LED

Green LED

Yellow LED

Test

switch

Antenna

connector

EasyLAN Wireless Components: This illustration shows what EasyLAN

Wireless looks like when it is installed in a 3400e printer.

Identifying EasyLAN Wireless Components

Component Description

Antenna

connector

Attach the antenna to this connector.

Serial port

(DB9)

Use this port only to configure EasyLAN Wireless

with the EasyLAN Network Setup configuration

wizard or the command console.

Test switch Use this switch to print a test label or reset EasyLAN

Wireless. For help, see “Printing Test Labels” on

page 17.

LEDs Three LEDs indicate status and diagnostic

information, as described in the next table.

Otros manuales para EasyLan AW02

Tabla de contenidos

Otros manuales de Impresora de Intermec

Intermec

Intermec PB40A Manual de usuario

Intermec

Intermec PC23 Manual de usuario

Intermec

Intermec EasyCoder C4 Manual de usuario

Intermec

Intermec EasyCoder C4 Manual de usuario

Intermec

Intermec EasyCoder 3400d Manual

Intermec

Intermec EasyCoder PF2i Guía

Intermec

Intermec PC23d Manual de usuario

Intermec

Intermec EasyCoder 4420 Manual de usuario

Intermec

Intermec EasyCoder PL4 Manual de usuario

Intermec

Intermec PD43 Manual de usuario

Intermec

Intermec EasyCoder 501 E Manual de usuario

Intermec

Intermec PW50 Manual de usuario

Intermec

Intermec PB3 Series Manual de usuario

Intermec

Intermec EasyCoder PD41 Actualización de firmware

Intermec

Intermec PB50 Manual de usuario

Intermec

Intermec PB42 Manual de usuario

Intermec

Intermec 3240 Manual de usuario

Intermec

Intermec EasyCoder F2 Manual de usuario

Intermec

Intermec PM4I Manual de usuario

Intermec

Intermec EasyCoder PC4 Manual de usuario

Intermec

Intermec PR2 Manual de usuario

Intermec

Intermec 6820 Series Manual de usuario

Intermec

Intermec 6820 Series Manual de usuario

Intermec

Intermec PR2 Manual de usuario

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario